Issues
- 1
How to Upload firmware?
#99 opened by cnn123666 - 0
only echo state when there's a change
#81 opened by charlie-haley - 1
Move firmware to TinyGo
#62 opened by charlie-haley - 4
- 0
firmware to detect connected fans
#82 opened by charlie-haley - 1
Support for user-configurable fan-curves
#10 opened by charlie-haley - 1
Assign friendly device identifier
#54 opened by charlie-haley - 0
add EEPROM to PCB
#80 opened by charlie-haley - 1
investigate need for EEPROM
#79 opened by charlie-haley - 0
- 1
build gerber files as part of the pipeline
#72 opened by charlie-haley - 0
LEDS not functioning as expected on the PCB
#76 opened by charlie-haley - 0
- 0
Use config for CLI
#3 opened by charlie-haley - 0
Use config for GUI
#4 opened by charlie-haley - 1
- 2
Add tachometer support
#6 opened by charlie-haley - 0
Add support for multiple temp sensors
#8 opened by charlie-haley - 1
Serial IO randomly breaks
#37 opened by charlie-haley - 2
Improve Documentation
#40 opened by charlie-haley - 0
Optimise PR checks
#56 opened by charlie-haley - 0
Select default theme using JS matchMedia
#57 opened by charlie-haley - 0
Set application icon
#59 opened by charlie-haley - 0
- 0
Create 3D Model for case
#66 opened by charlie-haley - 2
Create revision 4 PCB
#65 opened by charlie-haley - 1
GitHub Actions hang
#70 opened by charlie-haley - 3
2 clicks needed to register an event
#29 opened by charlie-haley - 1
TX/RX Issues with rev 2 PCB
#45 opened by charlie-haley - 0
"Molex" 4 Pin Connector wrong way around
#46 opened by charlie-haley - 1
PCB Improvements
#27 opened by charlie-haley - 1
Create PCB Designs/Circuit Diagram
#9 opened by charlie-haley - 1
Add Neopixels LED support
#7 opened by charlie-haley - 1
More accurate thermistor readings
#2 opened by charlie-haley