Issues
- 0
Update servo control vesc instructions
#75 opened by ajak2k - 1
- 1
Master BOM not available
#70 opened by szilu7 - 1
Problem while driving two cars at the same time
#74 opened by ruks001 - 3
Problem in setting up driver stack
#73 opened by ruks001 - 0
Rviz simulation
#68 opened by MohammedBaniAteyeh - 0
Devices change option
#57 opened by slaszlosz - 0
NX Notes
#53 opened by JWhitleyWork - 0
Top-Level Reorganization
#52 opened by JWhitleyWork - 1
BOM Typo -> Intel Realsense d345i
#55 opened by tomisom - 5
- 0
Document link broken?
#48 opened by jacksilb - 0
- 8
Logitech Controller Not Working
#43 opened by alxtee - 1
Bullet connector labels are incorrect
#39 opened by kimnluong - 3
A problem in documentation
#35 opened by sadransh - 4
VESC HW 4.12
#31 opened by jasilberman - 3
Latest VESC Tool - No VESC_servoout.bin
#30 opened by jasilberman - 0
Documentation - 2. Driving Car
#21 opened by jasilberman - 3
Installing ROS
#19 opened by jasilberman - 1
Flashing the TX2 with the Orbitty Carrier
#8 opened by jasilberman - 1
- 1
Approximate Time Investment: 5-7 hours?
#6 opened by jasilberman - 2
Building the Car - Bill of Materials:
#7 opened by jasilberman