Issues
- 1
sanguino.cc unavailable
#37 opened - 0
- 0
- 1
Serial.begin(speed, config) failure
#34 opened - 1
- 2
Enabled JTAG in hfuse is preventing the endstop detection for reprap with Marlin to work properly
#32 opened - 2
- 2
- 3
Remove core from the distribution.
#29 opened - 10
SoftSerial support
#28 opened - 6
Compilation issues with Arduino IDE 1.01 during 'Verify' stage while using Sanguino-0101r1
#27 opened - 2
lack of internal VREF support
#26 opened - 2
- 5
Support for OneWire 2.1
#24 opened - 2
ATmega644p UARTS are dead !
#23 opened - 7
ATmegaBOOT_644P.hex file missing
#22 opened - 14
Add support for ATmega644 and ATmega644A
#21 opened - 16
Arduino v1.0 compatibility
#20 opened - 2
sdfatlib support on sanguino
#19 opened - 9
- 4
- 2
invalid device signature
#16 opened - 4
- 2
- 1
- 3
- 11
- 1
Bootloader does not load EEPROM properly
#10 opened - 2
644P Pin Out Diagram is wrong
#9 opened - 2
- 1
- 0
Document bootloader build process
#6 opened - 1
SAnguino
#5 opened - 1
SAnguino
#4 opened - 1
SAnguino
#3 opened - 2
- 1
Timer0 interrupt bloated
#1 opened