hudbrog/gCodeViewer

Issues

• Not all GCode have the file extensions .gcode

  #95 opened 2 years ago by tgolla
  0

• Feature request: when the sliders are at a certain line of a certain layer, allow to identify the location in the gcode file.

  #86 opened 4 years ago by zapta
  3

• Request: Support G2 and G3 codes for arcs

  #40 opened 9 years ago by manticorp
  7

• Feature-request: Exclude Layers

  #91 opened 3 years ago by mr-who2012
  1

• Gcode Viewer 1 of a kind

  #94 opened 3 years ago by Killerkwile1
  1

• Unrecognized Gcode Filetype

  #93 opened 3 years ago by GollyRojer
  1

• Doesn't process sources running locally on FF

  #90 opened 3 years ago by Farbhead
  1

• Show temperature on layer?

  #54 opened 7 years ago by DFliyerz
  1

• Question: Is possible to run gCodeViewer locally without docker?

  #88 opened 4 years ago by lucky62
  4

• Request: Total time spent to get to layer

  #56 opened 7 years ago by Jikiya
  2

• Gcode files with no extrusion in them will not render

  #69 opened 7 years ago by zsoltmar
  2

• Open gcode files from URL

  #82 opened 5 years ago by johnsonm
  1

• Upload should allow .ngc extension please

  #81 opened 5 years ago by andrewerrington
  0

• Cannot open my G-code

  #80 opened 5 years ago by bullestock
  1

• Feature request: hide grid in 2d tab

  #79 opened 5 years ago by RingedNebulae
  0

• Feature Request: Customizable colour in 3D view

  #78 opened 5 years ago by qwertpi
  0

• feautere request server side sample files list

  #77 opened 6 years ago by ldijkman
  0

• Wrong flowrates are calculated when firmware uses volumetric E

  #72 opened 6 years ago by Artefact2
  1

• gcode.ws domain expired

  #74 opened 6 years ago by helaan
  2

• request : gradient color in 2D view

  #71 opened 6 years ago by minitelrose
  0

• feature request

  #70 opened 6 years ago by merlin77777777
  0

• Flow rate colors need binning

  #42 opened 9 years ago by ednisley
  3

• Save the 3D model

  #37 opened 9 years ago by Ymcsee
  1

• Does not work for milling files. Gives no error message.

  #48 opened 8 years ago by jimls
  3

• Allow input of X, Y, (and Z) offsets for each extruder

  #68 opened 7 years ago by b-morgan
  0

• High memory consumption for a big GCODE

  #66 opened 7 years ago by bzamecnik
  0

• Feature request: measurement tool

  #65 opened 7 years ago by sensille
  0

• Previous errorList is not cleared when new file was loaded.

  #63 opened 7 years ago by AndWalu
  0

• Light source for 3D view is positioned wrong

  #62 opened 7 years ago by Bird2010
  0

• G90 command (absolute positioning) should not undo effect of M83 command (relative E)

  #60 opened 7 years ago by DrLex0
  1

• Time with an 0 \o/

  #61 opened 7 years ago by tanguyp14
  0

• Spiral vase mode oddity - layer view only shows corners?

  #43 opened 9 years ago by JBKingdon
  2

• Feature request: model info export in the clipboard

  #59 opened 7 years ago by andreagambi
  0

• Feature Request: Calculate Center of Mass

  #58 opened 7 years ago by owenwp
  0

• Is it a bug?

  #57 opened 7 years ago by h2CSO
  0

• gCodeViewer "skips" a layer

  #53 opened 7 years ago by b-morgan
  2

• Allow loading of .gx files

  #50 opened 7 years ago by btzy
  3

• Feature Request: Arrows on 2D Layer Scroll Bar (i.e. +1, -1 buttons)

  #52 opened 7 years ago by b-morgan
  1

• Speed in mm^3/s how to calculate?

  #51 opened 7 years ago by lecosantana
  0

• Feature Request: Text view of gcode

  #46 opened 8 years ago by chriscamacho
  1

• Bug in renderer3d then also breaks 2D view

  #49 opened 7 years ago by Clotoo
  2

• tiny gcode visualizer lib for tiny webserver

  #47 opened 8 years ago by mkeyno
  6

• ModelInfo produces many NaN's

  #45 opened 8 years ago by rkblackfire
  0

• Feature Request: Show calculated extrusion width when mouse points to a extrusion track.

  #44 opened 8 years ago by ReeseWang
  0

• 3D view doesn't work

  #41 opened 9 years ago by Maaajaaa
  0

• filename in parameter

  #38 opened 9 years ago by g7425072
  1

• Running converted PyCAM Gcode on gCodeViewer

  #32 opened 9 years ago by VirToReal
  3

• Feature Request :Pricing

  #33 opened 9 years ago by MasterCATZ
  1

• Wrong flow rate colors?

  #36 opened 9 years ago by alranel
  3

• Feature Request - Layer advance button

  #34 opened 10 years ago by gajtguy
  1