huizebruin/s0tool

Issues

• High spikes in solar kWh meter measurement

  #210 opened a month ago by RobPijpers
  3

• KWH meter stand niet op nul kunnen beginnen

  #209 opened a month ago by BenLukken
  3

• Failed config during update

  #203 opened 2 months ago by wes1993
  8

• Problemen with update

  #180 opened 2 months ago by huizebruin
  4

• s0tool is not compiling in ESpHOME

  #173 opened 2 months ago by samimasad
  1

• Meterstand werkt niet bij

  #171 opened 3 months ago by cschillings
  3

• Does not work after rebooting

  #165 opened 6 months ago by dychonn
  2

• add initial meter total in ESPhome

  #156 opened 6 months ago by stingone
  2

• S0tool flux and puls can't install

  #144 opened 8 months ago by PasekJ
  3

• How to install gasenwater

  #145 opened 8 months ago by PasekJ
  3

• ESPHome update issue - "Pin 4 is used in multiple places"

  #150 opened 8 months ago by makkie2002
  11

• changing port and board

  #136 opened 9 months ago by alexswart
  1

• How to update

  #135 opened 9 months ago by cyberfilou
  3

• downside of ESP32?

  #138 opened 9 months ago by bkbartk
  8

• Use internal pull-up/down resistors

  #127 opened 10 months ago by vincentwolsink
  7

• sensor.totaal_opgebracht indicates higher then normal during higher pulsrates.

  #96 opened a year ago by ThomasVerl
  6

• Help with Maddalena CD One TRP

  #77 opened a year ago by wes1993
  23

• Sensor watermeter stand

  #35 opened 2 years ago by ydeschoe
  8

• Support for esp01_1m or esp32dev

  #125 opened a year ago by BDV77
  2

• It looks like there is an issue with the calculation of the total water amount

  #108 opened a year ago by MPJK77
  7

• Wemos D1 mini pro CP2104 not able to flash s0tool

  #101 opened a year ago by MPJK77
  7

• how to assign static IP address to s0tool

  #119 opened a year ago by AppleFlapp
  5

• Different pin configuration

  #95 opened 2 years ago by laemen
  4

• diy watermeter install from https://huizebruin.github.io/s0tool/

  #109 opened 2 years ago by DoerakkerHA
  5

• sensor sometimes registers usage while there is no water consumption

  #100 opened 2 years ago by joost01
  5

• And how can i install the config on a board: nodemcuv2 ?

  #110 opened 2 years ago by maartentmm
  1

• Measuring two water meters with one ESP

  #83 opened 2 years ago by kalutep
  2

• yaml errors

  #85 opened 2 years ago by gwittenaar
  2

• Updated to v22.11.25: Watermeter stand has 4 digits after the comma

  #78 opened 2 years ago by JGeeforce
  4

• Pulse Sensor Water OFF

  #76 opened 2 years ago by wes1993
  3

• Blueprint does not work for watermeter

  #69 opened 2 years ago by balk77
  1

• Meterstand bijwerken probleem / Update meter reading problem

  #64 opened 2 years ago by huizebruin
  2

• Sensor watermer_totaal too high?

  #70 opened 2 years ago by SanderRutten
  2

• Change version type

  #63 opened 2 years ago by huizebruin
  1

• How to update manually via EspHome

  #55 opened 2 years ago by zjean
  1

• [FR] Add list for water meters

  #56 opened 2 years ago by el97
  1

• When using s0tool/esphome/watermeter.yaml it reports every pulse as 3.6L instead of 1.0L

  #19 opened 2 years ago by compacthack
  4

• Pieken in opbrengst / verbruik

  #13 opened 2 years ago by huizebruin
  0