hzeller/beagleg

Issues

• prussdrv_open fails with latest BB images

  #28 opened 2 years ago by Stewels
  9

• Repeated small move

  #64 opened 2 years ago by jimtesson
  3

• ESTOP should clear any internal queue

  #65 opened 2 years ago by lromor
  0

• Aux outputs and input issues

  #63 opened 2 years ago by chronma
  0

• Problem about endstop setting for A B or C axis

  #20 opened 8 years ago by Dark-Guan
  4

• '/sys/devices/bone_capemgr.*/slots': No such file or directory

  #48 opened 3 years ago by monomente
  12

• While in soft-estop: motors disabled (good), but no error reported when attempt to move.

  #58 opened 3 years ago by hzeller
  0

• Build-system: make `test-binaries` only settles with the second call to make

  #52 opened 3 years ago by hzeller
  0

• E-Stop input is not checked

  #35 opened 7 years ago by bigguiness
  1

• [Discussion] What to put in the status server ?

  #38 opened 7 years ago by hzeller
  12

• [feature] m command for get parser state

  #37 opened 7 years ago by holla2040
  9

• Testing with PostScript output broken

  #36 opened 7 years ago by hzeller
  2

• homing does not work when step is too large

  #23 opened 8 years ago by aboitor
  3

• Small feed-rate: M114 shows zero and eventually hangs

  #32 opened 7 years ago by hzeller
  1

• make test doesn't run all the tests

  #27 opened 7 years ago by lromor
  1

• Explore if eHRPWM can also be used for PWM generation

  #25 opened 8 years ago by hzeller
  3

• Warn if a pin-mapping for PWM is mapped to an unsupported pin

  #24 opened 8 years ago by hzeller
  0

• Queue status

  #7 opened 8 years ago by lromor
  9

• [feature] Arc speed profile with jerk control

  #8 opened 8 years ago by lromor
  3

• Kernel 4.1+ remoteproc

  #6 opened 8 years ago by lromor
  6

• [feature] Add external encoder feedback

  #11 opened 9 years ago by lromor
  1

• Is there a plan to add more kinematics transformation to fit more different machine?

  #16 opened 8 years ago by Dark-Guan
  2

• beagleG runs on debian 8.3 problem, These is problem to Enable the STEP

  #14 opened 8 years ago by Dark-Guan
  3

• Alignment trap: not handling instruction f843ec10 at [<00014c9a>]

  #13 opened 9 years ago by mikikg
  5

• "Bus Error" - FYI

  #4 opened 10 years ago by maggiewhite
  2

• Attempting to send simple g-code snippet and watch X motor move

  #3 opened 11 years ago by MantisClone
  8

• Attempting to build the pasm PRU assembler

  #2 opened 11 years ago by MantisClone
  2

• Attempted beagleg-cape-pinmux.sh

  #1 opened 11 years ago by MantisClone
  7