Issues
- 0
- 1
Beeper output stops working after GPS lock in Inav 7.1.0
#10106 opened by wchnflr - 0
HGLRC M100-5883 GPS Compass Module // Barometer issue
#10110 opened by KingsKazuma - 0
- 3
- 0
TMOTORF7V2 target need to add ICM42688 gyro support
#10107 opened by dengdizzy - 13
FBUS is not working
#10105 opened by pandjarov - 2
- 1
search zone (releases page) and links
#10097 opened by Olivier-OO - 3
- 29
GPS Not working / Reset when upgraded to iNav 7
#10089 opened by cpwilson - 4
Servos won't initiate
#10057 opened by InzynierMamon - 6
inav7.1.1 with optflow senser(micoair MTF-01) can't hold altitude on althold mode
#10025 opened by KONG8691 - 10
INAV 7.1 equipped glider goes BANANAS when RTH is turned on
#10076 opened by Mafracao - 0
Arrow direction in blackbox not same INAV
#10084 opened by HoVietHien - 4
QUADCOPTER MOVE FORWARD
#10085 opened by HoVietHien - 4
ESC not recognized.
#10074 opened by Eliot-fpv - 1
ESC PROTOCOL
#10072 opened by HoVietHien - 1
PID Settings
#10087 opened by HoVietHien - 1
HDzero Video Feed appearing black when using MSP
#10091 opened by Ombiflight - 6
The output of F7 flight control motor is abnormal
#10088 opened by YangChen1234 - 7
VSpd telemetry error accumulates in flight
#9987 opened by dingrgh - 3
MATEKF405TE INAV 7.1 Quadcopter wobbles badly. Resolved
#10039 opened by Phil-MC - 19
- 0
Show active battery profile in OSD
#10079 opened by Vins1417 - 6
inav_use_gps_no_baro testing and code review indicates erroneous description?
#10040 opened by sensei-hacker - 7
Motor speed up by themselves
#10069 opened by HoVietHien - 3
NEUTRONRCF435MINI AIO Incorrect UART3 pin assignment
#10059 opened by WizzardDr - 6
wrong altitude and longitude values on OSD screen
#10063 opened by ZipovUA - 2
UAV is levelled more than 25 degrees
#10050 opened by dereksynkopa - 0
Battery Remaining Percentage value in OSD
#10053 opened by dereksynkopa - 9
- 16
- 10
GPS HGLRC M100 5883 is taking a long time to capture and fix satellites on inav 7.1
#9994 opened by Marvin1972 - 1
Speedybee F745 35A AIO
#10030 opened by texelmicro - 2
Servos not smooth
#10026 opened by ammikey - 6
- 1
Show calibration status of sensors on status output
#9997 opened by mmosca - 1
Failsafe activated by mistake
#10019 opened by GTFreeFlyer - 1
- 5
iNav custom target for servo on LED pin
#10017 opened by masterguy29 - 0
FLYWOO F745 motor mapping incorrect in iNav version 7
#10018 opened by wsiok - 5
- 1
Please use the actual rate.
#10013 opened by jsungho - 15
Flashed INAV 7.1.0 to speedybee f405 and had issues on quad crash, the motors wouldn't stop.
#10003 opened by Al05ex - 5
Osd doesn't switch to HD with HDZERO
#10001 opened by Pascal687 - 2
OSD for analog shows wrong stuff in INAV 7.1.1
#10000 opened by wterreb - 3
- 4
- 4
SITL: inable to select serial receiver
#9986 opened by RomanLut