jandelgado/jled

Issues

• Question/Feature: Get current brightness

  #117 opened a year ago by d3jong
  13

• Request: Make Update(uint32_t now) public

  #129 opened 17 days ago by paoSoft
  1

• LowActive() causes weird Fade behaviour

  #128 opened 4 months ago by RossAWaddell
  5

• Delay only working for low values

  #127 opened 9 months ago by BjornB2
  3

• How to control 15 gpio pins

  #119 opened 10 months ago by aGGreSSiv
  8

• Is there a way to use a single JLED to control a bicolor led?

  #123 opened a year ago by Rimbaldo
  2

• Return pin's previous state after Blink is over

  #120 opened a year ago by peros550
  2

• Update() not returning false for On()

  #126 opened a year ago by danyhm
  4

• Simulate PWM for all pins to enable PWM for all pins without hardware PWM

  #125 opened a year ago by danyhm
  1

• Repeat() and DelayAfter() on the same effect in a sequence

  #122 opened a year ago by mattbk
  4

• Minimum brightness

  #99 opened 2 years ago by Welsyntoffie
  8

• Make fade-resolution choosable

  #110 opened a year ago by hansimglueck
  5

• jled to control RGB?

  #108 opened a year ago by RossAWaddell
  7

• FadeTo method

  #66 opened a year ago by JuMiLo
  15

• times in millis should be 32bit values

  #109 opened a year ago by hansimglueck
  3

• JLedSequence.Stop() not working

  #115 opened a year ago by arkypita
  1

• CTRL_ANODE

  #113 opened a year ago by mcsarge
  4

• Evolution for non PWM pins

  #107 opened 2 years ago by LaurentR59
  2

• Blink twice

  #103 opened 2 years ago by diesel437
  2

• Why is 'MinBrightness' not in red font

  #111 opened 2 years ago by greyczj
  2

• Extend JLedSequence with and ability to suspend it (On/Off).

  #48 opened 4 years ago by 3dluvr
  2

• Candle to turn off after effect.

  #92 opened 2 years ago by Tezzatron81
  12

• User provided functions never get to max `t`

  #85 opened 2 years ago by TheLastGimbus
  3

• Change PWM base frequency

  #96 opened 2 years ago by Mark-81
  4

• Question: How to pass to funtion

  #97 opened 2 years ago by BernhardSchlegel
  2

• Multiple HALs

  #95 opened 2 years ago by troky
  7

• can the candle or other examples be ran inside a function

  #91 opened 3 years ago by Tezzatron81
  0

• FadeOn and stay on forever

  #88 opened 3 years ago by oscgonfer
  7

• Change effect works in setup() only

  #90 opened 3 years ago by Mark-81
  4

• Pulse LED?

  #84 opened 3 years ago by RossAWaddell
  6

• Update MaxBrightness Dynamically?

  #82 opened 3 years ago by RossAWaddell
  5

• how can i use to pca9685

  #76 opened 3 years ago by K0rkunc
  5

• 255 value change 4095 how to

  #77 opened 3 years ago by K0rkunc
  2

• DelayAfter value not cleared by Stop?

  #75 opened 3 years ago by voidcreatrix
  8

• Arduino Mega Pin issue

  #70 opened 4 years ago by sjpiper145
  3

• adding MinBrightness function

  #72 opened 4 years ago by MaxDiDo-rgb
  3

• Add number (limit ) of blinks

  #74 opened 4 years ago by Rimbaldo
  0

• Chain sequences together

  #46 opened 4 years ago by 3dluvr
  3

• Change exisiting effect

  #52 opened 4 years ago by anam-zahid
  3

• Various ESP32 pins do not work properly

  #47 opened 4 years ago by 3dluvr
  11

• Reset fuction not restarting code

  #65 opened 4 years ago by sjpiper145
  7

• Forever() not working for sequences

  #68 opened 4 years ago by diematte
  3

• ESP32 Unable to define channel

  #62 opened 4 years ago by Johnymalina
  3

• How to switch LED's current effect inside loop()

  #64 opened 4 years ago by StarterCraft
  2

• FadeOff leaves LED glimming

  #60 opened 4 years ago by marmil
  7

• Brightness Logic Inverted

  #59 opened 4 years ago by ItzHaad
  3

• Not able to turn blinking on after stopping it.

  #56 opened 4 years ago by wesolykapselek
  5

• ESP32 Non-linear period when set longer than 65000ms

  #55 opened 4 years ago by Didgeridrew
  2

• Compiler fails invalid conversion from int to PinName Nano Sense 33 BLE

  #53 opened 4 years ago by Naphier
  6

• Various questions

  #51 opened 4 years ago by harueg
  2