jbruce12000/kiln-controller
Turns a Raspberry Pi into an inexpensive, web-enabled kiln controller.
JavaScript
Issues
- 15
Auto tune issue
#182 opened by MeltTechAu - 11
error on setup
#179 opened by djs1969 - 4
Random no connection with max31856 and quits
#137 opened by MeltTechAu - 5
Thermocouple Issue
#178 opened by gumboman4 - 4
Server connection issue
#181 opened by Maditiss - 2
Subprocess Exited with error
#183 opened by TheHarmacist - 35
Down ramp sensor temp gets stuck
#184 opened by MeltTechAu - 4
emergency shut off bug
#185 opened by jbruce12000 - 9
- 1
Refactor and Test
#131 opened by chipgarner - 2
Max31856 thresholds (not a issue)
#165 opened by Linkeor - 3
profile - always store using C or F
#134 opened by jbruce12000 - 8
Issue with temperature reading
#177 opened by lluisllenas - 1
- 1
Cone MODE Feature Nearly Going ,! need a hand with buttons on front end Anyone??? So close Jbruce
#162 opened by MeltTechAu - 30
- 30
Moving from Master branch to Blinka
#169 opened by artcank - 68
Master to blinka branch
#163 opened by captaincaden - 10
31856 and type S not working
#171 opened by giorgiodidon - 8
SSR working in reverse
#159 opened by salperta - 1
[Feature Request] Make usable for wood kiln by adding hygrometer input <-> on/off dehydrator output
#176 opened by u2n - 12
Real temperature <> Kiln-controller
#174 opened by We-Sing - 1
Actions seem to be reversed
#180 opened by twilson42001 - 27
Support for N-Zone Control
#173 opened by kulps - 3
- 3
Not an issue, PID tuning frequency
#166 opened by captaincaden - 2
High Volume Network and CPU consumption due to continuous sending of config from backend to web.
#164 opened by chriswhsu - 55
- 18
- 26
31856 config
#157 opened by antipop001 - 12
Kiln stopped after 6h
#148 opened by whomble - 16
Max 31856 in s or r mode floating temp 20 deg out
#138 opened by MeltTechAu - 3
Watcher while jobs are idle
#150 opened by antipop001 - 1
- 13
Another question
#154 opened by antipop001 - 2
- 11
query thermocouple
#151 opened by BeatrootRissole - 3
More Question than Issue about Watcher
#149 opened by antipop001 - 5
Trigger SSR
#145 opened by antipop001 - 12
SSR power
#144 opened by antipop001 - 1
state.json: excessive sd card writes
#143 opened by thadwald - 7
Schedule taking much longer than specified
#142 opened by sactheskydiver - 3
relay behaving opposite of intended.
#141 opened by sactheskydiver - 5
MAX31855 25th bit not working
#139 opened by harthenry - 2
- 7
Daylight savings time, kiln stopped.
#135 opened by captaincaden - 2
- 1
Great project
#130 opened by steeleh - 8
Fast Simulator
#122 opened by chipgarner - 3
Small bug in blinka branch
#125 opened by chipgarner