jclehner/nmrpflash

Issues

• procedure entry point pcap_set_immediate_mode could not be located...

  #135 opened a year ago by AlexcFrench
  5

• Received CONF_REQ while waiting for TFTP_UL_REQ!

  #159 opened a month ago by Arice321
  1

• R9000 unable to connect

  #158 opened a month ago by Stack303
  1

• Checksum error on everyone I've tried so far

  #157 opened 2 months ago by dgrant88
  1

• RBS50, No response, or forcibly closed in blind mode

  #156 opened 3 months ago by TDuxis
  1

• R9000 Nighthawk - No response after 60 seconds. Bailing out.

  #155 opened 4 months ago by dreamgeekcoder
  1

• R8000 - Stuck on Ack(0)

  #143 opened 10 months ago by pato-pan
  4

• nmrpflash -L to give Netgear Device name

  #154 opened 3 months ago by shaddu
  1

• Received configuration request from 00:00:00:00:00:00

  #151 opened 5 months ago by maddoglee
  11

• Cannot rollback to recent versions of factory firmware after rolling back from DD-WRT on Netgear R7000

  #152 opened 6 months ago by Sopheus
  3

• fail on R6220 'brick' - "sendto: Operation not permitted"

  #148 opened 7 months ago by antipodes5
  17

• Cannot flash firmware to R7000P

  #153 opened 5 months ago by ucheolowoyeye
  2

• Flashing DG3000D

  #150 opened 6 months ago by AnonymousWebHacker
  2

• Error: Ethernet cable is unplugged

  #111 opened 6 months ago by DavidUXer
  8

• Netgear R7000 doesnt respond after receiving the firmware

  #129 opened 6 months ago by palealibi
  9

• R6900v2 flash complete but power light stays amber

  #146 opened 8 months ago by phdfloppa
  3

• R6800 transfert OK but solid amber and routeur doesn't ping

  #140 opened a year ago by pierred510
  6

• can't connect on Kali to a Netgear AC1000 R6080

  #141 opened 6 months ago by dtpeters
  14

• Stuck in “Received keep-alive request” state

  #145 opened 6 months ago by david-zzj
  4

• Successfully tested with RBK40

  #149 opened 7 months ago by andrew121410
  1

• Success Flashing AX40 model :)

  #147 opened 7 months ago by Maikboarder
  0

• Orbi RBK753, i just want to change region code,

  #142 opened 9 months ago by ttonyyao
  5

• Invalid Interface

  #144 opened 9 months ago by Schnowzer
  2

• "Ethernet cable is unplugged"

  #139 opened a year ago by hippypink
  3

• R8000 - Timeout while waiting for ACK(1)

  #137 opened a year ago by RillJ
  19

• Unbrick orbi

  #138 opened a year ago by MarinusPretorius
  1

• Netgear 8000 in a reboot loop

  #136 opened a year ago by lvincent81
  1

• procedure entry point pcap_inject could not be loaded in DLL nmrpflash.exe

  #134 opened a year ago by AlexcFrench
  1

• RBR750 - TFTP block rollover. Upload might fail!

  #130 opened a year ago by Goldstino
  18

• Timeout waiting for ACK on RBR40

  #133 opened a year ago by makinbacon21
  2

• Power light stay amber color

  #132 opened a year ago by aleckwyq
  1

• Timeout waiting for Netgear Orbi flash to complete

  #131 opened a year ago by SLKsander
  16

• RBS20 solid amber light

  #126 opened 2 years ago by mynameisgv
  1

• No suitable interfaces found.

  #122 opened 2 years ago by Maple38
  8

• Problems running on Windows

  #125 opened 2 years ago by Stavinair
  1

• Error when attempting to flash MS70 satellite

  #124 opened 2 years ago by hzwas
  1

• Windows instructions not working?

  #121 opened 2 years ago by NfNitLoop
  2

• What commands are available with the -c option?

  #120 opened 2 years ago by jm355
  2

• R8000P flashing problems

  #118 opened 2 years ago by lemonistas
  3

• [EX6100v2] Timeout while waiting for TFTP_UL_REQ

  #119 opened 2 years ago by orowith2os
  2

• R8000P - NMRPflash TFTP Transfer Hang on Recieve Config

  #116 opened 2 years ago by Xiseous
  2

• How does this install or run on windows?

  #113 opened 2 years ago by N3rd-Cub
  1

• Not an issue, a question on RAX35 Version 1 block rollover

  #117 opened 2 years ago by weaver666
  5

• unable to upload firmware to rax200

  #114 opened 2 years ago by paldier
  1

• Trouble flashing router.

  #106 opened 2 years ago by bomkz
  3

• Not able to send initial packet

  #107 opened 2 years ago by CGelet
  2

• IP address marked as deprecated

  #112 opened 2 years ago by yousaf465
  9

• Readme ... waiting time before reboot for user to pay enough attention

  #108 opened 2 years ago by RE3CON
  1

• Flash R8000P OpenWRT image to R7900P

  #109 opened 2 years ago by LokeYourC3PH
  2

• failed to set hardware filter to promiscuous mode

  #104 opened 2 years ago by green1052
  3