knaufinator/6DOF-Rotary-Stewart-Motion-Simulator

Issues

• simtools random movements

  #24 opened 2 months ago by miso521
  1

• What is the difference between GPIO and RMT during initialization？

  #23 opened 5 months ago by crazyzyz
  1

• Android app- need to grab actual parameters when displaying UI, currently defaults parameters.

  #5 opened 9 months ago by knaufinator
  1

• Controller - limit switch fault catch

  #6 opened 5 years ago by knaufinator
  1

• New low pass filter code is not active- needs parameter characterization

  #7 opened 9 months ago by knaufinator
  1

• make pause/estop ramp up a variable set with Android APP

  #9 opened 9 months ago by knaufinator
  1

• PCB - change motor connectors to be a dsub25 from IDC26

  #13 opened 9 months ago by knaufinator
  1

• Simtools Axis settings

  #17 opened 9 months ago by zhai1987
  2

• Adjust position pulse output speed (frequency)

  #19 opened 9 months ago by 1248280302
  5

• Amazon product purchase link has expired

  #20 opened 9 months ago by HUANGJIN169
  1

• License terms

  #21 opened 9 months ago by wotupfoo
  3

• Is there how it works detailed docs in this project?

  #22 opened 9 months ago by dlutxg
  1

• simtools is free open source？i cant find it website

  #16 opened 3 years ago by zouzhe1
  4

• sensor array - needs wire labels on PCB

  #14 opened 5 years ago by knaufinator
  1

• Center of Rotation shift - correction of motion data for driver position offsets

  #8 opened 5 years ago by knaufinator
  1

• accelerator/clutch/brake pedals

  #12 opened 5 years ago by shubin
  1

• PCB shop having issues with 6mil track size on PCB

  #11 opened 5 years ago by knaufinator
  1

• Wrong PCB hole diameter

  #10 opened 5 years ago by krotos139
  4

• estop is considered Normally closed, if you dont have an estop hooked up the platform will not run. have periodic warning in console to help with debugging.

  #4 opened 5 years ago by knaufinator
  1

• Soft estop/pause - On resume... slowly goto requested position

  #2 opened 5 years ago by knaufinator
  1

• Filter parameters are reversed, ... from 0 - 100 : 100 = no filter, 0 = all filter

  #3 opened 5 years ago by knaufinator
  1

• Intensity Control via BLE, or other

  #1 opened 5 years ago by knaufinator
  1