knifter/DualPID

Issues

• Support GP8413 DAC

  #75 opened 7 months ago by knifter
  1

• Implement: RTC module

  #67 opened 7 months ago by knifter
  1

• Show unsaved settings state on screen

  #46 opened a year ago by knifter
  1

• Implement rudimentary external setpoint control (UART)

  #76 opened 7 months ago by knifter
  1

• Support WT32SC01 3.2" Touch screen

  #71 opened 10 months ago by knifter
  0

• Control Backlight

  #74 opened 8 months ago by knifter
  0

• NCIR Thermometer Sensor

  #73 opened 10 months ago by knifter
  0

• Support external H-Bridge v1.1 Unit

  #72 opened 10 months ago by knifter
  0

• Logging/Status to MQTT

  #69 opened 10 months ago by knifter
  1

• WiFi enable+configuration

  #70 opened 10 months ago by knifter
  0

• Logging to SD

  #68 opened 10 months ago by knifter
  0

• Sensor loop time per sensor

  #49 opened a year ago by knifter
  1

• Sensor functions should be classes

  #62 opened 10 months ago by knifter
  1

• pidloop status should have different statuscode when stable and waiting on lock

  #66 opened a year ago by knifter
  1

• Make the horizontal scale labels of the graph more functional

  #37 opened 2 years ago by knifter
  0

• if isnan(output) the output bar shows 100%

  #31 opened a year ago by knifter
  1

• PID Lock detect time is not correct

  #64 opened a year ago by knifter
  1

• PID lock detect in percent

  #63 opened a year ago by knifter
  0

• remove MAX31865 delay()

  #60 opened a year ago by knifter
  0

• Fixed output could be ratio of max_output

  #65 opened a year ago by knifter
  0

• OutputDriver should provide output limits to PIDLoop.

  #58 opened a year ago by knifter
  0

• Scale PID inputvalue or sensor output value

  #57 opened a year ago by knifter
  1

• Implement FastPWM outputdriver

  #56 opened a year ago by knifter
  1

• OutputDriver selection

  #59 opened a year ago by knifter
  0

• Split menu per channel

  #61 opened a year ago by knifter
  0

• Output_mode can be determined depending on PIN-, PIN+ configured

  #54 opened a year ago by knifter
  1

• Keep expert_mode enabled until turned off in menu

  #55 opened a year ago by knifter
  1

• Set output to fixed value

  #52 opened a year ago by knifter
  1

• Output Max Duty Cycle

  #27 opened a year ago by knifter
  2

• Sensor type configurable in menu for each channel

  #53 opened a year ago by knifter
  1

• Implement D-term (or input) lowpass filter

  #28 opened a year ago by knifter
  2

• Add SprintIR co2 Sensor support

  #44 opened a year ago by knifter
  1

• Add MAX31856 Thermocouple support

  #43 opened a year ago by knifter
  1

• Implement (lineair) Forward term

  #38 opened a year ago by knifter
  1

• Take back half

  #26 opened 3 years ago by knifter
  1

• Calibration value for sensor

  #47 opened a year ago by knifter
  0

• Configure data-type

  #48 opened a year ago by knifter
  1

• Store intergral values in settings if locked to give it a good startingpoint at startup/reboot

  #45 opened a year ago by knifter
  1

• Show output state with LED widget in PID panel

  #40 opened 2 years ago by knifter
  0

• Remote logging

  #25 opened 3 years ago by knifter
  0

• soogh: Fix menu crash

  #42 opened a year ago by knifter
  0

• Normalize (100%) PID loop input/output

  #32 opened a year ago by knifter
  0

• Key sticks if startup with Key_A or key_C pressed

  #35 opened 2 years ago by knifter
  1

• gui.popScreen in menu.cpp crashes the application

  #41 opened 2 years ago by knifter
  1

• Do not print output bar when channel is sensor only

  #39 opened 2 years ago by knifter
  1

• Output still goes up and down (sometimes) when at 100% output

  #36 opened 2 years ago by knifter
  0

• Configure graph speed in settings

  #34 opened 2 years ago by knifter
  1

• Hide Engineering-mode settings in menu

  #33 opened 2 years ago by knifter
  1

• Restart when pid 1 or 2 is set to active.

  #30 opened 3 years ago by knifter
  0

• Temper Graph scaling

  #29 opened 3 years ago by knifter
  1