Web UI/MarlinESP access point configuration reset

Question

Web UI/MarlinESP access point configuration reset

GameFan01 opened this issue a year ago · 11 comments

Hi,
Is there a way I can reset the access point configuration to factory default?
I think I've accidentally entered an invalid IP address and now the web UI refuses connection every time.

Thank you.

Answer 1 · 2023-05-02T07:38:08.000Z

I solved the problem by using another PC to update. I had to erase the flash on the board using Visual Studio Code. Then I updated the board.

Answer 2 · 2023-05-02T21:43:18.000Z

I solved the problem by using another PC to update. I had to erase the flash on the board using Visual Studio Code. Then I updated the board.

How did you update the board? By reflashing the firmware?

Answer 3 · 2023-05-03T05:13:05.000Z

Yes, using Visual Studio Code and its plugin Platform IO

…

---------- Původní e-mail ---------- Od: GameFan01 ***@***.***> Komu: makerbase-mks/MKS-TinyBee ***@***.***> Kopie: Marcel67921 ***@***.***>, Comment ***@***.*** github.com> Datum: 2. 5. 2023 23:43:32 Předmět: Re: [makerbase-mks/MKS-TinyBee] Web UI/MarlinESP access point configuration reset (Issue #87) " " Problém jsem vyřešil pomocí jiného PC k aktualizaci. Musel jsem vymazat flash na desce pomocí Visual Studio Code. Pak jsem aktualizoval desku. " Jak jsi aktualizoval desku? Přeflashováním firmwaru? — Odpovězte přímo na tento e-mail, zobrazte jej na GitHubu (#87 (comment)) nebo se odhlaste z odběru (https://github.com/notifications/unsubscribe-auth/A7C3WAVYKWEYTEEKV7BSYPLXEF5YBANCNFSM6AAAAAAXPYOWQI) . Dostáváte to, protože jste přidali komentář. Message ID: <makerbase-mks/MKS- ***@***.***> "

Answer 4 · 2023-05-03T16:56:59.000Z

Just tried using the Platform IO "clean" option in VS code. Then I uploaded the firmware provided here by makerbase without modifying anything, and before the upload I used the "forget" option on the Marlin_ESP access point. Nothing changed, it still refuses connections.
Here's my output from compiling and uploading the firmware if you can see something wrong in it:
Compile output.txt

Answer 5 · 2023-05-04T06:24:22.000Z

have you tried initializing the eeprom in the menu settings on the lcd display after uploading the firmware?

…

---------- Původní e-mail ---------- Od: GameFan01 ***@***.***> Komu: makerbase-mks/MKS-TinyBee ***@***.***> Kopie: Marcel67921 ***@***.***>, Comment ***@***.*** github.com> Datum: 3. 5. 2023 18:57:13 Předmět: Re: [makerbase-mks/MKS-TinyBee] Web UI/MarlinESP access point configuration reset (Issue #87) " Just tried using the Platform IO "clean" option in VS code. Then I uploaded the firmware provided here by makerbase without modifying anything, and before the upload I used the "forget" option on the Marlin_ESP access point. Nothing changed, it still refuses connections. Here's my output from compiling and uploading the firmware if you can see something wrong in it: Compile output.txt (https://github.com/makerbase-mks/MKS-TinyBee/files/11385041/Compile.output.txt) — Reply to this email directly, view it on GitHub (#87 (comment)) , or unsubscribe (https://github.com/notifications/unsubscribe-auth/A7C3WASNTVIQOQ44QYNQX7TXEKE6LANCNFSM6AAAAAAXPYOWQI) . You are receiving this because you commented. Message ID: <makerbase-mks/MKS ***@***.***> "

Answer 6 · 2023-05-04T13:10:57.000Z

I tried initializing the eeprom now and the result is still the same.

Answer 7 · 2023-05-04T16:37:33.000Z

i used this I still have the VSC Auto Build Marlin plugin installed Project tasks in Platform IO 1. Erase Flash 2. Build 3. Upload 4. Eeprom initialization check the Configuration.h and Configuration_adv.h settings according to the mks_tinybee board manual https://github.com/makerbase-mks/MKS-TinyBee (https://github.com/makerbase-mks/MKS-TinyBee) index.html.gz and files I used these https://github.com/makerbase-mks/MKS- TinyBee/issues/5(#5) Hopefully it will help you

…

---------- Původní e-mail ---------- Od: GameFan01 ***@***.***> Komu: makerbase-mks/MKS-TinyBee ***@***.***> Kopie: Marcel67921 ***@***.***>, Comment ***@***.*** github.com> Datum: 4. 5. 2023 15:11:12 Předmět: Re: [makerbase-mks/MKS-TinyBee] Web UI/MarlinESP access point configuration reset (Issue #87) " I tried initializing the eeprom now and the result is still the same. — Reply to this email directly, view it on GitHub (#87 (comment)) , or unsubscribe (https://github.com/notifications/unsubscribe-auth/A7C3WAX7CMV4VTG2CLFFNO3XEOTGZANCNFSM6AAAAAAXPYOWQI) . You are receiving this because you commented. Message ID: <makerbase-mks/MKS ***@***.***> "

Answer 8 · 2023-05-04T16:43:56.000Z

Marcel67921 commented a year ago

👍2

Answer 9 · 2023-05-04T18:28:59.000Z

OH MY GOD IT WORKS!
Thank you so much. I thought the board was bricked for good.

Answer 10 · 2023-05-05T04:53:18.000Z

I'm glad it worked out for you

Answer 11 · 2024-01-12T23:43:57.000Z

أنا يتسعدني أن أخصص لك

Thank you very much, I had the same problem and you solved it