Firmware

Question

Firmware

christoels opened this issue 5 years ago · 6 comments

Hi i cant find the firmware for this setup anywhere have a mks 1.0 controller board in my wanhao duplicator 5s mini printer. With the 3.2 tft screen. I dont know much about firmware and have been trying for a week now to get printer to work. Can anyone please please assist would like to use my printer

Answer 1 · 2020-03-11T06:50:00.000Z

You use MKS SGEN_L + MKS TFT32 ? Can you send some image about board and tft32 connect and so on

Answer 2 · 2020-03-11T07:21:05.000Z

Hi yes here is the stuff done on the machine the information i have: MOTHERBOARD - MKS Gen-L 1.0 Controller Board TOUCH SCREEN - MKS TFT 3.2 inch POWER SUPPLY - 400W, 12V, 33A WIFI - MKS ,TFT, Wifi Module HEATED BED - MKS Mosfet Switch for Heated Bed, 25A BUILD VOLUME – 205 x 305 x 185 mm MAX PRINT SPEED – 300 mm/s BOWDEN EXTRUDER - The new MK10 REMOVABLE GLASS – Bulldog clips ENCLOSED PRINTER – Perspex doors LAYER CAPABILITY – 0.02 - 0.3 mm FILLAMENT CAPABILITIES – PLA, ABS, PETG and other common filaments CONNECTIVITY – USB stick, USB cable, WIFI, MKS External SD Card Reader NOZZEL – micro swizz 4.0mm

…

On Wed, 11 Mar 2020, 08:50 makerbase, ***@***.***> wrote: You use MKS SGEN_L + MKS TFT32 ? Can you send some image about board and tft32 connect and so on — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#21?email_source=notifications&email_token=AOZJYXCSXVXGEU7WVDADDXTRG4YCJA5CNFSM4LFN64Y2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEOOLCDI#issuecomment-597471501>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AOZJYXAWTXWETPCMGDWJZSTRG4YCJANCNFSM4LFN64YQ> .

Answer 3 · 2020-03-12T02:55:19.000Z

Hi! The first, you need upload firmware to MKS Gen_L V1.0 and set it:

The second, connect MKS TFT32 by AUX-1 interface and check temp by MKS TFT32 screen. If it can be detected normally, the communication with the motherboard is successful.

Answer 4 · 2020-03-12T06:30:08.000Z

See i dont know how to do all this dont know anything about coding

…

On Thu, 12 Mar 2020, 04:55 makerbase, ***@***.***> wrote: Hi! The first, you need upload firmware to MKS Gen_L V1.0 and set it: [image: image] <https://user-images.githubusercontent.com/12979070/76482594-8aacdd00-644f-11ea-8c91-d026142a2efa.png> The second, connect MKS TFT32 by AUX-1 interface and check temp by MKS TFT32 screen. If it can be detected normally, the communication with the motherboard is successful. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#21 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AOZJYXC3YHY7Z73CPLVBCPDRHBFKJANCNFSM4LFN64YQ> .

Answer 5 · 2020-03-12T06:30:26.000Z

Also dont know which firmware

…

On Thu, 12 Mar 2020, 04:55 makerbase, ***@***.***> wrote: Hi! The first, you need upload firmware to MKS Gen_L V1.0 and set it: [image: image] <https://user-images.githubusercontent.com/12979070/76482594-8aacdd00-644f-11ea-8c91-d026142a2efa.png> The second, connect MKS TFT32 by AUX-1 interface and check temp by MKS TFT32 screen. If it can be detected normally, the communication with the motherboard is successful. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#21 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AOZJYXC3YHY7Z73CPLVBCPDRHBFKJANCNFSM4LFN64YQ> .

Answer 6 · 2020-03-16T02:20:25.000Z

There is firmware in the SGEN_L folder, you can download it and update it.