makerbase-mks/SGEN_L
MKS SGEN_L is a powerful 32-bit 3D printer control board with LPC1768. Support Marlin2.0, Smoothieware. Support MKS LCD12864B/MINI12864/LCD2004/12864 and MKS TFT Touch Screens. The motherboard integrates SPI / UART interface and works with MKS TMC2130/TMC2208 V2.0/TMC2209. It can be used after plugged in. No soldering or flying lead is required ...
C++GPL-3.0
Issues
- 1
Extruder don't move
#54 opened by fabien85100 - 1
TMC2208_STANDALONE homing don't work
#53 opened by fabien85100 - 1
Makerbase mks robin e3d endstops not work
#51 opened by rogeriollorente - 5
MKS SGEN_L V1.0
#49 opened by youngdaddy09 - 11
- 0
- 1
G28 fails to home z axis
#48 opened by doug-scott - 15
- 9
- 15
SGEN_l V1.0 & MKS MINI12864 compatiblity
#44 opened by bacco70 - 18
SGEN-L + MKS TMC2130 TMC connection error
#18 opened by flygja - 12
Problem with Mks Sgen_L V1 and TFT35
#46 opened by acca84 - 6
TMC2208 UART problem
#45 opened by lucasgomezortiz - 2
SGEN_l marlin filament outrun sensor issue
#42 opened by hardy8 - 7
- 5
Adding RGB control
#35 opened by Power3DPrinting - 7
- 11
- 0
Updated marlin firmware and now no heaters
#41 opened by m6cac - 14
tried to update drivers and marlin
#40 opened by m6cac - 6
Firmware
#21 opened by christoels - 3
Marlin 2.0 LCD12864B - Blank Screen, only backlight
#38 opened by NeoMod - 1
Visual Studio Code cant find MKS SGEN L V2
#39 opened by Doyle4 - 7
PWM Pins for RGB Led Strip
#32 opened by Bubolz - 2
- 4
- 1
Endstop Zmax problem
#36 opened by fatihaslan23 - 15
- 1
- 1
Motors not moving
#34 opened by Power3DPrinting - 5
Upload firmware through USB
#28 opened by flygja - 2
What are the Diag jumpers doing ?
#31 opened by Flo082002 - 5
Can't install Marlin either
#27 opened by vxcbnt - 7
- 1
- 1
LCD for SGEN_L
#22 opened by elcatedratico - 7
MKS S Genl sensor less homing tcm2209
#24 opened by helgjohn - 4
I want to use the pt100 thermistor.
#13 opened by SharePARTS - 1
Can't use heated chamber in Marlin
#5 opened by biocrypto730 - 1
Free Digital Output Pin
#16 opened by qukay - 1
More servo pins?
#17 opened by tranqkhue - 2
ISSUES WITH MKS SGEN_L + TFT24
#19 opened by jpoyatos1961 - 0
Configuration.h setting of ENDSTOPPULLUPS
#23 opened by borland1 - 4
- 0
- 2
- 2
Marlin Firmware SD Card Issue
#7 opened by kusuprfn - 2
Print from SDcard on boot
#8 opened by mrhempman69 - 1
Future request: USB 3.0 Support
#6 opened by biocrypto730 - 1