Issues
- 1
Install on Debian 12 Bookworm?
#59 opened by ComputerSmiths - 20
- 2
- 13
Conflicting use with Goodwe Sems Portal
#49 opened by philwild - 4
- 1
no attribute connect
#53 opened by k4r3l01 - 1
Received invalid response
#12 opened by thrawnarn - 9
- 1
Install in Home Assistant Operating System??
#72 opened by luxor97 - 1
Support for MS G3 inverter
#66 opened by yldog9 - 1
Sell / Sold per day
#70 opened by oubrecht-com - 6
Immediate charge to Battery is missing
#37 opened by XanderF - 3
pv mode 1 and 2 switched?
#10 opened by nickelbert - 1
Eco Mode + Discharge Battery
#65 opened by okanano - 7
Add new registers to ET
#57 opened by TomEkk33 - 0
pgridX value meaning
#29 opened by cincuranet - 1
- 1
Connect over modbus rtu
#50 opened by tomp1k - 8
GW20K-ET Some values are always 0
#58 opened by t4e-dev - 4
GW29.9K-ET missing 2nd Battery
#60 opened by MirrorLink700 - 3
- 1
Meter Total Energy import and export swapped
#47 opened by cjgarciao - 5
GW25K-ET Wrong V/A/Power register mappings
#62 opened by AndreiLux - 1
Time sync
#63 opened by oubrecht-com - 1
GM1000 and/or GM3000 Modbus Map?
#56 opened by gonzabrusco - 3
PPV negative value on ET inverter
#51 opened by AdriVillaB - 3
daily statistics for ET inverters
#46 opened by mdughera - 5
How to change General - Eco mode
#44 opened by Dupl3xx - 2
Use of non-default port
#43 opened by m-jarzebowski - 3
Standby mode?
#42 opened by liebefuroscar - 2
- 2
Improve support for MS models
#41 opened by sjtrny - 1
e_day_imp returns no data
#40 opened by gustonator - 1
HomeKit support?
#18 opened by jay-oswald - 3
1500 XS, FW 1.53.50 not working
#25 opened by kbfifi - 2
Confused about power readings
#32 opened by jacereda - 1
exported grid in a day?
#33 opened by apadilla83 - 1
e_day_imp without value
#39 opened by AdriVillaB - 3
Inverters With 4 MPPTs
#38 opened by melvanderwal - 37
values for GW5000S-BP don't seem to match up
#20 opened by oziee - 2
Error message about 149 != 149 is confusing
#27 opened by lyricnz - 4
Sorry - fundamental question about how to setup?
#24 opened by lyricnz - 2
Incorrect values for ES series?
#23 opened by gamosoft - 6
- 6
Support for ESA models
#21 opened by gamosoft - 3
- 2
Enhancement - set mode
#16 opened by Krata4 - 0
Meaning
#11 opened by fabiopedrosa - 2
setup.cfg references a file "VERSION"
#8 opened by onkelbeh - 7