misan/dcservo

Issues

• It posible to use for bldc or pmsm?

  #85 opened 9 months ago by artayasa
  1

• Direction in ATTiny85

  #84 opened 2 years ago by alifilhan0
  4

• Can i use a encoder with step only instead of a quadrature encoder

  #52 opened 6 years ago by Animalrsa1
  23

• BTS7960

  #83 opened 2 years ago by patracy
  1

• the problem is failure

  #82 opened 2 years ago by Overspeed666
  2

• two motors one nano

  #37 opened 7 years ago by pppalain
  67

• 2 pin IR phototransiator in place of 3 pin Receivers with ATTiny85

  #81 opened 3 years ago by alifilhan0
  3

• attiny85 pins

  #41 opened 7 years ago by pbbob
  10

• can i use this code for stepper close loop

  #80 opened 4 years ago by saeedkh11
  1

• Any plans to port to ESP32 ?

  #77 opened 4 years ago by kotopuz
  8

• arduino mega

  #79 opened 4 years ago by takfa1992
  2

• Help with open collector encoder.

  #78 opened 4 years ago by kotopuz
  3

• ISR error

  #76 opened 4 years ago by kotopuz
  1

• Cant understand code

  #75 opened 4 years ago by kotopuz
  1

• Free nano shield blueprint

  #73 opened 4 years ago by MarcinanProfesjonalista
  16

• BLDC FOC controller

  #74 opened 4 years ago by happytm
  2

• modification of code to use Sparkfun monster shield

  #71 opened 4 years ago by niranjan1997
  2

• Step multiplier

  #70 opened 4 years ago by just-jason
  5

• Drift

  #68 opened 5 years ago by TheGermanIng
  19

• Code Modification

  #69 opened 5 years ago by TheGermanIng
  4

• ESP8266 NODEmcu V2 connection issue

  #67 opened 5 years ago by ravx4
  8

• Can I use this for a reversible AC motor?

  #66 opened 5 years ago by kjjordans
  3

• Motion profile on a UNO

  #65 opened 5 years ago by star210
  1

• STM32 with hardware encoders

  #64 opened 5 years ago by paukstelis
  1

• PID tunnig tool not read the serial port

  #63 opened 5 years ago by SirGioVan
  4

• Question: Servo logic vs H-Bridge?

  #62 opened 5 years ago by cbpdk
  2

• Question: Is it possible to run 4 slow motors with 4 encoders on one DUE?

  #61 opened 6 years ago by Fireflaker
  2

• PINF question (error)

  #60 opened 6 years ago by caslor
  2

• Encoder precision, poor in atmega328

  #59 opened 6 years ago by DrStein99
  2

• Ad Stepper support

  #29 opened 7 years ago by Wintertod
  7

• Amother DC motor Software/Hardware -SAMI

  #58 opened 6 years ago by happytm
  1

• Using lpd3806-600bm

  #56 opened 6 years ago by PaulRobert1
  11

• Backlash correction?

  #57 opened 6 years ago by paukstelis
  5

• Pro Micro pin reassignment?

  #54 opened 6 years ago by paukstelis
  7

• PId Tuning tool not displayng graph correctly

  #53 opened 6 years ago by PaulRobert1
  20

• PIDtuningTool Graph Error

  #55 opened 6 years ago by aharshac
  1

• atmega8 support..

  #45 opened 6 years ago by silverSY
  9

• nodemcu motordriver shield

  #51 opened 6 years ago by PierreAuge
  8

• Grbl on ESP32

  #50 opened 6 years ago by happytm
  1

• setting of P, I, D?

  #49 opened 6 years ago by dnshvra
  1

• how can use STK681-050

  #48 opened 6 years ago by dnshvra
  6

• Marlin I2C?

  #43 opened 6 years ago by paukstelis
  9

• Use with Cytron 13A Driver

  #47 opened 6 years ago by movik1985
  2

• Resolution question

  #46 opened 7 years ago by warbunnies
  2

• Hi I want to build this project below :

  #44 opened 7 years ago by happytm
  2

• Adding a hard endstop detection

  #31 opened 7 years ago by pppalain
  18

• How to upload the PID Tuning tool

  #42 opened 7 years ago by ddgftw
  16

• Do i still need a stepper driver?

  #40 opened 7 years ago by pbbob
  28

• problem with my project.

  #39 opened 7 years ago by suradeer1688
  4

• Bad implementation of PWM overheating motor

  #38 opened 7 years ago by pppalain
  2