mkjanke

mkjanke's Stars

• thelastoutpostworkshop/gpio_viewer

  GPIOViewer Arduino Library to see live GPIO Pins on ESP32 boards

  Language:C++1.1k35133110

• collin80/SavvyCAN

  QT based cross platform canbus tool

  Language:C++1.1k91419293

• shmuelzon/esp32-ble2mqtt

  A BLE to MQTT bridge running on an ESP32

  Language:C69342162107

• NorthernMan54/rtl_433_ESP

  Trial port of the rtl_433 Library for use with OpenMQTTGateway on a ESP32 and a CC1101 Transceiver

  Language:C54231128131

• LennartHennigs/ESPTelnet

  ESP library that allows you to setup a telnet server for debugging.

  Language:C++222104835

• wcbonner/GoveeBTTempLogger

  Govee H5072, H5074, H5075, H5100, H5101, H5104, H5105, H5174, H5177, H5179, H5181, H5182, and H5183 Bluetooth Low Energy Temperature and Humidity Logger

  Language:C++183176726

• freakent/dbus-mqtt-devices

  A driver for Victron VenusOS GX devices to support use of dbus-mqtt/flashmq-mqtt

  Language:Python123129324

• DavidAntliff/esp32-ds18b20

  ESP32-compatible C library for Maxim Integrated DS18B20 Programmable Resolution 1-Wire Digital Thermometer.

  Language:C1015932

• mc0110/inetbox2mqtt

  communicate over mqtt protocol to simulate a truma inetbox

  Language:Python87137620

• espressif/esp-idf-cxx

  C++ wrapper classes for ESP-IDF components.

  Language:C++81131015

• danielfett/inetbox.py

  A software implementation of something similar to a Truma iNet box

  Language:Python7613389

• muccc/WomoLIN

  Open Source Steuerung von LIN Bus Geräten im Caravan Bereich.

  Language:HTML7457612

• rubillos/RV-Bridge

  Homekit to RV-C bridge - Allows control of RV lights, fans, and thermostats via HomeKit.

  Language:C++7410811

• mr-manuel/venus-os_dbus-serialbattery

  Battery Monitor driver for serial battery in VenusOS GX systems

  Language:Python6883723

• handmade0octopus/ESP32-TWAI-CAN

  ESP32 driver for TWAI / CAN for adruino

  Language:C++604816

• ChuckMash/ESPythoNOW

  A python library for sending, receiving, and monitoring ESP-NOW messages

  Language:Python51777

• Fabian-Schmidt/esphome-truma_inetbox

  ESPHome component to remote control Truma CP Plus Heater

  Language:C++44164111

• linuxkidd/coachproxy-os

  Open Source version of CoachProxy software

  Language:Perl38172219

• victronenergy/dbus-flashmq

  Plugin for FlashMQ that interfaces between DBUS and MQTT.

  Language:C++35744

• pvtex/Victron_BlueSmart_IP22

  Victron BlueSmart IP22 Charger ve.direct interface

  Language:Python24202

• linuxkidd/rvc-monitor-py

  RV-C Monitor - Python Edition

  Language:Python18749

• picnicprojects/gedcom2html

  Convert gedcom to html with bootstrap, d3 and jquery using python

  Language:Python15435

• spbrogan/rvc2mqtt

  Python application to bridge RVC devices to MQTT

  Language:Python147403

• sebdehne/dbus-mqtt-services

  Create services on the dbus using MQTT

  Language:Python9352

• PascalBod/ESPIDFRuuviTag

  ESP-IDF Ruuvi tag advertising data receiver

  Language:C7500

• j9brown/esphome-seelevel

  ESPHome component for reading the Garnet SeeLeveL tank sensor

  Language:C++5300

• robwolff3/seelevel2mqtt

  A utility to intercept, decode, and send SeeLeveL II tank sensor readings to a MQTT broker.

  Language:C++3210

• carpenike/rvc2hass

  Solution to take information off of an RV-C canbus network located on motorhomes and place it on a MQTT broker in a format that Home Assistant will automatically discover.

  Language:Perl2230

• eboston/NexClock-v2

  Language:C++1110

• elpinjo/C8YRuuviGateway

  Bluetooth gateway for Ruuvi tags that will send the measurements from the Ruuvi Tags to Cumulocity. The project connects to a thin-edge.io gateway to publish the data to Cumulocity. This project runs on an ESP32 microcontroller

  Language:C++1101