raul-ortega/u360gts

Issues

• Mag calibration never succeeds with pan reduction gear

  #126 opened 2 years ago by rueckwaertsflieger
  10

• ESPNOW ExpressLRS Backpack telemetry

  #131 opened 4 months ago by pki791
  1

• problema al conectar via wifi la antena al pc: Puerto serie abierto correctamente con ID: undefined

  #130 opened a year ago by Ciramir
  0

• Support Request for SPRACINGF3EVO

  #129 opened a year ago by NikitaPolar
  0

• bluepill DFU mode

  #128 opened a year ago by IcemanDZ
  3

• Bluepill: unknown device after flashing via demonstrator

  #127 opened a year ago by whoim2
  7

• Bluepill PCB and STEP files

  #124 opened 2 years ago by madhunm
  1

• Servo missing in setup with 2 tilt servos

  #125 opened 2 years ago by rueckwaertsflieger
  6

• Full config loss after power cycle / USB Disconnect

  #114 opened 4 years ago by b14ckyy
  2

• Magnetic declination West (negative value) causes incorrect heading calculation

  #123 opened 3 years ago by AlexC176
  0

• Tracker offset trim function (butttons) behave in the opposite direction to configurator pan offset

  #122 opened 3 years ago by AlexC176
  0

• max speed filter m/s setting, when exceeded causes tracking to stop until reboot

  #121 opened 3 years ago by AlexC176
  0

• HM10 Bluetooth to Taranis X lite BT Telemetry.

  #119 opened 3 years ago by rtjeras89
  2

• Digital FPV wiring and 180°servo

  #118 opened 3 years ago by shro70
  0

• Local GPS nor working

  #117 opened 3 years ago by romcoca
  1

• cc3d: usb connection over standard cc3d usb port

  #66 opened 3 years ago by Maarten112
  3

• STM32 - timed out, programming: FAILED

  #113 opened 4 years ago by MsnSazabi
  2

• New board support

  #116 opened 3 years ago by shro70
  0

• CC3D board pin mapping

  #73 opened 5 years ago by gstyle97
  4

• CC3C buzzer resource remapping

  #115 opened 3 years ago by WizzX-FPV
  0

• PWM not updated on display

  #61 opened 4 years ago by Fossdal
  1

• Feature Request: Please make "Telemetry Provider" configurable on OLED.

  #69 opened 5 years ago by skaman82
  1

• Spontaneous reboots (crossfire)

  #94 opened 4 years ago by skaman82
  5

• LTM issue

  #95 opened 5 years ago by skaman82
  1

• not all params saved to file

  #105 opened 4 years ago by RMFPV
  1

• CLI command for align mag doesn't stick

  #109 opened 4 years ago by AlexC176
  2

• Parameter pan_calibration_pulse >1500 not supported for inverted pan servos

  #107 opened 4 years ago by AlexC176
  2

• Program compiling software

  #103 opened 4 years ago by wsqzdz
  2

• Feature request - save last home position

  #88 opened 4 years ago by RMFPV
  1

• Alternative CRC check for R9 Telemetry via build-in BLE module is needed

  #91 opened 4 years ago by skaman82
  19

• Taranis X9D+ 2019 and R9M2019 ACCESS

  #80 opened 4 years ago by zosko
  9

• align mag command doesn't take effect

  #108 opened 4 years ago by AlexC176
  1

• Mag not recognized for Bn-880 gps

  #106 opened 4 years ago by AlexC176
  2

• S.Port mode: Is duplex needed?

  #84 opened 4 years ago by DIY420
  1

• Calibrating mag doesn’t work in v11

  #67 opened 4 years ago by edsellar
  1

• QMC5883 HMC5883L mag not working

  #74 opened 4 years ago by L4ky
  6

• Blank screen after changing telemetry provider

  #71 opened 5 years ago by skaman82
  3

• LTM Telemetry sends Tracker Batt Voltage instead craft Batt voltage

  #90 opened 5 years ago by b14ckyy
  1

• Feature Request: Allow Telemetry on UART2 on SPRacingF3 target

  #68 opened 5 years ago by skaman82
  10

• INAV 3D FC

  #89 opened 5 years ago by Cutbangrian
  1

• telemetry_altitude_priority - to work with relative ALT and local GPS

  #87 opened 5 years ago by RMFPV
  0

• DFU mode in blue pill

  #85 opened 5 years ago by Cutbangrian
  1

• REQUEST: Tracker Tilt Compensation

  #65 opened 5 years ago by b14ckyy
  0

• No Mavlink-out when LTM-in (Relay) SPRF3

  #60 opened 5 years ago by RMFPV
  6

• Tilt port not working

  #63 opened 5 years ago by sniperxnl
  0

• Servo's not behaving correctly

  #62 opened 5 years ago by nick9one1
  1

• No Mavlink-out when LTM-in

  #59 opened 5 years ago by RMFPV
  0

• No Mavlink-out when LTM-in

  #56 opened 5 years ago by RMFPV
  0

• No Mavlink-out when LTM-in

  #57 opened 5 years ago by RMFPV
  0

• No Mavlink-out when LTM-in

  #58 opened 5 years ago by RMFPV
  0