privileged isa spec. table 3 read-only csr's
farukyld opened this issue · 4 comments
farukyld commented
are those ones correct in the Table 3 in the document Volume 2, Privileged Specification version 20240411?
allenjbaum commented
Is there some reason you believe that the spec has a bug in that table?
…On Tue, May 21, 2024 at 11:32 PM farukyld ***@***.***> wrote:
are those ones correct in the Table 3 in the document Volume 2,
Privileged Specification version 20240411?
image.png (view on web)
<https://github.com/riscv/riscv-isa-manual/assets/120921965/c55c0140-5cd8-4eff-a1b3-cdcc2f053d39>
image.png (view on web)
<https://github.com/riscv/riscv-isa-manual/assets/120921965/8b695b96-7445-4874-9267-80f93a016208>
—
Reply to this email directly, view it on GitHub
<#1421>, or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AHPXVJRL23CCUJEEZRPG25DZDQ3W3AVCNFSM6AAAAABIC6MZ52VHI2DSMVQWIX3LMV43ASLTON2WKOZSGMYDSNRYHAZTGNY>
.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
farukyld commented
here:
in Table 6
in Table 7
farukyld commented
and also in the previous versions of privileged spec. (I have downloaded 20211203) those ranges were specified as read-only or custom read-only.
in this document: The RISC-V Instruction Set Manual Volume II: Privileged Architecture Document Version 20211203 in Table 2.1
aswaterman commented
This is a transcription error (cc @wmat). I'll fix it.