Rocket Propulsion Laboratory
The Rocket Propulsion Laboratory is a student organization at the University of California, San Diego founded in the Spring of 2017.
UC San Diego
Pinned Repositories
ariel-pump
Calculations for Centrifugal Pump Design
Base11-CommandBox
The code for RPL's command box
Base11-FC
Housing our code for Marginal Stability's flight computer running on a Raspberry Pi
Base11-GPS
C++, Verilog, and ASM for the Base 11 GPS.
C.A.M.E.R.O.N.-CAD
Guides
General body of knowledge for Rocket Propulsion Laboratory.
Launchy
Launchy McLaunchface, “Launchy,” is a currently under development by the Rocket Propulsion Laboratory. The launch vehicle is being designed for the FAR | Mars Society Launch Competition in the summer of 2018. Launchy uses the Ariel-1 rocket engine; a LOX/LNG engine achieving 2000 lbf thrust.
marginal-stability
Marginal Stability is a LOx/RP1 powered launch vehicle designed to reach the edge of space at 100 km above the surface!
Remove-Before-Flight
"Remove Before Flight" is a 2000 lbf Liquid Oxygen, Liquid Natural Gas engine currently being designed and developed by the Rocket Propulsion Laboratory. A1’s first static fire is planned for August of 2017.
Unscented-Orientation-Filter
A performance simulation of Crassidis and Markley's unscented quaternion estimator (USQUE) in MATLAB. This is an unscented Kalman filter that keeps track of the orientation of spacecraft. Based on: https://doi.org/10.2514/2.5102
Rocket Propulsion Laboratory's Repositories
rocketproplab/Guides
General body of knowledge for Rocket Propulsion Laboratory.
rocketproplab/Launchy
Launchy McLaunchface, “Launchy,” is a currently under development by the Rocket Propulsion Laboratory. The launch vehicle is being designed for the FAR | Mars Society Launch Competition in the summer of 2018. Launchy uses the Ariel-1 rocket engine; a LOX/LNG engine achieving 2000 lbf thrust.
rocketproplab/Base11-FC
Housing our code for Marginal Stability's flight computer running on a Raspberry Pi
rocketproplab/Base11-GPS
C++, Verilog, and ASM for the Base 11 GPS.
rocketproplab/axial_loading
airframe calculations; cylinders under axial loads
rocketproplab/Base11-CommandBox
The code for RPL's command box
rocketproplab/C.A.M.E.R.O.N.-CAD
rocketproplab/Marginal-Stability-CAD
rocketproplab/Base11_Motherboard_Altium_Project
Flight computer board (3x3)
rocketproplab/FC_firmware
Launchy Flight Computer Firmware
rocketproplab/flight
Rocket Flight Analysis
rocketproplab/RPL_Avionics
rocketproplab/STM32_CM_Altium_Project
rocketproplab/AvionicsGUI
rocketproplab/Base11-ECU
rocketproplab/C.A.M.E.R.O.N.-Software
rocketproplab/cameron_software
Software for cameron
rocketproplab/Injector-Design
Injector design repository for RPL rocket engines
rocketproplab/Power
rocketproplab/Read_Sensors
rocketproplab/Recovery
rocketproplab/SCMLib
A C++ implementation of the SCM protocol
rocketproplab/spi_test
rocketproplab/Stacks-DAQ
rocketproplab/LossyLineTool
A tool for calculating lossy transmission lines
rocketproplab/propulsion-education
Propulsion knowledge base.
rocketproplab/website
RPL's main website. (Currently under development)
rocketproplab/Base11_PDB_Altium_Project
rocketproplab/New-Member-Project
rocketproplab/WiringPi
Gordon's Arduino wiring-like WiringPi Library for the Raspberry Pi (Unofficial Mirror for WiringPi bindings)