scanse/sweep-sdk

Issues

• Hiring

  #135 opened 6 years ago by forlinchow
  0

• libsweep Windows build failing

  #121 opened 7 years ago by mncosta
  2

• Time Stamps

  #108 opened 7 years ago by MikeGitb
  8

• RUNTIMEERROR: READING FROM SERIAL DEVICE FAILED - Sweeppy

  #133 opened 7 years ago by ennemoser
  0

• [Feature Request] 1D Ranging/Data Streaming

  #94 opened 7 years ago by MikeGitb
  7

• Error handling in worker thread

  #91 opened 7 years ago by MikeGitb
  2

• Non-blocking reads

  #109 opened 7 years ago by MikeGitb
  2

• sweep-ctl et al. freezes up on first run, but works fine on second run

  #132 opened 7 years ago by mt-caret
  0

• Laggy values from Sweep with piCamera integration in Raspberry pi 3 b

  #122 opened 7 years ago by IamBiswajitSahoo
  6

• sweep-ctl: Error: invalid motor info response commands

  #130 opened 7 years ago by sachin0x18
  0

• Non real-time frames receiving

  #128 opened 7 years ago by tucher
  0

• I get the lidar data is intermittent

  #127 opened 7 years ago by persler06
  0

• Lock up when sweep_device_construct is called too soon after device connect

  #126 opened 7 years ago by FPtje
  0

• Support for FreeBSD

  #123 opened 7 years ago by hyunh90
  5

• Sweeppy hangs after returning 1~3 scan results

  #100 opened 7 years ago by kimauk
  6

• Invalid response checksum when attempting to adjust sample rate

  #120 opened 8 years ago by tyler124
  5

• sweeppy can't find C-libraries

  #96 opened 8 years ago by CodingJonas
  3

• Creating sweep object hangs

  #72 opened 8 years ago by damyvv
  15

• MacOS - cannot fetch event from a worker thread (OS X restriction)

  #114 opened 8 years ago by salman451
  1

• macOS - Package ´openal´, required by ´sfml-audio´ not found

  #112 opened 8 years ago by salman451
  3

• Mac: fatal error: ´zmq.hpp´ file not found

  #113 opened 8 years ago by salman451
  2

• sweep red light, no data

  #111 opened 8 years ago by brusangel
  2

• RuntimeError: baud rate could not be determined

  #104 opened 8 years ago by calebmadrigal
  4

• libsweep does not handle unexpected unplug gracefully

  #102 opened 8 years ago by sevenbitbyte
  1

• Sweeppy setup.py missing PATCH version

  #99 opened 8 years ago by dcyoung
  0

• Delay in serial buffering of DX response on RaspberryPi, corrupts subsequent responses

  #73 opened 8 years ago by dcyoung
  6

• getScan() hangs after resetting stationary device, regardless of new motor speed

  #95 opened 8 years ago by dcyoung
  1

• Sweep locking up using C SDK

  #85 opened 8 years ago by justin-p-m
  11

• Check Firmware Compatibility

  #77 opened 8 years ago by daniel-j-h
  7

• Sensor protocol description nitpicking

  #89 opened 8 years ago by MikeGitb
  1

• RuntimeError: unable to start scanning. could not verify motor speed.

  #88 opened 8 years ago by brusangel
  4

• Angle unit conversion

  #79 opened 8 years ago by brusangel
  7

• lingering device with sweepjs bindings

  #69 opened 8 years ago by dcyoung
  4

• Parse DX receipt in "sweep_device_stop_scanning", instead of sending DX command twice.

  #27 opened 8 years ago by dcyoung
  4

• Worker Thread Discussion

  #31 opened 8 years ago by dcyoung
  18

• Communicating Failure in Updated Protocol

  #68 opened 8 years ago by dcyoung
  10

• "Error: unable to receive stop scanning command response" in example.cc

  #35 opened 8 years ago by matpalm
  5

• sweep-ctl: interacting with the device from the command line

  #49 opened 8 years ago by daniel-j-h
  1

• Project structure

  #61 opened 8 years ago by MikeGitb
  8

• Add full semantic version scheme

  #26 opened 8 years ago by dcyoung
  2

• Check for !device.is_scanning before sending commands

  #56 opened 8 years ago by dcyoung
  10

• Avoid struct padding specific to certain compilers?

  #37 opened 8 years ago by dcyoung
  20

• Switch libsweep from Makefile to CMake

  #50 opened 8 years ago by daniel-j-h
  2

• Build and Distribute Binaries for npm

  #55 opened 8 years ago by daniel-j-h
  0

• Build and Distribute Python Wheel

  #54 opened 8 years ago by daniel-j-h
  0

• Build libsweep Examples on Travis

  #30 opened 8 years ago by daniel-j-h
  0

• Viewer example misrepresents distance of sensor readings > 5m away

  #40 opened 8 years ago by dcyoung
  0

• Examples Error on alternating runs without device reset

  #23 opened 8 years ago by dcyoung
  6

• Quickstart docs for the examples missing a command

  #24 opened 8 years ago by dcyoung
  1

• Reset command does not send response

  #22 opened 8 years ago by daniel-j-h
  0