sparkfun/SparkFun_LSM9DS1_Arduino_Library

Issues

• I2C Initialization fails

  #42 opened 2 months ago by starrobin34
  1

• Calibration example

  #40 opened 3 years ago by marcwitteveen
  1

• Interrupt configuration pushPull logic broken

  #34 opened 4 years ago by choller
  3

• Setting functionality does not work

  #38 opened 3 years ago by m4xb3
  1

• Calibration details?

  #17 opened 6 years ago by glucee
  4

• Error compiling (SPI issue) for nrf52 (nano 33 BLE)

  #39 opened 3 years ago by prisikarm
  1

• setting the imu settings.accel.scale fails

  #32 opened 4 years ago by aero530
  1

• Initialising IMU overwrites settings

  #27 opened 5 years ago by nuhash
  1

• Can I use this library on STEVAL-MKl1559V1 (based on LSM9DS1 chip)

  #33 opened 4 years ago by TIB28
  0

• Can I use this library with the nrf52 SDK?

  #30 opened 4 years ago by schosdas
  0

• IMU won't initialize

  #29 opened 5 years ago by JoaquinRomeroPrada
  0

• FIFO random issue

  #28 opened 5 years ago by u0078867
  0

• magnetometer measurement results increase temp?

  #26 opened 5 years ago by kessero
  1

• power consumption

  #24 opened 5 years ago by savan8192
  2

• Platformio download

  #12 opened 5 years ago by antonagestam
  2

• Initializing IMU breaks PWM on raspberry pi

  #22 opened 6 years ago by saspelund
  2

• FIFO mode enum bug

  #19 opened 6 years ago by sheitbri
  3

• Incorrect temperature sensor readouts

  #20 opened 6 years ago by Nufflee
  1

• Warnings in SparkFunLSM9DS1.cpp due to missing return statement

  #16 opened 6 years ago by Miautomat
  1

• Code simplification?

  #1 opened 6 years ago by KayakDiver
  1

• Temperature sensor read

  #13 opened 6 years ago by tchristle
  1

• LSM9DS1 code to measure temperature

  #18 opened 6 years ago by sauru123
  1

• new compile error

  #3 opened 7 years ago by balamsoto
  2

• Calibration details?

  #10 opened 8 years ago by matiasgarcia91
  1

• Incorrect I2C address for magnetometer

  #14 opened 7 years ago by kyle-kelly
  1

• I2CreadBytes should return an unsigned int

  #2 opened 8 years ago by sensestage
  1

• No need to wait for data after Wire.requestFrom()

  #6 opened 8 years ago by Koepel
  1

• printAttitude mixes degrees and radians incorrectly

  #8 opened 8 years ago by scrain777
  1

• accelerometer dynamic range

  #9 opened 8 years ago by JVHooligan
  1