sparkfun/SparkFun_MPU-9250-DMP_Arduino_Library

Issues

• linear acceleration values

  #54 opened a year ago by nervusvagus
  0

• Mystical oddities with the MPU9250 and the library

  #53 opened a year ago by brightproject
  0

• Starkfan

  #52 opened 2 years ago by jaderaejackson
  0

• Reboot in SparkFunMPU9250-DMP.cpp at line 46

  #48 opened 2 years ago by froussel
  2

• MPU on raspberry pi 4

  #51 opened 2 years ago by zoldaten
  0

• [Arduino IDE] Error Compiling for Raspberry Pi Pico

  #50 opened 2 years ago by AtharvaBhorpe
  0

• Change I2C address

  #49 opened 3 years ago by Shogun5
  0

• When loading the sparkfun_mpu-9250-dmp_arduino_library library with platformio, the min function was not found

  #41 opened 5 years ago by woody5418
  1

• dmpSetAccelBias is undefined

  #47 opened 3 years ago by zjor
  0

• INF ouput when reading Quaternions

  #45 opened 4 years ago by nsk126
  0

• Mag Calibration Missing

  #44 opened 4 years ago by JoergSH
  0

• Use 2 IMU with 1 arduino

  #42 opened 4 years ago by Bug38
  1

• Arduino Micro Tap Detection and Wake On Motion (I2C)

  #43 opened 4 years ago by ltwin8
  0

• How to change axis in DMP?

  #33 opened 5 years ago by Sketh
  5

• ~60 MS DELAY EVERY ~.5S

  #36 opened 5 years ago by skemp117
  2

• Unable to get raw accelerometer data after calculating quaternion

  #39 opened 5 years ago by lannerxiii
  5

• MPU9250 I2C Address

  #20 opened 6 years ago by hendrikjvr
  2

• Bug in setLowPass Filter Function - Accel lowpass is never configured

  #40 opened 5 years ago by savejeff
  4

• Problem with magnetometer

  #10 opened 7 years ago by Jef35
  4

• Unable to Read Compass in FiFO mode due to bug

  #38 opened 5 years ago by savejeff
  0

• Max sampling rate for DMP

  #37 opened 5 years ago by yo90bosses
  1

• endless loop with vibration

  #32 opened 5 years ago by marcoarnold99
  2

• How to get absolute yaw with DMP

  #29 opened 6 years ago by Sketh
  1

• Bricked 3 mkr zero boards with this card - advice please!! :(

  #30 opened 6 years ago by jon2000
  2

• Quaternion DMP calulation not working on Mega 2560

  #22 opened 6 years ago by raomin
  9

• Calibrate gyro and accel offsets?

  #28 opened 6 years ago by deezums
  0

• Using DMP and Wake on Motion

  #24 opened 6 years ago by method-nick
  1

• Using two MPU9250s at the same time

  #26 opened 6 years ago by Daniel-t
  1

• Arduino: SerialUSB not declared in scope

  #9 opened 6 years ago by jonathanrjpereira
  17

• Strange reset behaviour

  #16 opened 6 years ago by Yury-MonZon
  1

• SPI support?

  #17 opened 6 years ago by masha256
  1

• Esp32 Serial1 not working with this Library

  #25 opened 6 years ago by yo90bosses
  1

• Help with supporting other platforms

  #7 opened 6 years ago by sfranzyshen
  3

• Timing

  #19 opened 6 years ago by DomFo
  1

• Doesn't work on Arduino Uno

  #11 opened 6 years ago by april4s008
  8

• Custom Sercom Ports

  #18 opened 6 years ago by dminskiy
  3

• Which coordinate system does the DMP quaternion for the MPU-9250 initalise in?

  #14 opened 7 years ago by andymichael09
  1

• Mpu9250 does not work with ESP32 1.0.0 release (latest)

  #23 opened 6 years ago by MiloMindbender
  4

• Magnetormeter Data seems not right

  #21 opened 6 years ago by SHikumo
  1

• qToFloat mask uninitialized

  #2 opened 6 years ago by vcortex91
  1

• Heading isn't working

  #6 opened 6 years ago by csmith105
  6

• Unsufficient I2C baud-rate

  #12 opened 7 years ago by hbob
  1

• Quaternions are out of range -1 to 1

  #15 opened 7 years ago by Jaarson
  0

• you could delete it

  #13 opened 7 years ago by aster94
  0

• Euler calculation improvements

  #5 opened 8 years ago by dahlsrud
  4

• dmp_set_fifo_rate() dependent on SMPLRT_DIV

  #4 opened 8 years ago by vcortex91
  0

• qToFloat mask bits default to short

  #3 opened 8 years ago by vcortex91
  0

• No Wire.endTransmission() needed after Wire.requestFrom()

  #1 opened 8 years ago by Koepel
  1