Building wheel for diff-gaussian-rasterization (setup.py) ... error
czeyveli1 opened this issue · 4 comments
czeyveli1 commented
Hello dear friends,
When I try to install requirements.txt using pip install -r requirements.txt command, I get an error like;
Building wheels for collected packages: diff-gaussian-rasterization
Building wheel for diff-gaussian-rasterization (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py bdist_wheel did not run successfully.
│ exit code: 1
╰─> [60 lines of output]
running bdist_wheel
/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/torch/utils/cpp_extension.py:411: UserWarning: Attempted to use ninja as the BuildExtension backend but we could not find ninja.. Falling back to using the slow distutils backend.
warnings.warn(msg.format('we could not find ninja.'))
running build
running build_py
creating build
creating build/lib.linux-x86_64-cpython-310
creating build/lib.linux-x86_64-cpython-310/diff_gaussian_rasterization
copying diff_gaussian_rasterization/__init__.py -> build/lib.linux-x86_64-cpython-310/diff_gaussian_rasterization
running build_ext
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "/tmp/pip-req-build-zunyy40x/setup.py", line 17, in <module>
setup(
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/setuptools/__init__.py", line 103, in setup
return distutils.core.setup(**attrs)
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/setuptools/_distutils/core.py", line 185, in setup
return run_commands(dist)
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/setuptools/_distutils/core.py", line 201, in run_commands
dist.run_commands()
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/setuptools/_distutils/dist.py", line 969, in run_commands
self.run_command(cmd)
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/setuptools/dist.py", line 989, in run_command
super().run_command(command)
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/setuptools/_distutils/dist.py", line 988, in run_command
cmd_obj.run()
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/wheel/bdist_wheel.py", line 364, in run
self.run_command("build")
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/setuptools/_distutils/cmd.py", line 318, in run_command
self.distribution.run_command(command)
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/setuptools/dist.py", line 989, in run_command
super().run_command(command)
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/setuptools/_distutils/dist.py", line 988, in run_command
cmd_obj.run()
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/setuptools/_distutils/command/build.py", line 131, in run
self.run_command(cmd_name)
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/setuptools/_distutils/cmd.py", line 318, in run_command
self.distribution.run_command(command)
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/setuptools/dist.py", line 989, in run_command
super().run_command(command)
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/setuptools/_distutils/dist.py", line 988, in run_command
cmd_obj.run()
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/setuptools/command/build_ext.py", line 88, in run
_build_ext.run(self)
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/setuptools/_distutils/command/build_ext.py", line 345, in run
self.build_extensions()
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/torch/utils/cpp_extension.py", line 420, in build_extensions
compiler_name, compiler_version = self._check_abi()
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/torch/utils/cpp_extension.py", line 791, in _check_abi
_, version = get_compiler_abi_compatibility_and_version(compiler)
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/torch/utils/cpp_extension.py", line 324, in get_compiler_abi_compatibility_and_version
if not check_compiler_ok_for_platform(compiler):
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/site-packages/torch/utils/cpp_extension.py", line 280, in check_compiler_ok_for_platform
which = subprocess.check_output(['which', compiler], stderr=subprocess.STDOUT)
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/subprocess.py", line 420, in check_output
return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/subprocess.py", line 524, in run
raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '['which', 'g++']' returned non-zero exit status 1.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for diff-gaussian-rasterization
Running setup.py clean for diff-gaussian-rasterization
Failed to build diff-gaussian-rasterization
ERROR: Could not build wheels for diff-gaussian-rasterization, which is required to install pyproject.toml-based projects
And also I cannot execute anything because of gaussian-rasterization. (My system is Ubuntu 20.04 and my conda version is 24.1.2)
LinijaVP commented
I solved the problem by using pip install instead of conda install for the torch packages.
czeyveli1 commented
Same error.. When I cloned the splatam file, I noticed that the diff-gaussian-rasterization file was empty. Did this happen to you too?
czeyveli1 commented
Okey, I tried to clone diff-gaussian-rasterization-w-depth.git file manually and put it inside the SplaTAM folder manually, and also I tried to install "setup.py" file using python setup.py install and get an error as;
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/subprocess.py", line 421, in check_output
return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
File "/home/cz/anaconda3/envs/splatam/lib/python3.10/subprocess.py", line 526, in run
raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '['which', 'g++']' returned non-zero exit status 1.
I do not now is there any other way to solve the problem?