tonton81/FlexCAN_T4

Issues

• FlexCAN_T4 library not Sending ACK

  #79 opened 4 months ago by sdevetis
  3

• Unable to debug when using FlexCAN_T4 on platformIO

  #68 opened a year ago by Moi78
  1

• Message sending error. Interrupt or txbuffer error?

  #78 opened 6 months ago by megax
  2

• CAN bus communication with a smart actuator and Teensy 4.1 (FlexCAN_T4 Library) & MCP2551 module

  #77 opened 6 months ago by PramVidu
  0

• can2.setClock() resets baud rate of can1

  #76 opened 8 months ago by piranha771
  0

• ID issue with <FlexCAN_T4.h>

  #75 opened 9 months ago by Cand0o
  2

• Compatibility <FlexCAN_T4.h> and <NativeEthernet.h>

  #72 opened a year ago by Cand0o0
  1

• Extended Frame Identifier NOT send correct ID

  #74 opened 10 months ago by RicNewy
  0

• Delay in writing messages

  #73 opened 10 months ago by tekflio
  1

• Some frames not transmitted upon write() - race condition between mailbox write and bus state?

  #55 opened 2 years ago by Laogeodritt
  13

• When using a pointer to a FlexCAN_T4 instance it crashes the board

  #70 opened a year ago by MoveElectricMobility
  0

• calling write(MB,msg) from a function pointer function creates issue

  #67 opened a year ago by equinox311
  8

• Normal CAN frames receive via interrupts not working

  #69 opened a year ago by MohamedRizwan03
  2

• Crashing when isotp.h is included in multiple project files

  #27 opened 2 years ago by fredmcc
  9

• Trying to understand how the bit timing config works

  #66 opened 2 years ago by danielfu11
  2

• Filtering make messages disapear

  #65 opened 2 years ago by Concombre74
  2

• Reset does not reset FIFO

  #64 opened 2 years ago by geffennir
  3

• set up again CAN when communication is down

  #52 opened 2 years ago by rgianluca00
  2

• Undefined function is not pure virtual, causing undefined vtable linker error

  #51 opened 2 years ago by DeanIsMe
  1

• Interrupt race condition on RX buffer

  #45 opened 2 years ago by AzwarPrihastomo
  3

• CAN maximum baudrate

  #23 opened 2 years ago by jimmie11
  5

• Can.write(msg) repeats sending same frame forever

  #49 opened 2 years ago by Knio
  4

• No keyword file

  #46 opened 2 years ago by Arvind-Srinivasan
  1

• Grab an specific byte From specific ID

  #41 opened 2 years ago by djgabriel2004
  9

• Flexcan_t4 write(msg) doesn't work

  #53 opened 2 years ago by tmdwhsh
  7

• Issue with mailbox interrupts

  #58 opened 2 years ago by samprt-heracles
  7

• Different sample rate for arbitration and data phase

  #61 opened 2 years ago by trollkno1l
  4

• EXT ID only using 18 LSB of full 29 bit CAN ID

  #60 opened 2 years ago by NicRichardson
  3

• writeIFLAGBit() is clearing ALL bits, not just one

  #62 opened 2 years ago by bsundahl1
  5

• ISO-TP with CANFD

  #63 opened 2 years ago by trollkno1l
  1

• Allow isotp implementation per mailbox

  #59 opened 2 years ago by david-res
  2

• CAN-FD Interrupts

  #56 opened 2 years ago by flybrianfly
  12

• Extended CAN message not received

  #54 opened 2 years ago by Labolivier49
  7

• FlexCan for Teensy 4.1

  #22 opened 4 years ago by ldevillez
  24

• About loop back(transmit and receive)

  #50 opened 2 years ago by kay01-kwon
  5

• Calling write at 2Hz but it's sending messages at 3000Hz

  #48 opened 3 years ago by jflorchi
  2

• ISOTP conflicts when multiple CAN busses are enabled

  #34 opened 3 years ago by fredmcc
  15

• isotp losing frames when multiple id's being received at once

  #42 opened 3 years ago by fredmcc
  4

• void FlexCAN_T4<_bus, _rxSize, _txSize>::setMBFilterProcessing(FLEXCAN_MAILBOX, uint32_t, uint32_t) [with CAN_DEV_TABLE _bus = (CAN_DEV_TABLE)1075642368u; FLEXCAN_RXQUEUE_TABLE _rxSize = (FLEXCAN_RXQUEUE_TABLE)256u; FLEXCAN_TXQUEUE_TABLE _txSize = (FLEXCAN_TXQUEUE_TABLE)16u; FLEXCAN_MAILBOX = FLEXCAN_MAILBOX; uint32_t = long unsigned int]' is private

  #33 opened 3 years ago by Manivannan-maker
  5

• mailbox_filtering_example_with_interrupts giving multiple compiler errors.

  #36 opened 3 years ago by mjs513
  3

• undefined reference to vtable for FlexCAN_T4_Base

  #32 opened 3 years ago by corndog2000
  1

• CANx to Pin table

  #20 opened 3 years ago by rcrowder
  2

• flowcontrol frame

  #25 opened 3 years ago by niladridmgit
  1

• CAN Errors reset

  #28 opened 3 years ago by SimonFilgis
  3

• CANFD data length not OK if longer then 8 Byte

  #29 opened 3 years ago by GitSchorschGit
  3

• ISOTP single frame protocol is not implemented for messages less than 8 bytes

  #30 opened 3 years ago by fredmcc
  0

• Feature request, expose ESR and ECR register to diagnose software or hardware issues

  #24 opened 3 years ago by designer2k2
  14

• Overun error doubt

  #18 opened 3 years ago by antodom
  2

• Importing error

  #21 opened 4 years ago by Chase-Arline
  2

• problem reading msg identifier

  #19 opened 4 years ago by leonardoBolzonella
  4