Issues
- 2
Can not build Ardupilot-solo.
#290 opened by fenyi2016 - 3
how to build ardupilot-solo
#300 opened by Tenacity-soar - 7
Smart battery
#295 opened by Frederic88 - 6
Rebase on latest arducopter 3.5+?
#297 opened by tribbloid - 0
please consider removing the useless "Arm:OK" message;
#296 opened by AndKe - 0
what code do i use for this
#294 opened by jeevarjun - 2
mRo GPS M8N
#293 opened by n01knows - 0
Understanding Follow Me
#292 opened by danmartinj - 0
How is Solo controller connected to drone?
#289 opened by MainReturnZero - 3
ardupilot-solo firmwares
#287 opened by AeroHawk - 2
Solo Version
#288 opened by porlock - 4
Unresponsive after setting SERIAL1_PROTOCOL to "0"
#215 opened by rmackay9 - 0
- 2
Not really a ardupilot-solo issue, controller I guess..
#284 opened by AndKe - 5
ardupilot-solo + PX4Firmware-solo not building
#210 opened by Joeyn1993 - 1
The HDOP pre-arm check for Solo is now hard coded, whereas it used to be a parameter
#143 opened by IanHudsonP13 - 1
"Mode not armable"
#151 opened by squilter - 2
Quaternion attitude controls
#80 opened by jschall - 1
add minimum climb & pause after climb on RTL
#126 opened by jschall - 0
- 3
Delete closed branches
#131 opened by OXINARF - 0
pre-arm check for uncalibrated gimbal accels
#135 opened by bugobliterator - 0
maintain different sequence number series for different components in MAVLink routing
#136 opened by bugobliterator - 2
- 4
- 3
lading with drift mode doesnt stop rotors.
#274 opened by brettdaman - 6
- 3
open up beta testing to end users
#185 opened by franknitty69 - 2
Get GPS data: Signal-to-noise ratio 3DR Solo
#217 opened by santiandres33 - 1
New Solo update seems to have 1.2.21
#216 opened by GPSFan - 3
- 2
Have land detection in GUIDED mode
#195 opened by djnugent - 1
- 2
- 0
- 0
fix C++11 initialization warnings on remote logging
#127 opened by jschall - 0
fix pixhawk crash on log list w/ remote logging
#128 opened by jschall - 1
- 1
Reinstate HDoP pre-flight check
#91 opened by priseborough - 0
- 1
Solo is "Open for development", but the JIRA instance is closed to the public.
#89 opened by MAVProxyUser - 0
- 0
- 0
test post please ignore
#2 opened by jschall