AngelLM/Thor

Issues

• Questions about rods specification

  #105 opened 3 months ago by nomorewzx
  1

• Cn

  #104 opened 8 months ago by xycg2
  1

• Parts inside Art56 casing hard to access

  #51 opened 8 years ago by b-adkins
  2

• Endstop on PS1

  #101 opened a year ago by DanielYWoo
  1

• Can I use two Uno CNC shields instead of building the Thor-specific PCB?

  #100 opened a year ago by DanielYWoo
  2

• Website down

  #95 opened 3 years ago by MendyBerger
  2

• Servo Motor - PORTG0 (pin41) no PWM output

  #80 opened 3 years ago by celoke
  2

• Suggested Material for Printing

  #93 opened 3 years ago by sniperlucian
  1

• Confusion on PCB circuit

  #91 opened 3 years ago by DigeshC
  2

• Arduino Code to Control Stepper Motor

  #92 opened 3 years ago by hwu2023
  0

• Payloads

  #90 opened 3 years ago by x0rium
  3

• Notes/feedback about FreeCAD used within collaborative projects like Thor

  #89 opened 3 years ago by luzpaz
  2

• Inverse Kinematics implementation

  #30 opened 3 years ago by AngelLM
  13

• Looking for a Print Inventory List, and unit scaling on STLfiles.

  #72 opened 3 years ago by AlexanderPeters
  3

• Current software to use

  #74 opened 3 years ago by LoLo2207
  2

• Modificar Asgard

  #81 opened 3 years ago by lisergio
  1

• Art1 Body STEP file has faulty topology

  #85 opened 3 years ago by shonolon
  1

• 5mm (diameter) rods do not fit on 625ZZ bearings and similar issue with motor shaft and pulley

  #84 opened 3 years ago by emlachapelle
  1

• Fix broken URLs in README.md#repository-index section

  #88 opened 3 years ago by luzpaz
  1

• cinematic motion algorithm

  #64 opened 3 years ago by mkeyno
  16

• Document Improvement in STL files

  #82 opened 4 years ago by DanielYWoo
  0

• Servo not move... / El servo no se mueve

  #78 opened 5 years ago by lisergio
  2

• Duda en el montaje / Doubt in the assembly

  #77 opened 5 years ago by lisergio
  3

• Alimentación del servo de la articulación 6

  #76 opened 5 years ago by lisergio
  4

• ART2 BodyA that meshes with two gears always slipping. Bad fit?

  #67 opened 6 years ago by martinbarr
  4

• Stepper Motor Gearbox/Planet drive

  #73 opened 6 years ago by KenwoodFox
  1

• Some dimensions that may be wrong

  #68 opened 6 years ago by diegotrap
  3

• License confusion

  #70 opened 7 years ago by wilsoc5
  1

• Articulations bodies

  #69 opened 7 years ago by LoLo2207
  2

• Feedback sensors

  #32 opened 7 years ago by AngelLM
  35

• Control PCB update

  #35 opened 7 years ago by AngelLM
  4

• Art 4 Transmission Column unnecessarily tight fit for bearing

  #52 opened 7 years ago by b-adkins
  1

• Art56 Small Gears do not fit all variations of GT2x40 pulleys

  #53 opened 7 years ago by b-adkins
  2

• Hello

  #63 opened 7 years ago by ArtoriastheAbyssWalker
  1

• Where does the logic lie?

  #46 opened 8 years ago by lizixroy
  6

• Readme: Printer Requirements

  #48 opened 8 years ago by saeugetier
  2

• bevel gears - how?

  #42 opened 8 years ago by i-make-robots
  1

• Cooper plate?

  #41 opened 8 years ago by i-make-robots
  3

• Tool pins connector slip off.

  #31 opened 8 years ago by AngelLM
  2

• Malfunction due to steppers overheat

  #29 opened 8 years ago by AngelLM
  5

• Smoothie

  #27 opened 8 years ago by arthurwolf
  3