Energinet-AIG/MTB

Issues

• Add test of protection settings

  #40 opened 3 months ago by CVLenerginet
  0

• Grid-impedance is set in the wrong format

  #127 opened 6 months ago by matbkri
  0

• Run testbench from external python environment instead of embedded

  #109 opened a year ago by matbkri
  0

• Plot largest and smallest reactive support current contribution from each category of PPMs

  #49 opened a year ago by matbkri
  0

• Plot reactive support current for fault simulations for selected PPMs

  #50 opened a year ago by matbkri
  1

• PowerFactory png plot export missing signals

  #59 opened a year ago by CVLenerginet
  1

• Add support for testing of systemguard

  #52 opened a year ago by matbkri
  1

• Implement user friendly way of running single cases

  #73 opened a year ago by matbkri
  1

• Add .ini file for some project settings

  #69 opened a year ago by matbkri
  2

• Selectable fault location

  #75 opened a year ago by matbkri
  1

• Selectable measurement points for V, P, Q, Id and Iq

  #76 opened a year ago by matbkri
  1

• Add support for Operation Scenarios

  #80 opened a year ago by matbkri
  0

• Make overview at end of sim of encountered warnings

  #81 opened a year ago by matbkri
  0

• Add default Q setting mode to casesheet

  #83 opened a year ago by matbkri
  1

• Implement Qdsl controller instead of Power-Frequency Controller

  #86 opened a year ago by CVLenerginet
  1

• Initial POC voltage should be settable

  #96 opened a year ago by matbkri
  1

• Default case that plays a recorded voltage during fault and recovery to the plantmodel

  #97 opened a year ago by matbkri
  1

• Support multiple faults with different starting times, type, duration and depth

  #102 opened a year ago by matbkri
  1

• Add support for demand plants

  #104 opened a year ago by matbkri
  1

• Add support for station controller that distributes Q demand in other ways than by rated power

  #119 opened a year ago by matbkri
  1

• Add negative sequence PLL to PSCAD

  #120 opened a year ago by matbkri
  1

• Reenable PLL plotting

  #121 opened a year ago by matbkri
  1

• Removal of PP-MTB warnings in PSCAD model

  #123 opened a year ago by Jacob-Bak-Mortensen
  1

• Update wiki for 1.0 release

  #103 opened 2 years ago by matbkri
  0

• Create example projects

  #111 opened 2 years ago by matbkri
  0

• Also create new version at end of simulation runs

  #108 opened 2 years ago by matbkri
  0

• Bug in setting grid impedance

  #113 opened 2 years ago by CVLenerginet
  0

• Minor bug in script "PP-MTB Execute_Energinet_V1.8"

  #112 opened 2 years ago by bakhtyar0
  1

• Add disable of FSM functionality for "17_3441_MaxRoCoF" case

  #105 opened 2 years ago by Jacob-Bak-Mortensen
  1

• Plot largest and smallest reactive support current contribution from each category of PPMs in Powerfactory

  #34 opened 2 years ago by matbkri
  0

• Plot reactive support current for fault simulations for selected PPMs in Powerfactory

  #35 opened 2 years ago by matbkri
  0

• Add support for testing of systemguard in Powerfactory

  #51 opened 2 years ago by matbkri
  0

• Setable zero-sequence impedance of external grid in PSCAD

  #47 opened 2 years ago by matbkri
  0

• Remove "backstop" C points

  #79 opened 2 years ago by matbkri
  1

• Loading C-events from sheet stuck in infinite loop

  #90 opened 2 years ago by matbkri
  0

• Add separate included columns for RMS and EMT

  #95 opened 2 years ago by matbkri
  1

• Add max SCR and low SCR settings in casesheet

  #70 opened 2 years ago by matbkri
  1

• Parallel Computation

  #100 opened 2 years ago by CVLenerginet
  0

• Activate FSM in relevant cases in PSCAD

  #46 opened 2 years ago by matbkri
  0

• Update README dependencies

  #53 opened 2 years ago by CVLenerginet
  0

• Refactor execute.py

  #61 opened 2 years ago by matbkri
  0

• Implement alternative to variation consolidation

  #60 opened 2 years ago by matbkri
  2

• Phase B is plotted twice for PSCAD

  #93 opened 2 years ago by CVLenerginet
  0

• Add support for CPython 3.10 and 3.11 in PSCAD

  #48 opened 2 years ago by matbkri
  0

• Add supported PF, PSCAD and python combos to readme and documentation

  #57 opened 2 years ago by matbkri
  1

• Empty signalnames (PspSignal, QspSignal, QUspSignal, QPFspSignal) causes crash

  #62 opened 2 years ago by matbkri
  1

• Add support for max SCR and low SCR settings in powerfactory

  #71 opened 2 years ago by matbkri
  0

• Remove energinet only information from casesheet

  #41 opened 2 years ago by matbkri
  0

• Initialization PI controller does not freeze after three seconds

  #63 opened 2 years ago by CVLenerginet
  0

• Export to html and jpeg is mistakenly done after each project has been added to a plot

  #37 opened 2 years ago by matbkri
  0