GliaX/Stethoscope

Issues

• Printing in smaller printing Beds

  #63 opened 3 years ago by arisberd
  3

• [Suggestion]: Add releases using the "releases" GitHub feature

  #62 opened 4 years ago by darigovresearch
  0

• eartube.scad warning message

  #60 opened 4 years ago by gaetgodi
  0

• Rendering of Stethoscope_Validation.md

  #58 opened 4 years ago by darigovresearch
  1

• Describe the properties needed for the diaphragm

  #51 opened 6 years ago by mrjohnc
  4

• Another way to cut diaphragms

  #56 opened 4 years ago by johnsonm
  0

• What do you think of expanding the membrane drum to 50mm ?

  #55 opened 5 years ago by sandrobilbeisi
  0

• Y-Part does not fit

  #53 opened 5 years ago by sbamueller
  8

• ear plugs

  #54 opened 5 years ago by sbamueller
  4

• Spring is too tight when printed in PLA

  #45 opened 5 years ago by tareko
  6

• Make instructions on assembling the head with diaphragm clearer

  #50 opened 6 years ago by mrjohnc
  1

• Distinction needed between 3D printed parts and 2D inserts

  #49 opened 6 years ago by mrjohnc
  2

• Some users cannot hear due to shape of ear tube

  #44 opened 7 years ago by tareko
  0

• License

  #43 opened 7 years ago by massa
  1

• Ear tube & Y-piece outer diameter?

  #41 opened 7 years ago by abitofalchemy
  1

• Decide on a license

  #42 opened 7 years ago by pinobatch
  1

• Field Test

  #39 opened 8 years ago by rhiannas21
  17

• Source for stethoscope membrane in Europe?

  #37 opened 8 years ago by BoxTrot
  6

• Dimensions and drawings for non scad users?

  #38 opened 8 years ago by jamesi8086
  2

• Alternative material to Acrylonitrile butadiene styrene plastic?

  #36 opened 8 years ago by abitofalchemy
  10

• eartube file

  #35 opened 8 years ago by j0en0
  14

• Earplug mold should have direction marks

  #25 opened 8 years ago by jglauche
  4

• Size of Diaphragm

  #33 opened 8 years ago
  1

• CAEP presentation

  #11 opened 8 years ago by tareko
  3

• Manuscript

  #12 opened 8 years ago by tareko
  1

• SAEM presentation

  #13 opened 8 years ago by tareko
  1

• Headpiece design

  #16 opened 8 years ago by tareko
  1

• Size of rubber/silicone ring for diaphragm?

  #28 opened 8 years ago by rickybloomfield
  12

• Enhancement request - bill of materials documentation

  #26 opened 9 years ago by MarkRijckenberg
  6

• Precision loss in CrystalScad math causes "step" in earpiece

  #24 opened 10 years ago by jglauche
  2

• Run statistical analysis

  #9 opened 10 years ago by tareko
  0

• Verify that analysis was done correctly

  #10 opened 10 years ago by tareko
  0

• Meet with Cindy Langford at PEDs ER

  #15 opened 10 years ago by amymiller
  1

• Research and Ethics board approval

  #22 opened 10 years ago by tareko
  1

• Recruit participants

  #21 opened 10 years ago by tareko
  0

• Study design

  #20 opened 10 years ago by tareko
  2

• Objective bench validation by independent test lab

  #19 opened 10 years ago by tareko
  1

• Stethoscope head design

  #3 opened 10 years ago by tareko
  4

• Tube design

  #17 opened 10 years ago by tareko
  4

• Move general testing files out of dated testing folder

  #23 opened 10 years ago by tareko
  1

• Resident research day presentation

  #14 opened 10 years ago by tareko
  1

• Equipment list for device testing

  #7 opened 10 years ago by tareko
  1

• Device testing protocol

  #6 opened 10 years ago by tareko
  1

• Objective bench validation done by us

  #18 opened 10 years ago by tareko
  0

• Test the device

  #5 opened 10 years ago by tareko
  1

• What statistical analysis is needed?

  #8 opened 10 years ago by tareko
  1

• Patent search

  #1 opened 10 years ago by tareko
  6

• How will the device be tested?

  #4 opened 10 years ago by tareko
  1

• Literature review

  #2 opened 10 years ago by tareko
  9