MTrab/landroid_cloud

Issues

• Start Cutting Edge does not work

  #662 opened 5 months ago by ascha191
  7

• Upgrade to 5.0.7 results in issue

  #712 opened 3 months ago by roofburner
  3

• STATE_LOCKED was used from landroid_cloud, this is a deprecated constant

  #702 opened 3 months ago by mbo18
  0

• Mower's time gets changed

  #686 opened 4 months ago by Snordraacher
  2

• CertificateError: hostname 'api.worxlandroid.com' doesn't match '*.eu-west-1.es.amazonaws.com'

  #691 opened 3 months ago by maxicasa
  2

• [LR]: Hungarian

  #705 opened 3 months ago by cinadr
  1

• just a question about blades entities

  #700 opened 3 months ago by gralfj
  2

• Landroid integration not installed

  #698 opened 3 months ago by TheuxDom
  1

• Integration not updating after a mower is turned back on again

  #695 opened 3 months ago by Krautmaster
  0

• Device is not updating after a while

  #615 opened 8 months ago by nbai777
  22

• Too many requests when trying to login to Kress account

  #659 opened 6 months ago by jellyneck84
  6

• [FR]: Go home - keep blades on

  #631 opened 7 months ago by tontsa74
  6

• [FR]: reenable torque setting

  #620 opened 7 months ago by Crashman1983
  16

• HACS 2.0.0 update broke my Landroid cloud

  #682 opened 4 months ago by IvanRaide
  1

• [FR]: Add option to Control Off Limits Module

  #679 opened 4 months ago by DerAutomatiker
  0

• [LR]: Spanish

  #675 opened 4 months ago by damianve
  1

• start mower after update not possible

  #657 opened 6 months ago by gravidigit
  2

• Adjusting Torque

  #672 opened 5 months ago by liveleeiow
  1

• [FR]: Possibility to enable disable schedule

  #633 opened 7 months ago by AdamWeglarz
  1

• Fully Kiosk Browser integration not displaying

  #666 opened 5 months ago by JohnnyCarcinogen
  1

• [FR]: Trigger Rain Delay via raw command

  #652 opened 6 months ago by Pelmo23
  1

• [FR]: Statistiche non disponibili

  #650 opened 6 months ago by ziopeppe94
  6

• Landroid Cloud entities not available

  #638 opened 6 months ago by ThorPrez
  4

• How to delete old Worx mower from the integration

  #636 opened 6 months ago by mibo-wb-gh
  4

• [FR]: Reset blade via raw command possible? Overview of commands

  #645 opened 6 months ago by Phoenix-DH
  4

• With two Worx Landroid accounts getting banned every day or two

  #635 opened 7 months ago by RaunoVV
  5

• Getting IP banned temporarily, although I have not reloaded for several hours

  #641 opened 7 months ago by mibo-wb-gh
  1

• [FR]: Manually trigger Rain delay

  #619 opened 7 months ago by myreczek
  2

• On zone change via select, I get following error "Cannot request this zone as it is not defined."

  #585 opened 7 months ago by fanningert
  7

• OTS needs minimal runtime

  #612 opened 7 months ago by bluediamond1984
  0

• KeyError: 'charging'

  #628 opened 7 months ago by Bouni
  0

• Home Assistant Constants needs translation

  #621 opened 7 months ago by Strixx76
  0

• INFO.md states the project is not maintained

  #618 opened 7 months ago by Strixx76
  1

• Sensor with the whole MQTT JSON

  #623 opened 7 months ago by johngianni
  2

• Robot showing error while switching between searching for home and mowing

  #617 opened 8 months ago by oveand
  4

• [FR]: number.robby_torque not accessible

  #613 opened 8 months ago by Bailey0721
  4

• Visualisation / logging of mower state

  #603 opened 8 months ago by davyvr
  7

• torque missing

  #611 opened 8 months ago by robberburn
  1

• Torque settings fails: manual reboot required

  #597 opened 8 months ago by matteocostantini
  3

• homeassistant.backports.enum

  #599 opened 8 months ago by Erwiiinst
  0

• [LR]: Add Estonian language

  #601 opened 8 months ago by northweed
  1

• Home Assistant deprecation warning StrEnum deprecated alias which will be removed in HA Core 2025.5

  #602 opened 8 months ago by cliviu74
  1

• cannot set up

  #596 opened 8 months ago by mihauu1983
  2

• Config flow could not be loaded: 500 Internal Server Error Server got itself in trouble

  #588 opened 8 months ago by effix1983
  13

• [FR]: Manually trigger rainsensor?

  #594 opened 8 months ago by pfefferle
  1

• Another uncaught thread exception - something new

  #592 opened 8 months ago by GSzabados
  5

• set Zone not working

  #590 opened 8 months ago by gost4711
  1

• Edgecut not working

  #584 opened 8 months ago by Riebandt
  10

• Typo in number.[mower]_time_extention entity_id

  #583 opened 8 months ago by Barma-lej
  2

• Error "unsupported operand type(s) for -: 'str' and 'int'" on zone selection

  #580 opened 8 months ago by fanningert
  0