Misfittech/nano_stepper

Issues

• ERROR 'Serial5' was not declared in this scope

  #48 opened 5 years ago by DanTheHero
  2

• setpos to negative number error

  #62 opened 2 years ago by brianmichalk1
  0

• AS5047 Error on Mechaduino

  #37 opened 5 years ago by hg42
  5

• www.misifittech.net dead link

  #61 opened 2 years ago by cdwijs
  0

• Open Source License

  #42 opened 5 years ago by gregsaun
  3

• Cannot Install misfitTech SAMD Boards in Arduino.

  #60 opened 3 years ago by AbidHussain70
  1

• Retrofit for Nema 14

  #59 opened 4 years ago by riodda
  1

• INFO: bigtreetech hw/fw design of 42B and 42A shared on github

  #52 opened 5 years ago by Quas7
  2

• Convert to TMC2208?

  #57 opened 4 years ago by Shaische
  3

• Inquiry: Step interpolation mode

  #58 opened 4 years ago by Anulap
  1

• Altium project includes library files which are not committed source

  #24 opened 6 years ago by zbrozek
  2

• advice,add compiled burn-write firmware hex

  #27 opened 5 years ago by hruijin
  1

• INFO: MKS provided now source for fw and hw

  #51 opened 5 years ago by Quas7
  4

• 2209 question

  #55 opened 5 years ago by froust-company
  2

• Duet Board Support

  #40 opened 5 years ago by vmario89
  7

• What magnets to use?

  #56 opened 5 years ago by vmario89
  2

• Just for info: easily read/write from/to Smart Stepper by raspberry pi/bash

  #54 opened 5 years ago by vmario89
  1

• MKS SERVO 42 ERROR PIN?

  #49 opened 5 years ago by DanTheHero
  2

• Current Homing

  #50 opened 5 years ago by DanTheHero
  1

• How to change vendor/product I or add iSerial

  #47 opened 5 years ago by vmario89
  2

• compile error 'Serial5' was not declared in this scope

  #31 opened 5 years ago by Hellfish78
  6

• Additions to docs

  #46 opened 5 years ago by vmario89
  1

• Smart Stepper N2P 100 35V capacitor getting really hot

  #45 opened 5 years ago by vmario89
  2

• Detailed C++ programming questions

  #23 opened 5 years ago by tobbelobb
  1

• Controler Mode CTRL_OPEN doesn't work with step\dir interface

  #28 opened 6 years ago by Fetzge
  2

• Schematic has upside-down text

  #25 opened 5 years ago by zbrozek
  2

• Makerbase upload sources.

  #44 opened 5 years ago by lonelymyp
  1

• the bug of move motor

  #19 opened 5 years ago by makerbase-motor
  2

• New Firmware 0.40 direction not work

  #41 opened 5 years ago by billydragon
  5

• Required Wiring Doc Update

  #43 opened 5 years ago by TheBrigandier
  1

• UsbSerial not available

  #11 opened 5 years ago by MS1987
  1

• Limit Detection

  #20 opened 5 years ago by adamfilip
  2

• Connecting to Smoothie

  #6 opened 5 years ago by pristinesource
  7

• Wiki Updates

  #17 opened 5 years ago by andrewismoody
  1

• please update

  #18 opened 5 years ago by nesquik011
  1

• Broken link

  #22 opened 5 years ago by adamfilip
  2

• #error "Step/Dir UART not supported on Mechaduino yet"

  #30 opened 5 years ago by kaloca
  3

• narrowing conversion error

  #33 opened 5 years ago by hg42
  4

• commands.cpp compile error.. missing reset.h

  #12 opened 5 years ago by rstager
  2

• Ramps 1.4 GRBL

  #29 opened 5 years ago by qiwalker
  3

• update to the readme?

  #39 opened 5 years ago by theholyduck
  3

• Enhancement: Support for TMC2130/TMC2XXX

  #10 opened 8 years ago by felixekman
  1

• get postion is error ,value is 23592960.00

  #9 opened 8 years ago by kidswong999
  1

• add rs485 & modbus

  #8 opened 8 years ago by kidswong999
  1

• ctrlmode command not working

  #5 opened 8 years ago by Fetzge
  5

• compile error: fet_driver.h: No such file or directory

  #4 opened 8 years ago by Fetzge
  2

• compilation with (for) MECHADUINO_HARDWARE is broken after hash 684f9ac4

  #2 opened 8 years ago by swk
  2