NVIDIA/jetson-gpio

Issues

• Jetson model not detected - Jetson Orin AGX 64GB Developer Kit

  #106 opened a year ago by pbrandstet
  4

• Carrier board support warning message

  #115 opened 2 months ago by shkipan
  2

• Jetapck 6 with libgpiod broken

  #110 opened 2 months ago by AlexKlimaj
  7

• jetson-gpio doesn't work on Jetpack 6.0 ???

  #114 opened 4 months ago by HappySamuel
  6

• how to access pins in gpiochip1 for orin nano

  #113 opened 3 months ago by arrow53
  2

• GPIO pins not responding on Jetson ORIN

  #74 opened 3 months ago by KTBM
  9

• GPIO load capacity is very weak

  #112 opened 5 months ago by mikedh-avia
  1

• Remove Python 2 requirement

  #111 opened 5 months ago by paulober
  4

• Unable to use pins 3, 5 as GPIO

  #109 opened 5 months ago by KopecekCVUT
  1

• Multi-Pin

  #108 opened 5 months ago by Satge96
  3

• Same permissions problem

  #82 opened a year ago by sumitbounthiyal
  7

• Jetson Nano Gpio interrupt lagging

  #86 opened a year ago by mohamed-keshk
  6

• Jetson Orin Nano PWM only works on Pin 33

  #105 opened a year ago by mattwilliamson
  17

• wait_for_edge doesn't timeout/respond on Orin Nano

  #103 opened a year ago by Romihi
  10

• how could i use gpio with c++?

  #102 opened a year ago by xuguosheng110
  1

• warn_if_not_carrier_board error check

  #99 opened a year ago by Wu-Fisher
  5

• GPIO on non-development carrier boards

  #98 opened a year ago by franzpeter124
  3

• Exception: tegra194-gpio: No such gpio device registered

  #100 opened a year ago by devdandi
  1

• Docker container can't be run as non-privileged with mapped dev volume

  #96 opened a year ago by Levaru
  1

• Python NameError: name 'open' is no defined. error.

  #95 opened a year ago by yijh0611
  4

• I want to know how to set BOARD pin 15 as mux function PWM(JETSON_NX) like described in test_all_apis.py

  #94 opened a year ago by 20040116
  0

• GPIO events are triggered on modbus writes

  #67 opened a year ago by yassiezar
  1

• check HIGH or LOW state of the GPIO header

  #92 opened a year ago by SJavad
  3

• Pin32 of Orin Nano still does't work as PWM after reinstall new GPIO @2.1.3

  #93 opened a year ago by ObamaIII
  17

• Problem with miniconda

  #80 opened a year ago by ferraridamiano
  2

• Jetson orin nano pin 32 "Channel 32 is not a PWM"

  #91 opened a year ago by ARK3r
  1

• We are moving to gpio character device implementation for version 2.1.0 so there should be a few bug. You should use version 2.0.21 for better stability.

  #81 opened a year ago by anhmiuhv
  0

• Hi Team, I am facing issue to access OpenGL for rs-capture. I am accessing Intelrealsense camera(remotely via SSH)where NVIDIA Jetson is used as graphic driver. I have updated the drivers still the issue: Could not open OpenGl please check graphic driver or use SDK textual tools. Will any one help me?

  #84 opened 2 years ago by drakshayanidesai
  1

• ValueError: Channel 214 is invalid

  #83 opened 2 years ago by AhmadSuper-coder
  1

• TypeError: Can Only Concatenate str

  #79 opened 2 years ago by Ecophagy
  6

• What does `curr_value ^= GPIO.HIGH` mean?

  #78 opened 2 years ago by tsadarsh
  2

• Problem with unofficial carrier board

  #75 opened 2 years ago by XinZhenRen
  2

• Mutex code broken on debounce

  #76 opened 2 years ago by masterhapero
  2

• Jetson.GPIO uses GPIO.cleanup but rpi.GPIO uses GPIO.clean_up

  #70 opened 3 years ago by seanmayorga
  2

• Documentation not clear

  #71 opened 3 years ago by ma-ludw
  1

• incorrect RAM size in JETSON_INFO

  #64 opened 3 years ago by pjueon
  1

• ChangeFrequency function returns OSError: [Errno 22] Invalid Argument

  #66 opened 3 years ago by JoshQuamen
  1

• GPIO on Jetson Xavier

  #61 opened 3 years ago by imihassan
  15

• possible typo?

  #68 opened 3 years ago by pjueon
  3

• I have installed the Jetson.GPIO on the 2GB jetson nano ,But the jupyter still remind me No module named 'Jetson'.

  #65 opened 3 years ago by Q455
  5

• Jetson.GPIO warning

  #62 opened 3 years ago by basfari
  3

• GPIO interrput

  #60 opened 3 years ago by shaonianlg
  5

• Modified example `button_interrupt.py` makes my Jetson Xavier NX freeze and reboot

  #58 opened 3 years ago by gustavovelascoh
  7

• PWM and interrupt cannot work together

  #59 opened 3 years ago by zhouzhiwen2000
  7

• Containerized gpio access

  #52 opened 4 years ago by sashabel
  17

• Install nvidia jetson-gpio on docker container

  #53 opened 3 years ago by MostafaRafea19
  4

• Unhandled exception in thread started by <function _poll_thread at 0x...>

  #57 opened 3 years ago by camielverdult
  1

• Invalid Channels

  #56 opened 4 years ago by kaloomte
  2

• how to use 4 PWM with the library on Jetson Xavier NX?

  #55 opened 4 years ago by AndreV84
  3

• GPIO setup with initial state dips voltage down for ~300us

  #54 opened 4 years ago by fabiomanz
  2