SAIC-iSmart-API/saic-home-assistant-addon

Issues

• Appears to be installed but always shows "Start" option as if it has stopped?

  #110 opened 2 months ago by Johndowne
  0

• View 2 cars in Home Assistant

  #109 opened 3 months ago by gawin77
  2

• gmqtt warning: "Trying write to closed socket"

  #102 opened 3 months ago by Inarion
  4

• MG3 Problem

  #107 opened 3 months ago by Atosmanic
  2

• Vehicle to Load

  #105 opened 4 months ago by Annaka007
  1

• Error since Update

  #104 opened 5 months ago by 00Twister00
  4

• No windows status or control on MG5

  #95 opened 5 months ago by svenove
  3

• Option 'SAIC_URI' does not exist in the schema for SAIC MQTT Gateway (Python)

  #103 opened 5 months ago by smokin76
  2

• Document how to use charging-stations.json with Home Assistant

  #101 opened 6 months ago by zusorio
  0

• Error since home assistant update

  #99 opened 7 months ago by merlin-marvin
  2

• MG4 gibt falsche werte aus

  #98 opened 7 months ago by scooterama
  1

• Rename entities?

  #97 opened 7 months ago by svenove
  0

• SoC Target

  #94 opened 7 months ago by coolrunning5360
  3

• K8s add-on

  #96 opened 7 months ago by fe-ax
  0

• Idiot's guide

  #87 opened 8 months ago by Euan-p
  6

• Idiots' guide

  #26 opened a year ago by npa-homeassistant
  5

• Unavailable Values now

  #81 opened 8 months ago by coolrunning5360
  13

• Error message: handle_vehicle loop failed during SAIC API call

  #78 opened 9 months ago by DrKoma21
  5

• Question: Are multiple cars supported?

  #75 opened 9 months ago by DCSBL
  3

• Imperial Measurement

  #76 opened 9 months ago by a-d-r-i-a-n-d
  2

• Car keeps connecting to my phone, steeling my Bluetooth and wifi

  #71 opened 10 months ago by donovan4d
  3

• Updates in real time MG4

  #68 opened 10 months ago by manulena
  5

• [QUESTION] How to set temperature remotely

  #66 opened 10 months ago by fgsch
  6

• Sensor for consumption since last charge

  #47 opened a year ago by GregorEstebanCardosoSchiller
  3

• Reading setting Target SOC

  #60 opened a year ago by WBoerhoop
  1

• SAIC_PHONE_COUNTRY_CODE not present in 0.5.10

  #63 opened a year ago by uek06
  3

• Error 1000020, message: The country code not exist !

  #57 opened a year ago by uek06
  13

• SAIC Login Fails when starting

  #53 opened a year ago by N0thingSpecial
  15

• How to identify URI for other countries

  #33 opened a year ago by nickh66
  4

• Any thoughts on this?

  #46 opened a year ago by Kilberz
  2

• ValueError: non-hexadecimal number found in fromhex() arg at position 4

  #51 opened a year ago by GamEased
  11

• Home Assistant car state not being updated when vehicle starts

  #49 opened a year ago by jfreves
  0

• Please add decimal point to lat / long values

  #50 opened a year ago by jivesinger
  3

• Questions about implementing custom cards

  #48 opened a year ago by OpherV
  8

• Front window heating enables "Blowing only"

  #40 opened a year ago by DreamT80
  4

• Request for Force Update Command in Python MQTT Gateway

  #43 opened a year ago by acmeGR
  1

• charger: Disconnected

  #44 opened a year ago by v8schlumpf
  0

• Logout der ISmart App

  #42 opened a year ago by 00Twister00
  1

• HVAC don't work

  #34 opened a year ago by nesbeal
  2

• MPDispatcherBody.uid: out of data (At bit offset: 58)

  #35 opened a year ago by jomach
  1

• [Python] Addon 0.3.0 crashes with marvel r (HA_discovery)

  #25 opened a year ago by WBoerhoop
  23

• 0.3.0 auto-discovery, missing soc_kwh

  #27 opened a year ago by DreamT80
  6

• Can't login

  #32 opened a year ago by kevinVl
  2

• Change from KM to Miles

  #28 opened a year ago by dannyb2100
  1

• decoding error after fresh install

  #31 opened a year ago by DrGBHindert
  1

• Not getting any updated values anymore

  #29 opened a year ago by Jonathandenb
  2

• Python Gateway always crashes after short period of time

  #30 opened a year ago by bjoernkowarsch
  1

• How to chance A/C setpoint?

  #20 opened a year ago by Krogstrup
  2

• More of a question than an issue.

  #21 opened a year ago by Kilberz
  1

• Key Error: 'LSXXXXXXXXXXXXXXXX'

  #22 opened a year ago by Kilberz
  2