VoronDesign/Voron-Tap

Issues

• Add Warning About Semi-Transparent Printed Parts

  #89 opened 5 months ago by ampp33
  0

• pg 28 is overly smarmy, plz explain how the magnet holders are supposed to mount

  #87 opened 6 months ago by wirehead
  0

• Front pockets for diagonal SHCS heads undersized?

  #86 opened 6 months ago by SebKuzminsky
  0

• LDO MGN12H Carriage End Caps Not Flush - Possibly Others

  #51 opened 6 months ago by Darkstar77
  28

• Continue to support MGN9H

  #63 opened 6 months ago by jueank
  4

• Recommend adding thread locker to M3 SHCS attaching linear rail to center section.

  #73 opened 2 years ago by metzgarj
  1

• Magnet Holder possible improvement

  #79 opened 6 months ago by xanxaz
  2

• Clarify role of solder jumper in operation of Optotap v2.4.1

  #84 opened a year ago by thclark
  0

• TabbedOpticalPCB_Left R8

  #83 opened a year ago by Levitron86
  0

• Does this voron0.2 work?

  #82 opened a year ago by tianyi725
  1

• Incorrect stl file names in manual

  #81 opened a year ago by wathiede
  0

• Incorrect bolt length for rail

  #71 opened 2 years ago by Furcube
  2

• strong wobble

  #78 opened a year ago by minosyansk
  3

• Placement of D1 LED on OptoTap v2.4

  #76 opened a year ago by jonesuki
  2

• Upper/Front attachment causes large warp

  #49 opened 2 years ago by GaryBoone
  3

• Stronger ears for belt

  #75 opened 2 years ago by locki-cz
  1

• jlcpcb - Incorrect Part Placement?

  #59 opened 2 years ago by thijstriemstra
  9

• Sensor compatibility

  #72 opened 2 years ago by proxyissues
  0

• Questions Regarding the Use of Voron-Tap

  #70 opened 2 years ago by leeeboo
  2

• Hall Effect Magnet Issues - Hard to press fit and magnet cracks print

  #58 opened 2 years ago by TheFuzzyGiggler
  1

• SB issues when using CW1 Mod

  #65 opened 2 years ago by ChrisWhite1985
  2

• RTV silicone doesn't work to hold magnets in carriers

  #54 opened 2 years ago by fwiffo
  0

• PDF assembly instructions

  #57 opened 2 years ago by trampas
  1

• Additional head assemblies

  #56 opened 2 years ago by trampas
  1

• Cracks on top bolts on [a]tap_center_r6

  #50 opened 2 years ago by SinisterRj
  4

• Toolhead mounting screw clearance seems to be wrong

  #48 opened 2 years ago by ressu
  2

• U2 AP63205 Can suffer catastrophic failure under some circumstances

  #42 opened 2 years ago by pii100
  10

• Consider increasing depth of solder blob relief for the JST in Tap_Upper_PCB CAD from 1mm to 2mm, to reflect actual pin length/needed relief

  #40 opened 2 years ago by nearctx
  2

• PCB needs EMI and grounding improvements (and other remarks)

  #45 opened 2 years ago by tionebrr
  2

• Broken link in Manual

  #47 opened 2 years ago by MapleLeafMakers
  0

• Documentation clarification suggestion

  #52 opened 2 years ago by TheFuzzyGiggler
  0

• Documentation: X endstop should be shown in different orientation

  #31 opened 2 years ago by top-gun
  4

• Opb961 + electric components fix for manual

  #28 opened 2 years ago by artemen
  1

• One null too much in the description

  #41 opened 2 years ago by vjeko2404
  0

• Fun Fact Voids™

  #10 opened 2 years ago by Durahl
  5

• Wrong link to "Tap-Klipper Instructions"

  #19 opened 2 years ago by GuidoHendriks
  2

• Assemble Sensor instructions should address position of solder work

  #20 opened 2 years ago by ditdafivo
  5

• Typo in manual about BOM heatset inserts

  #23 opened 2 years ago by contrapuntal
  2

• Brass threaded insert causing magnet not to sit flush

  #24 opened 2 years ago by contrapuntal
  8

• Manual errata P29 - "When tightened, the M3x12 head will still be above the rail surface and act as a carriage" - "stop" missing?

  #25 opened 2 years ago by ps-bond
  2

• Chamfer in hole

  #38 opened 2 years ago by Lelle79
  1

• X-Rail mount step doesn't say it's mounting to X-Rail

  #36 opened 2 years ago by mobilemcclintic
  0

• Center void on magnet holders different sizes.

  #35 opened 2 years ago by blgli
  1

• More information for [stepper_z] section in klipper firmware manual for Tap needed.

  #27 opened 2 years ago by kyleisah
  3

• update FAQ regarding hartk pcb

  #34 opened 2 years ago by Surion79
  0

• Holes for CW2 mounting not centered.

  #21 opened 2 years ago by krankydonkey
  3

• klipper config instruction should instruct the user to remove position_endstop

  #26 opened 2 years ago by MapleLeafMakers
  2

• MGN12 Carriage does not lay flat on Tap_Center

  #15 opened 2 years ago by joseph-greiner
  5

• (small) Error in the Assembly Manual

  #7 opened 2 years ago by laserbeak
  3

• Manual Link pg 15

  #14 opened 2 years ago by Voodoobrew101
  1