arduino/ArduinoCore-megaavr

Issues

• The pinMode(pin,OUTPUT) can't initialize the pin in HIGH state on a Nano Every

  #143 opened 18 days ago by drf5n
  10

• digitalWrite() backwards compatibility problem

  #86 opened 4 years ago by benwillcocks
  1

• uno wifi rev 2

  #142 opened 3 months ago by raa18-git
  0

• Unexpected problem-causing definition of initVariant()

  #141 opened 5 months ago by Sergio-Slobodrian
  0

• Nano Every on linux: "avrdude: jtagmkII_getsync(): sign-on command: status -1" when uploading sketches

  #124 opened 2 years ago by chconnor
  16

• This implementation conflicts with SMBus specification

  #139 opened 7 months ago by tamebits
  1

• Sleeping does not decrease current draw

  #137 opened a year ago by Electric131
  1

• GCC and Bookworm issues with Arduino UNO WIFI Rev 2 board

  #134 opened a year ago by steinerrw
  2

• SoftwareSerial sends illegal characters after initialization

  #132 opened a year ago by thorv
  0

• Upload to Uno WiFi Rev2 fails on fuse5 verification when using AVRDUDE 7.0

  #119 opened 3 years ago by per1234
  15

• No driver found for ATm32U4DFU / Uno Wifi Rev2

  #130 opened 2 years ago by loulouMS
  3

• Compiled MuxTo binary too large

  #103 opened 3 years ago by thomome
  14

• Update toolchain/Atmel packs

  #64 opened 5 years ago by MCUdude
  8

• Wire library has no timeout functionality (meaning it is blocking).

  #83 opened 5 years ago by second-pair
  3

• MuxTO UART reception problem

  #128 opened 2 years ago by chalupec
  2

• Arduino Nano Every VCP/USB (SAMD11) fails after reconnecting several times

  #125 opened 2 years ago by tehkillerbee
  2

• Deployed platform.txt in v1.8.7 is not the good one

  #123 opened 2 years ago by landret
  3

• Arduini Nano Every avrdude EEPROM writing issue.

  #120 opened 2 years ago by mcuee
  3

• avrdude fuse5 warning?

  #121 opened 3 years ago by RobMorhard
  0

• Nano every reset

  #118 opened 3 years ago by ganghuang
  3

• `digitalWrite` has a wrong signature

  #68 opened 5 years ago by Avamander
  2

• Using Arduino NANO Every as SLAVE in SPI communication

  #67 opened 5 years ago by bridystone
  7

• Datasheet for Nano Every/Wifi Rev 2 entries for I2C and A4/A5, A6/A7 query?

  #116 opened 3 years ago by diyelectromusic
  3

• Possible off-by-one error in analogRead?

  #117 opened 3 years ago by diyelectromusic
  0

• Wire.setClock() keeps SCL low with 800kHz

  #107 opened 4 years ago by Koepel
  1

• Run an exact millis() timer...

  #73 opened 5 years ago by WestfW
  5

• SLEEP_MODE_IDLE return without entering sleep

  #113 opened 3 years ago by chansheunglong
  5

• [Technical Question] USB passthrough possible with custom firmware?

  #110 opened 4 years ago by RoiEXLab
  4

• Slightly misleading "compatibility spec"

  #108 opened 4 years ago by RoiEXLab
  3

• TWI in slave mode using port PF2 and PF3

  #66 opened 5 years ago by rlivio
  3

• *.replace(); does not work on Arduino Uno Wifi Rev. 2

  #109 opened 4 years ago by oppaernst
  0

• MLX90614 I2C communication on Arduino Nano Every

  #88 opened 4 years ago by omersa
  9

• SPI default configuration fails

  #106 opened 4 years ago by JojoS62
  1

• Arduino Nano Every no Serial Communication after Start

  #102 opened 4 years ago by NelsonIg
  2

• Compiling fails when using precompiled library

  #100 opened 4 years ago by landret
  2

• Arduino Wifi Rev2, bug when reading duty cycle value on pin 6

  #91 opened 4 years ago by landret
  3

• Wifi Rev2 Upload Issues (verification error;content mismatch)

  #89 opened 4 years ago by nametable
  7

• F() Flash Macro No Longer Recognized

  #62 opened 4 years ago by woolseyj
  38

• Latest core versions have not been released

  #95 opened 4 years ago by woolseyj
  0

• TWI_MasterSetBaud hides functionality

  #78 opened 5 years ago by apozharski
  0

• Long Response Times for XMLHttpRequest();

  #74 opened 5 years ago
  1

• DigitalWrite/TurnOffPWM interferes with alternative Timers

  #75 opened 5 years ago by bridystone
  0

• Arduino Nano Every SoftWareSerial Bug

  #70 opened 5 years ago by w00000dy
  0

• arvdude: Warning: invalid value for unused bits in fuse "fuse5"....

  #71 opened 5 years ago by DGL-New2U
  0

• IDE "Port" is grayed

  #69 opened 5 years ago by kklmn
  2

• Compile problems with arduino uno wifi rev2

  #60 opened 5 years ago by philipzellweger
  2

• Bossac for Linux

  #65 opened 5 years ago by roboticboyer
  2

• Serial interface problem with Arduino Nano Every

  #63 opened 5 years ago by laurencebarker
  2

• Nano Every: analogRead(...) gives only 1023

  #61 opened 5 years ago by RudolfAtHome
  2

• Compatibility: delay() should call yield()

  #57 opened 6 years ago by dok-net
  2