davidscmx/radar-target-generation-and-detection
Configures the FMCW waveform based on the system requirements. Then defines the range and velocity of a target and simulates its displacement. For the same simulation loop process, the transmit and receive signals are computed to determine the *beat* signal. Then it performs a Range FFT on the received signal to determine the Range Towards the end, perform the CFAR processing on the output of 2nd FFT to display the target.
MATLAB
Stargazers
- 33ss1055
- 9-415
- Alice0809
- Boda-Liu
- chaohuazhu
- Easha99
- fatassassin
- ganzhe123
- Haotiantiantian
- IAMKWTUniversity of Electronic Science and Technology of China
- IntiSensor
- ishuahualiuya
- jocelynZXY
- jokerstan
- kevin-xia
- kyrinD
- leejunghan
- lin2467
- lisa-liyirong
- LIUHankaiTianjin University
- misakimei9
- mitoksimCalifornia
- nihongtianxin
- PilotWang
- ptrksUnited States
- qbb-starYanShan University
- S-un-qiu
- Scarlett994
- vicumi
- weaklllll
- WeCan-ai
- wissamghz
- wuchao15
- wuweh
- WZBingo
- zhangshengnan96KWAI