erikvoh

erikvoh's Stars

• cantools/cantools

  CAN bus tools.

  Language:Python1.9k69351565

• CANopenNode/CANopenNode

  CANopen protocol stack

  Language:C1.4k119370653

• MaJerle/lwcell

  Lightweight cellular modem host AT library

  Language:C4073162153

• embedded-office/canopen-stack

  Free CANopen Stack for Embedded Systems

  Language:C39234106118

• khoih-prog/ESP_WiFiManager

  This is an ESP32 / ESP8266 WiFi Connection Manager with fallback web configuration portal. Use this library for configuring ESP32 (including ESP32-S2 and ESP32-C3), ESP8266 modules' WiFi, etc. Credentials at runtime. You can also specify static DNS servers, personalized HostName, fixed or random AP WiFi channel. With examples supporting ArduinoJson

  Language:C++373248297

• raomin/ESPAltherma

  Monitor your Daikin Altherma / ROTEX heat pump with ESP32

  Language:C34743255118

• moonglow/pcan_cantact

  :robot: XCAN firmware for CANtact ( CANable ) or any other similar boards.

  Language:C3372412190

• Arnold-n/P1P2MQTT

  Monitor and control Daikin/Rotex (hybrid/Altherma) heat pumps via the 2-wire P1/P2 thermostat interface with an ATmega328P, ESP8266, and electronics. The P1P2Serial library and P1P2Monitor program perform low-level bus operation, the P1P2-bridge-esp8266 program interprets data from/to MQTT supporting Home Assistant MQTT discovery. P1P2Serial may also be used for other Japanese Home Bus System based standards: DIII-NET (F1/F2) bus, Mitsubishi M-Net bus, Toshiba TCC-Link, Hitachi H-link, Panasonic/Sanyo SIII-Net, Haier, York, and others.

  Language:C++309584761

• arcanis/secretsanta

  Host secret santa without leaking your guests' informations 🎄

  Language:HTML2661118169

• tinypico/tinypico-hardware

  Hardware design files for TinyPICO and Shields

  Language:AGS Script247292759

• Inteform/esp32-lora-library

  Low-level Lora (SX127_) library for the ESP-32 IDF

  Language:C213152159

• stuartpittaway/diyBMSv4ESP32

  diyBMS v4 code for the ESP32 and new controller hardware

  Language:C++1842223881

• softwarecrash/Solar2MQTT

  ESP8266 based WiFi and MQTT interface for MPPT Inverters that use watchpower

  Language:C++1571810934

• STMicroelectronics/stm32-mw-openbl

  Provides the Open Bootloader library, part of the STM32Cube MCU Component "middleware", for all STM32xx series.

  Language:C15715533

• softwarecrash/Daly2MQTT

  ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems

  Language:C++147188532

• CANopenNode/CANopenEditor

  CANopen Object Dictionary Editor

  Language:C#133107962

• gregdavill/obsidian-boa

  Compact ESP32-S2 development board.

  10315316

• ai-republic/bms-to-inverter

  Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an inverter using any protocol (e.g. UART, RS485, ModBus or CAN)

  Language:Java9095114

• Crazy-Geeks/STM32-W25Q-QSPI

  STM32 Winbond W25Q memory Quad SPI Driver

  Language:C813827

• acoolstraw/earl-grey

  Elegant dark theme for Gitea

  Language:CSS49455

• qca/qca7000

  UART/SPI drivers for Qualcomm Atheros QCA7000 serial-to-powerline bridge chip. This version is specific to Linux 2.6.35 and Freescale iMX28 CPU.

  Language:C4911846

• juamiso/PYLON_EMU

  Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)

  Language:Python4114310

• devolo/dlan-greenphy-sdk

  The devolo dLAN Green PHY module is ideal for installation in all IoT-devices. Includes QCA7000 chipset and LPC1758 host processor.

  Language:C4022924

• livechat/copycat

  Synchronize files between repositories

  Language:JavaScript341509

• bakhshipoor/STM32H7-W25Q128-External-Loader

  W25Q128 External Loader for STM32H7

  Language:C21202

• SummerFalls/pcan_cantact

  :robot: PCAN firmware for CANtact ( CANable ) or any other similar boards.

  Language:C19227

• Selective031/RazorBoard

  Language:C89192

• mhei/OpenV2G

  Language:C3301