home-climate-control/dz

Issues

• Economizer sample telemetry is not emitted when indoor temperature falls below target

  #328 opened 2 months ago by climategadgets
  0

• Implement a command line tool

  #324 opened 4 months ago by climategadgets
  0

• Remove behavior from ZoneSettings

  #326 opened 4 months ago by climategadgets
  1

• Remove duplicate EconomizerSettings

  #327 opened 4 months ago by climategadgets
  1

• Allow the schedule to specify a setpoint range

  #325 opened 4 months ago by climategadgets
  0

• Implement RSocket communicator

  #323 opened 4 months ago by climategadgets
  0

• Implement platform specific build for jibDockerBuild task

  #305 opened 10 months ago by climategadgets
  0

• Google Calendar event change doesn't get picked up

  #319 opened 8 months ago by climategadgets
  0

• Eliminate control input lag

  #322 opened 5 months ago by climategadgets
  1

• Make Thermostat PID controller configuration values HVAC mode independent

  #299 opened a year ago by climategadgets
  0

• Allow ProcessController to exist without a setpoint

  #314 opened 7 months ago by climategadgets
  0

• Propagate error signal further in process control pipeline

  #321 opened 7 months ago by climategadgets
  0

• Economizer runs forever when there is an ambient sensor failure

  #320 opened 7 months ago by climategadgets
  1

• Add economizer settings to Zone visualization

  #318 opened 8 months ago by climategadgets
  1

• Application hangs on not quite resolved configuration

  #317 opened 8 months ago by climategadgets
  1

• "Off schedule" indicator always indicates true

  #316 opened 8 months ago by climategadgets
  0

• Augment calendar schedule period definition with entities that came to existence since its creation

  #311 opened 9 months ago by climategadgets
  1

• Provide a system wide way to specify measurement units

  #315 opened 9 months ago by climategadgets
  0

• last-imperative-maintenace branch fails to build because of owapi-reborn

  #313 opened 9 months ago by climategadgets
  1

• Migrate submodule builds to a Composite Build

  #310 opened 9 months ago by climategadgets
  1

• last-imperative-maintenace branch fails to build on JDK17

  #312 opened 9 months ago by climategadgets
  1

• Adjust signal pipeline so that variable output and multistage devices can be fully utilized

  #294 opened a year ago by climategadgets
  0

• Review dependency management

  #307 opened 9 months ago by climategadgets
  1

• Enforce uniform coding style

  #309 opened 9 months ago by climategadgets
  2

• Review memory footprint correlated with dependency upgrades

  #308 opened 9 months ago by climategadgets
  1

• Syntax error in a resource usage counter renders the system inoperable

  #306 opened 10 months ago by climategadgets
  0

• Implement Gradle version catalog

  #302 opened a year ago by climategadgets
  0

• Simplify project directory layout

  #304 opened a year ago by climategadgets
  0

• Invalid Zigbee2MQTT payload causes a cascading failure

  #303 opened a year ago by climategadgets
  1

• "Invalid modes mode: heat" in Home Assistant log

  #301 opened a year ago by climategadgets
  0

• Replace obsolete JVM source/target syntax with current

  #283 opened a year ago by climategadgets
  0

• Port the raise() logic from imperative to reactive code

  #300 opened a year ago by climategadgets
  1

• Create the discovery packet to expose the configuration to human UI applications

  #298 opened a year ago by climategadgets
  1

• Make the service locally discoverable

  #297 opened a year ago by climategadgets
  1

• MQTT devices relying on retained messages may not work correctly

  #296 opened a year ago by climategadgets
  1

• Multiple ESPHome logical devices per physical device will report "available" only for one random

  #295 opened a year ago by climategadgets
  0

• Implement "reset usage counter" operation in Reactive Console

  #288 opened a year ago by climategadgets
  0

• Decouple possibly faulty actuators from control logic so that the processing pipeline doesn't get stuck

  #292 opened a year ago by climategadgets
  1

• Implement variable output single mode HVAC device

  #293 opened a year ago by climategadgets
  0

• Economizer: control a HVAC device, not a switch

  #291 opened a year ago by climategadgets
  0

• "Sticky" sensors confuse economizer process control logic

  #290 opened a year ago by climategadgets
  1

• Support "optimistic" switches

  #280 opened a year ago by climategadgets
  0

• Make usage information an integral part of HVAC device status

  #289 opened a year ago by climategadgets
  0

• Backport usage counters from imperative to reactive code base

  #287 opened a year ago by climategadgets
  0

• Provide Home Assistant Climate integration

  #286 opened a year ago by climategadgets
  2

• Clean up and update documentation to make the reactive branch the trunk

  #284 opened a year ago by climategadgets
  0

• Late night brown bag thread safety violation

  #285 opened a year ago by climategadgets
  0

• Refactor schedule consumption to be really reactive

  #281 opened a year ago by climategadgets
  1

• Sonar nagging about nullability

  #282 opened a year ago by climategadgets
  2

• Figure out why Flux.delayElements() and Mono.delayElement() break the HeatPump

  #279 opened a year ago by climategadgets
  0