ironsheep/lightning-detector-MQTT2HA-Daemon

Issues

• Not running on a RPi!

  #25 opened 6 months ago by WirthmU
  0

• Sensor settings doesn't reflect what is configured in the config.ini

  #18 opened 4 years ago by somejavadev
  3

• Tuning Frequency is Far Off

  #23 opened 3 years ago by ocona040
  2

• Docker-Image available?

  #24 opened 2 years ago by kovu94
  0

• Not sure if --calc_tuning_cap is working right

  #10 opened 4 years ago by lightmaster
  19

• Home Assistant YAML configuration for sensors

  #22 opened 3 years ago by peteeee
  0

• Problems with reading config.ini file

  #21 opened 3 years ago by grilli303
  1

• Stupid Question from A New HA User

  #20 opened 4 years ago by echellst
  8

• Question on noise level

  #19 opened 4 years ago by julianrinaldi
  5

• MQTT lightningdetector/detect not updating count and distance

  #8 opened 4 years ago by lightmaster
  10

• Spi bus tuning_cap Error

  #17 opened 4 years ago by keyj9
  2

• Provide an MQTT subscription triggered version

  #16 opened 4 years ago by LouPaloma
  5

• [Improvement] Hardlink to system tools

  #14 opened 4 years ago by lightmaster
  2

• I2C Write Error

  #13 opened 4 years ago by lightmaster
  10

• i2c broken?

  #11 opened 4 years ago by Zebble
  2

• Could you add an SPI interface?

  #7 opened 4 years ago by terrycarlin
  24

• Adjust script so it can run as systemd daemon

  #6 opened 4 years ago by ironsheep
  2

• Finish implementation of new allocate to bucket logic

  #1 opened 4 years ago by ironsheep
  2

• Add logic to post our storm as ended status

  #3 opened 4 years ago by ironsheep
  2

• Ensure sensor reports distances in correct units

  #5 opened 4 years ago by ironsheep
  2

• Let's make sure our sensor re-appears after HA restart

  #2 opened 4 years ago by ironsheep
  2

• Bin needs to close after time ends for period (is currently closing at first detection after period end)

  #4 opened 4 years ago by ironsheep
  2