olkal/HX711_ADC

Issues

• 20MHz crystal oscillator doesn't work with hx711

  #135 opened a month ago by RafaelFerrari95
  3

• getNewCalibration get wrong factor

  #134 opened 3 months ago by PandaBalls
  3

• SCK_DELAY also needed for RP2040 / Raspberry Pi Pico

  #133 opened 5 months ago by pkElectronics
  2

• How to read the value in setup method

  #131 opened 5 months ago by Eashubh128
  5

• How , do I set calibration factor for 2 different channels

  #128 opened 7 months ago by thapliyal128
  4

• Hi, did the mass value needed for the calibration its unit is gram or something else?

  #130 opened 7 months ago by noobandpro
  1

• Compatibility issue with ESP32-S3 Dev Board

  #129 opened 7 months ago by solrac3f
  3

• tare at startup

  #125 opened 9 months ago by ilker-aktuna
  6

• DOUT and SCK PIN declarations

  #124 opened a year ago by meakashrao
  1

• Understanding Multi Point Calibration

  #121 opened a year ago by meakashrao
  2

• Strange Observation

  #123 opened a year ago by Sudupatil
  4

• Question about HX711_ADC::start functions

  #122 opened a year ago by duese97
  1

• help wanted: How to set Sampling rate from ESP32

  #120 opened a year ago by Sudupatil
  8

• No real issue - pls provide an example on how to use New funtions from v1.2.12

  #118 opened a year ago by heinerolli
  4

• Read_2x_load_cell example not working - potential issue with calling .begin() on multiple HX711_ADC objects

  #119 opened a year ago by adamwhats
  2

• Regarding compatibility with Arduino Stm32 official core

  #96 opened a year ago by anandspathak
  14

• Some error While test

  #117 opened a year ago by Sudupatil
  2

• UNITTTTTTTT!!!!!!!!!!!!!

  #116 opened a year ago by OrlandoM1790
  4

• Slow data readings

  #115 opened 2 years ago by ilpantera
  4

• Load_cell output val: NAN

  #111 opened 2 years ago by YPayal
  6

• Have problem with starting the code.

  #114 opened 2 years ago by nqkoisirobo22
  2

• Question on Smoothing

  #113 opened 2 years ago by Abasz
  2

• Test.ino issue

  #110 opened 2 years ago by Sofronio
  3

• ESP32 Wroom Pin For CLK

  #112 opened 2 years ago by Sudupatil
  2

• Read Raw data withouth smoothing.

  #109 opened 2 years ago by joseluislucas
  4

• Nordic 52832 Examples and Tut

  #108 opened 2 years ago by LiveRock
  5

• Prevent Resetting of Null Weight when using HX711 with a load cell

  #107 opened 2 years ago by atharvaaalok
  3

• tare function does not tare

  #106 opened 2 years ago by strud
  4

• Read 4X load cells

  #90 opened 3 years ago by Jlaast
  4

• Problem with 2 HX711 and pin occupancy

  #105 opened 2 years ago by Jonewbie69
  4

• Problem with LoadCell.tareNoDelay() and LoadCell.getTareStatus()

  #103 opened 2 years ago
  3

• Problem with LoadCell.tareNoDelay();

  #104 opened 2 years ago by prashantlsharma
  3

• Problem with the loadcell

  #99 opened 3 years ago by opapferdi
  12

• using channel A + B together

  #97 opened 3 years ago by vina258466
  4

• Problems with the EEPROM

  #101 opened 3 years ago by burkhardtnb5
  3

• Unstable value

  #95 opened 3 years ago by wrinkledmind
  5

• Can't get the HX711 to read values from load Cell

  #100 opened 3 years ago by JayShack
  7

• Significant slowdown in data reading speed. HX711_ADC.cpp#L347

  #93 opened 3 years ago by lonelymyp
  5

• Understanding Settling and Conversion Time

  #98 opened 3 years ago by anthnt
  3

• setSamplesInUse();

  #89 opened 3 years ago by boromyr
  7

• Slow Reading Updates

  #94 opened 3 years ago by ajkochev
  7

• Set Gain to 32 bit

  #88 opened 3 years ago by gorogdaniel
  5

• Reading data from Teensy4.1

  #91 opened 3 years ago by ICYou
  3

• heap initialisation

  #87 opened 3 years ago by foofel
  1

• Hx711 reading not correct after calibration

  #84 opened 3 years ago by SayedBaqer
  4

• Missing Timing

  #81 opened 3 years ago by dsafak
  16

• How to save Load cell data in SD card ?

  #86 opened 3 years ago by nyeas001
  2

• Need help with saving load cell file in SD card

  #85 opened 3 years ago by nyeas001
  1

• Error compiling ESP12E

  #83 opened 3 years ago by Sutikno1406
  4

• How to preserve weight after power restart?

  #82 opened 3 years ago by frobert
  3