sbcshop
SB Components is a UK-based Research and Development company that has been providing embedded, IoT, AI and Robotics based solutions since 2012.
SB Components LtdLondon
Pinned Repositories
HackyPi-Hardware
HackyPi is a compact and versatile USB device powered by the RP2040 microcontroller. It is a powerful tool for both ethical hacking and learning programming, compatible with all major operating systems. You can program using python language.
HackyPi-Software
HackyPi is a compact and versatile USB device powered by the RP2040 microcontroller. It is a powerful tool for both ethical hacking and learning programming, compatible with all major operating systems. You can program using python language.
MotorShield
Designed to help you get your Raspberry Pi based Robot. This board can control DC motor as well as the stepper motor. You can connect your IR and Ultrasonic sensors to tell your robot about its environment. You can easily make your Line Following, Object following, Wall following, Maze-Solver Robots.
PiMecha
PiMecha is a Raspberry Pi Humanoid Robot with 17 DOF
PiRelay-V2
PiRelay-V2 is developed by SB Components with the potential to control 4 appliances and loads up to 20V AC/ 7 A, 30V DC/ 10A to provide a way to control the high voltage/current devices.
Raspberry-Pi-Pico-RFID-Expansion
Raspberry Pi Pico RFID Expansion is the latest technology in the range of SB Component products boasting an advanced RFID Reader at the frequency of 125KHz
RoundyPi
RoundyPi is a round LCD display based on RP2040 along with a compact and stylish 1.28-inch display module of 240×240 resolution, 65K RGB colors, clear and colorful displaying effect, expand its engagement with your project. RoundyPi comes with an embedded GC9A01 Driver and SPI Interface that minimize the required IO pins.
SB-RFID-HAT
This is a Raspberry Pi RFID HAT Module operating in the 125Khz frequency range. It supports two communication interfaces: UART for RFID and I2C for Oled Display.
SB-Serial-Expansion-Hat
A guide to install and use SB- Serial expansion HAT on Raspberry pi with examples.
SB_Serial_Servo
SB Serial Servo Code for Serial UART Communication via computer, Raspberry Pi, and Arduino.
sbcshop's Repositories
sbcshop/Raspberry-Pi-Pico-Breadboard-Kit
Raspberry Pi Pico Breadboard Kit is a multi-purpose Kit that consists of a “400 points half-size breadboard” on top, a Programmable Buzzer, 4 Programmable LEDs, 4 Push buttons, and dedicated 5V, 3v3, and GND pins at a single place.
sbcshop/EncroPi-Software
It is an innovative and highly efficient USB RTC stick based on the Raspberry Pi RP2040 microcontroller. It is a power booster product for all electronic enthusiasts and time setters. We have designed EncroPi in such a way that its powerful and advanced features will help you in your projects seamlessly.
sbcshop/ReadPi_RFID_Software
ReadPi 125 KHz frequency based RFID Reader powered by Raspberry Pi Pico W unit. This github provides getting started guide and other working details for ReadPi RFID version.
sbcshop/USB-UART-I2C-Debugger
USB UART/I2C Debugger comprises a chip that supports full-speed USB (12 Mb/s). It runs I2C with up to 400 kHz clock rates. The UART baud rates come between 300 and 460800. It can operate on 3.3V or 5V logic levels via selection jumper.
sbcshop/ReadPi_RFID_Hardware
ReadPi RFID 125KHz Reader powered by Raspberry Pi Pico W. In this github repo you will find Hardware design files for ReadPi RFID
sbcshop/Ardi-32_Software
Ardi-32 is the ultimate Arduino Uno alternative packed with powerful specs and exciting features in the Arduino Uno form factor. Ardi-32 is powered by the latest ESP32-S3-WROOM-1. This github provides getting started guide and other working details for Ardi-32
sbcshop/ArdiPi_Hardware
ArdiPi the ultimate Arduino Uno alternative packed with powerful specs and exciting features. In this github repo you will find hardware files for ArdiPi.
sbcshop/ESPi_Software
ESPi, with its powerful ESP32 and Ethernet, is the ideal answer for your networking requirements. This repository contains a step-by-step guide for getting started with the ESPi board.
sbcshop/GatePi-4CH
GatePi is a low-power consumption data transmission board, that comes with an onboard CH340 USB TO UART converter, Voltage Level Translator(74HC125V), E22-400T22S/E22-900T22S SMA antenna connector that covers 433/868/915 MHz frequency band, 4-Ch Relays, IPEX antenna connector, LoRa™ Spread Spectrum Modulation technology with auto multi-level repeating. GatePi is developed to enable data transmission up to 5 KM through the serial port.
sbcshop/GPS-Hat-for-Raspberry-Pi
The extremely compact and powerful GNSS module GPS HAT for Pi is a concurrent receiver module that integrates GPS with the BeiDou system. It's pin-to-pin compatible with Quectel's GNSS module L76 and can receive both GPS and BeiDou open service L1 signals at the same time. GPS HAT for Pi can acquire and track any mix of GPS and BeiDou signals thanks to its 33 tracking channels, 99 acquisition channels, and 210 PRN channels. When compared to utilizing simply GPS, enabling both GPS and BeiDou doubles the number of visible satellites, reduces the time to first fix, and improves positioning accuracy, especially in congested urban areas.
sbcshop/8_channel_IO_Level_Converter_Breakout
This 4-channel & 8-channel input opt isolator board produces clean, regulated 3.3-5V signals on the output side and accepts nominal voltages of 5-24V (maximum of 40V) on the input side. A LOW/grounded state fed into an input will result in a LOW/wrecked state on the output, and vice versa.
sbcshop/ESPi_Hardware
ESPi, with its powerful ESP32 and Ethernet, is the ideal answer for your networking requirements. This Repository includes the Hardware files for ESPi board.
sbcshop/Type_C_Breakout
A Type-C breakout board is a hardware component that provides easy access to the pins and functionalities of a USB Type-C connector
sbcshop/USB-C-RTC-Software
The USB-C-RTC is a highly advanced device featuring an integrated DS3231 circuit; MCP2221. This GitHub provides getting started guide of USB-C-RTC
sbcshop/Ardi-32_Hardware
Ardi-32 the ultimate Arduino Uno alternative packed with powerful specs and exciting features. In this github repo you will find hardware files for Ardi-32.
sbcshop/Ardi_Display_Shield_Hardware
Ardi Display Shield features a vibrant 2" IPS screen with a resolution of 240 x 320 pixels, this shield seamlessly integrates with your Arduino Uno and compatible boards, Ardi32 and ArdiPi.In this github repo you will find hardware files for Ardi Display Shield
sbcshop/Ardi_Relay_Shield_Hardware
Ardi Relay Shield - a versatile 4-channel optoisolated relay board designed in the Arduino form factor, this shield seamlessly integrates with your Arduino Uno and compatible boards, Ardi32 and ArdiPi. In this github repo you will find hardware files for Ardi Relay Shield
sbcshop/Ardi_RFID_Shield_Software
Ardi RFID shield seamlessly integrates with your Arduino Uno and compatible boards, Ardi32 and ArdiPi. This github provides getting started guide and other working details for Ardi RFID Shield
sbcshop/Ardi_UHF_Shield_Hardware
In this github repo you will find hardware files for Ardi UHF Shield
sbcshop/ArdiPi_Software
ArdiPi the ultimate Arduino Uno alternative packed with powerful specs and exciting features in Arduino Uno form factor. You can enjoy a low-cost solution with access to the largest support communities for Raspberry Pi. This github provides getting started guide and other working details for ArdiPi.
sbcshop/GatePi-8CH
The 8-Channel GatePi Relay Board based on LoRa™ and RP2040 MCU is a low-power data transmission board and has all the features exactly similar to the 4 Channel Relay Board, except it has 8 relay channels for an increased capacity and efficiency. It is a low-power consumption data transmission board, that comes with an onboard CH340 USB TO UART conv
sbcshop/ReadPi_NFC_Hardware
ReadPi NFC 13.56MHz Reader/Writer powered by Raspberry Pi Pico W. In this github repo you will find Hardware design files for ReadPi NFC.
sbcshop/3.2_Touchsy_ESP-32_Resistive_Software
Touchsy ESP-32 offers the ideal display solution for users who favor ESP-32 over Raspberry Pi Pico W. This Github provides getting started guide for ESP32 Resistive Variant of Touchsy Family.
sbcshop/3.5mm-Audio-Jack-Breakout
This GitHub contains hardware design files for 3.5mm Audio jack breakout. With its versatility and ease of use, the 3.5mm jack breakout serves as an essential tool for audio experimentation, prototyping, and custom audio solutions in various applications.
sbcshop/Ardi_Display_Shield_Software
Ardi Display Shield features a vibrant 2" IPS screen with a resolution of 240 x 320 pixels, this shield seamlessly integrates with your Arduino Uno and compatible boards, Ardi32 and ArdiPi. This github provides getting started guide and other working details for Ardi Display Shield.
sbcshop/Ardi_Relay_Shield_Software
Ardi Relay Shield - a versatile 4-channel optoisolated relay board designed in the Arduino form factor, this shield seamlessly integrates with your Arduino Uno and compatible boards, Ardi32 and ArdiPi. This github provides getting started guide and other working details for Ardi Relay Shield
sbcshop/Pico_Terminal_GPIO_Expansion
Terminal GPIO Expansion allows you to use both terminal blocks and GPIO with male & female header options.This Repository includes the Hardware files for Pico Terminal GPIO Expansion.
sbcshop/Pressure_Sensor_with_PicoW_Hardware
In this github repo you will find Hardware design files for Pressure Sensor with Pico W.
sbcshop/Pressure_Sensor_with_PicoW_Software
This github provides getting started guide and other working details for Pressure Sensor Board for Pico W.
sbcshop/USB-C-RTC-Hardware
The USB-C-RTC is a highly advanced device featuring an integrated DS3231 circuit; MCP2221. This GitHub provides hardware design files of USB-C-RTC