sbcshop
SB Components is a UK-based Research and Development company that has been providing embedded, IoT, AI and Robotics based solutions since 2012.
SB Components LtdLondon
Pinned Repositories
HackyPi-Hardware
HackyPi is a compact and versatile USB device powered by the RP2040 microcontroller. It is a powerful tool for both ethical hacking and learning programming, compatible with all major operating systems. You can program using python language.
HackyPi-Software
HackyPi is a compact and versatile USB device powered by the RP2040 microcontroller. It is a powerful tool for both ethical hacking and learning programming, compatible with all major operating systems. You can program using python language.
MotorShield
Designed to help you get your Raspberry Pi based Robot. This board can control DC motor as well as the stepper motor. You can connect your IR and Ultrasonic sensors to tell your robot about its environment. You can easily make your Line Following, Object following, Wall following, Maze-Solver Robots.
PiMecha
PiMecha is a Raspberry Pi Humanoid Robot with 17 DOF
PiRelay-V2
PiRelay-V2 is developed by SB Components with the potential to control 4 appliances and loads up to 20V AC/ 7 A, 30V DC/ 10A to provide a way to control the high voltage/current devices.
Raspberry-Pi-Pico-RFID-Expansion
Raspberry Pi Pico RFID Expansion is the latest technology in the range of SB Component products boasting an advanced RFID Reader at the frequency of 125KHz
RoundyPi
RoundyPi is a round LCD display based on RP2040 along with a compact and stylish 1.28-inch display module of 240×240 resolution, 65K RGB colors, clear and colorful displaying effect, expand its engagement with your project. RoundyPi comes with an embedded GC9A01 Driver and SPI Interface that minimize the required IO pins.
SB-RFID-HAT
This is a Raspberry Pi RFID HAT Module operating in the 125Khz frequency range. It supports two communication interfaces: UART for RFID and I2C for Oled Display.
SB-Serial-Expansion-Hat
A guide to install and use SB- Serial expansion HAT on Raspberry pi with examples.
SB_Serial_Servo
SB Serial Servo Code for Serial UART Communication via computer, Raspberry Pi, and Arduino.
sbcshop's Repositories
sbcshop/Lora-HAT-for-Raspberry-Pi
Pi LoRa™ Lora Hat is a low-power consumption data transmission board, comes with an onboard CH340 USB TO UART converter, Voltage Level Translator(74HC125V), E22-900T22S/E22-400T22S SMA antenna connector that covers 868MHz/433MHz frequency band ,IPEX antenna connector, LoRa™ Spread Spectrum Modulation technology with auto multi-level repeating.
sbcshop/EnkPi_7.5_Software
EnkPi is a series of 4 ePaper displays mounted on PCBs to provide sturdiness and comfort to the users. Powered with Raspberry Pi Pico W, these EnkPi boards have Partial Refresh Support with up to 170 degrees Wide Viewing Angle. In this github repo will see setup and getting started guide for EnkPi 7.5" series.
sbcshop/NetPi_Pico_Ethernet
NetPi is the perfect solution for your Raspberry Pi Pico's connectivity needs. It's an Ethernet HAT that enables your Pico to easily connect to the internet. With support for various internet protocols such as TCP, UDP, WOL over UDP, ICMP, IPv4, and more, NetPi can create IoT devices, robots, home automation systems, and industrial control systems.
sbcshop/Pico_Universal_E-Paper_HAT_Software
Universal ePaper HAT is based on the Raspberry Pi Pico W which can be attached to any sizes of E-Paper screens ranging from 2.9", 4.2", 5.83" & 7.5". It has dual clips - on top and bottom side of the HAT to attach a display of any dimensions.
sbcshop/3.2_Touchsy_ESP-32_Capacitive_Hardware
Touchsy ESP-32 Capacitive - the perfect display solution for users who prefer ESP-32 over Raspberry Pi Pico W. In this github repo you will find hardware files for 3.2" Touchsy ESP-32 Capacitive.
sbcshop/3.2_Touchsy_HAT_Resistive_Hardware
Touchsy HAT - the perfect solution for users who want to mount the display on their single-board computers. In this github repo you will find hardware files for 3.2" Touchsy HAT Resistive.
sbcshop/3.2_Touchsy_HAT_Resistive_Software
Touchsy HAT - the perfect solution for users who want to mount the display on their single-board computers. This github includes software, library and getting started instruction with details of Touchsy HAT board details.
sbcshop/EnkPi_4.2_Hardware
EnkPi is a series of 4 ePaper displays mounted on PCBs to provide sturdiness and comfort to the users. Powered with Raspberry Pi Pico W, these EnkPi boards have Partial Refresh Support with up to 170 degrees Wide Viewing Angle.
sbcshop/LapPi_2.0_Assembled
LapPi 2.0 - a 100% DIY modular laptop which is compatible with all single board computers. Now that's what we call a true Level-Up.
sbcshop/1.28-Round-LCD-Breakout-Hardware
The 1.28” Round LCD breakout is colorful and easy to experiment with graphics. The display is of 240x240 resolution, IPS display, and 65k RGB colors to create a colorful user interface for your project.
sbcshop/1.28-Round-LCD-Breakout-Software
Pico 1.28” Round LCD HAT is a 1.28-inch display HAT with 240 x 240 resolution, 65K RGB colors, clear and colorful displaying effect, and a joystick, designed for the Raspberry Pi Pico to expand its engagement via SPI communication by providing a standard 40 pin Pico GPIO interface.
sbcshop/3.2_Touchsy_Breakout_Capacitive_Hardware
Touchsy Capacitive Breakout - the perfect display solution for users who prefer using Arduino or other controllers. In this github repo you will find hardware files for 3.2" Touchsy Breakout Capacitive Hardware.
sbcshop/3.2_Touchsy_Breakout_Resistive_Hardware
Touchsy Resistive Breakout - the perfect display solution for users who prefer using Arduino or other controllers. In this github repo you will find hardware files for 3.2" Touchsy Breakout Resistive Hardware.
sbcshop/3.2_Touchsy_ESP-32_Resistive_Hardware
Touchsy ESP-32 Resistive - the perfect display solution for users who prefer ESP-32 over Raspberry Pi Pico W. In this github repo you will find hardware files for 3.2" Touchsy ESP-32 Resistive.
sbcshop/3.2_Touchsy_Pico_W_Capacitive_Hardware
Touchsy Pico W Capacitive - the ultimate display solution for users who want an onboard controller with a versatile programming platform. In this github repo you will find hardware files for 3.2" Touchsy Pico W Capacitive hardware.
sbcshop/3.2_Touchsy_Pico_W_Capacitive_Software
Touchsy Pico W - the ultimate display solution for users who want an onboard controller with a versatile programming platform. This Github provides getting started guide for Capacitive Variant of Touchsy Family.
sbcshop/3.2_Touchsy_Pico_W_Resistive_Software
Touchsy Pico W - the ultimate display solution for users who want an onboard controller with a versatile programming platform. This Github provides getting started guide for Resistive Variant of Touchsy Family.
sbcshop/BME280_Breakout
The BME280 is a popular sensor module that combines temperature, humidity, and barometric pressure measurements in a single package. For a variety of uses, including interior and outdoor navigation, weather forecasting, home automation, and personal health monitoring, it offers precise readings.
sbcshop/EnkPi_5.83_Hardware
EnkPi is a series of 4 ePaper displays mounted on PCBs to provide sturdiness and comfort to the users. Powered with Raspberry Pi Pico W, these EnkPi boards have Partial Refresh Support with up to 170 degrees Wide Viewing Angle.
sbcshop/EnkPi_7.5_Hardware
EnkPi is a series of 4 ePaper displays mounted on PCBs to provide sturdiness and comfort to the users. Powered with Raspberry Pi Pico W, these EnkPi boards have Partial Refresh Support with up to 170 degrees Wide Viewing Angle.
sbcshop/Pi-1.28-Touch-Lcd-HAT-Hardware
Round LCD HAT for Raspberry a luxurious visual experience while accessing the device. This LCD HAT has three components – a Full Touch LCD Display, Touch Panel, and a Joystick to move around with various actions. The Full Touch HD display gives a resolution of 240 x 240 pixels resolution. This 1.28’’ color IPS TFT display panel has a GC9A01A contro
sbcshop/1.14-LCD-Breakout-Hardware
The 1.14” LCD breakout is colorful and easy to experiment with graphics. The display is of 240x135 resolution, IPS display, and 65k RGB colors to create a colorful user interface for your project. The breakout can be powered with 5V or 3.3V, making it versatile with any controller or processor board like Arduino, Raspberry Pi, Pico, STM32, Rock Pi,
sbcshop/1.3-LCD-Breakout-Hardware
The 1.3” LCD breakout is colorful and easy to experiment with graphics. The display is of 240x240 resolution, IPS display, and 65k RGB colors to create a colorful user interface for your project. The breakout can be powered with 5V or 3.3V, making it versatile with any controller or processor board like Arduino, Raspberry Pi, Pico, STM32, Rock Pi,
sbcshop/3.2_Touchsy_Breakout_Capacitive_Software
3.2" Touchsy Capacitive Breakout - the perfect display solution for users who prefer use their favourite Arduino UNO/Mega/Nano or any other controllers. In this github repo you will find details and getting started guide for 3.2" Touchsy Capacitive Breakout.
sbcshop/3.2_Touchsy_Breakout_Resistive_Software
3.2" Touchsy Resistive Breakout - the perfect display solution for users who prefer use their favourite Arduino UNO/Mega/Nano or any other controllers. In this github repo you will find details and getting started guide for 3.2" Touchsy Resistive Breakout.
sbcshop/3.2_Touchsy_Pico_W_Resistive_Hardware
Touchsy Pico W Resistive - the ultimate display solution for users who want an onboard controller with a versatile programming platform. In this github repo you will find hardware files for 3.2" Touchsy Pico W Resistive hardware.
sbcshop/4_channel_IO_Level_Converter_Breakout
This 4-channel & 8-channel input opt isolator board produces clean, regulated 3.3-5V signals on the output side and accepts nominal voltages of 5-24V (maximum of 40V) on the input side. A LOW/grounded state fed into an input will result in a LOW/wrecked state on the output, and vice versa.
sbcshop/EnkPi_2.9_Software
EnkPi is a series of 4 ePaper displays mounted on PCBs to provide sturdiness and comfort to the users. Powered with Raspberry Pi Pico W, these EnkPi boards have Partial Refresh Support with up to 170 degrees Wide Viewing Angle. In this github repo will see setup and getting started guide for EnkPi 2.9" series.
sbcshop/EnkPi_5.83_Software
EnkPi is a series of 4 ePaper displays mounted on PCBs to provide sturdiness and comfort to the users. Powered with Raspberry Pi Pico W, these EnkPi boards have Partial Refresh Support with up to 170 degrees Wide Viewing Angle. In this github repo will see setup and getting started guide for EnkPi 5.83" series.
sbcshop/Pi-1.28-Touch-Lcd-HAT-Software
Round LCD HAT for Raspberry a luxurious visual experience while accessing the device. This LCD HAT has three components – a Full Touch LCD Display, Touch Panel, and a Joystick to move around with various actions. The Full Touch HD display gives a resolution of 240 x 240 pixels resolution. This 1.28’’ color IPS TFT display panel has a GC9A01A contro