sittner/linuxcnc-ethercat

Issues

• add support for lenze i950 devices

  #128 opened 3 months ago by TurBoss
  0

• xenomai3.2.1 not run lcec

  #125 opened 8 months ago by junke365
  0

• generic driver - 8/16 bit signed floats require cast before return not to loose the signal

  #98 opened 10 months ago by plopes9000
  2

• Truncated 16-bit signed integers?

  #112 opened 3 years ago by bobobo1618
  1

• Encoders have no velocity output

  #113 opened 2 years ago by andypugh
  1

• run loadrt lcec in halcmd environment, an error occur that -- Undefined symbol ecrt_slave_config_sdo

  #123 opened a year ago by wujianya
  1

• libethercat not linked

  #61 opened 6 years ago by gbcwbz
  14

• Delta asd-a2-E enable procedure

  #117 opened a year ago by Mehdidadash
  0

• supporting separate LRD/LWR commands instead of an LRW command

  #121 opened a year ago by fdarling
  1

• REAL float writes

  #116 opened 2 years ago by djsftree
  1

•    {0x2511, 0x00, 32}  // external encoder does not exist in delta pdo and sdo's

  #118 opened 2 years ago by Mehdidadash
  1

• LCEC and deasda ethercat not 100% working

  #110 opened 3 years ago by Tezza120
  1

• ASDA-A2-E not responding to vel_cmd (PDO 0x60FF)

  #111 opened 3 years ago by Terence-K
  9

• How build with machinkit-hal and EMCApplication?

  #108 opened 3 years ago by summerlotus513
  4

• How fine tune PLL ?

  #109 opened 3 years ago by serdigi
  1

• absolute encoder with SSI (EL5XXX)

  #107 opened 3 years ago by pyzworld
  0

• Documentation

  #106 opened 3 years ago by satiowadahc
  4

• igh ethercat driver with beaglebone

  #74 opened 5 years ago by lichaowuwei
  19

• Failed to allocate Memory

  #101 opened 3 years ago by satiowadahc
  7

• input ：update-ethercat-config ：Command not found

  #100 opened 3 years ago by curran209
  0

• Unable to make

  #99 opened 3 years ago by curran209
  5

• RTAPI_TASK_PLL_SUPPORT not present

  #81 opened 5 years ago by narogon
  4

• ./debian/linuxcnc-ethercat/usr/lib/linuxcnc/modules/ directory is not created while running dpkg-buildpackage

  #57 opened 6 years ago by tstaroveski
  7

• EL6900 Incompatible PDO Mapping

  #97 opened 4 years ago by safarir
  0

• problem with the integration of the ectty.h library

  #96 opened 4 years ago by robochime
  13

• Unexcepted realtime delay on task 0 with period 1000000

  #94 opened 4 years ago by ibXCM
  2

• emc/task/emctaskmain.cc 3087: can't initialize interpreter

  #93 opened 4 years ago by ibXCM
  2

• Is it support Linuxcnc 2.9 now？

  #92 opened 4 years ago by ibXCM
  11

• Rename project to be LinuxCNC/Machinekit agnostic

  #91 opened 4 years ago by zultron
  0

• A question about xml_config

  #90 opened 4 years ago by ibXCM
  2

• Problems with float. Anybody else?

  #70 opened 4 years ago by sirop
  1

• EL6751 CANOpen configuration in TwinCAT?

  #87 opened 5 years ago by marcoreps
  2

• The PLL patch support RTAI real-time kernel?

  #88 opened 5 years ago by wilsonxiao
  0

• add-ax5805-support updated with new PLL

  #82 opened 5 years ago by robochime
  1

• patches for linuxcnc - 2.8 / 2.9

  #76 opened 5 years ago by robochime
  4

• I wonder how to use linuxcnc-ethercat?Could you please give me a direction for use？

  #65 opened 6 years ago by liuzq71
  4

• ethercat control slave

  #73 opened 5 years ago by suggestawy
  0

• Build from source WARNING: ecrt_.........undefined!

  #72 opened 5 years ago by nguyenanhtucom
  4

• hello, scale AX5000 + sync + lcec_write_idn

  #42 opened 5 years ago by robochime
  11

• how to apply the PLL patch

  #71 opened 5 years ago by robochime
  0

• EL6900 configuration

  #67 opened 6 years ago by robochime
  3

• does the two sentences need to be modified?

  #69 opened 6 years ago by liuzq71
  0

• does these sentense need to be modified?

  #68 opened 6 years ago by liuzq71
  0

• bool nowhere defined

  #63 opened 6 years ago by sirop
  1

• DC synchronization problems

  #45 opened 6 years ago by narogon
  7

• delete this issue please

  #66 opened 6 years ago by narogon
  0

• mffu syncmanger delta asda-a2-e

  #38 opened 7 years ago by fupe
  3

• why the linux dead after i run start in halcmd in few seconds

  #62 opened 6 years ago by cscheng7907
  1

• could not insert module lcec.ko

  #55 opened 7 years ago by ilyaq
  17

• Segmentation fault during shutdown

  #49 opened 7 years ago by sirop
  4