sparkfun/SparkFun-Eagle-Libraries

Issues

• Autodesk killing Eagle

  #360 opened 7 months ago by bsodmike
  2

• Pads for LED-RGB-CA are over lapping

  #359 opened 9 months ago by sonic2wb
  6

• SparkFun-LED DRC Error Overlap

  #132 opened 7 years ago by renorichard
  7

• Create export or howto for KiCAD

  #159 opened 10 months ago by z3cko
  3

• testing

  #329 opened a year ago by SmolBumblebee
  0

• Push updates to library.io

  #326 opened a year ago by toddkrein
  3

• The POWER_JACK_SLOT connector footprint is incorrect.

  #293 opened 2 years ago by FirefoxSystem
  4

• Failure in Eagle Libray LOGIC

  #279 opened 2 years ago by Packmerss
  0

• wrong footprint for WS2812b LED

  #267 opened 2 years ago by Tortoc
  1

• OpenLog Library

  #243 opened 2 years ago by EricAndrechek
  2

• WS2812B-PTH Connections Appear to be Reversed

  #213 opened 3 years ago by slash128v6
  8

• Resistors/Capacitors won't add to sketch (Autodesk Eagle 8.0, Win 10 x64)

  #114 opened 8 years ago by HoarseHorace
  3

• 7486, 7402 logic ic in smd prakage is not found in Logic IC OF SparkFun electronics

  #166 opened 3 years ago by Tan-Kwee-Khuang-alice
  1

• Incorrect footprint for Generic 2012 (0805) package resistor

  #165 opened 3 years ago by bhavisheythapar
  4

• ILD213T pinout incorrect

  #153 opened 3 years ago by mark1010
  2

• Swapped pin numbers on MCP4725 part.

  #147 opened 3 years ago by SFEMark
  3

• DB9 connector is wrongly named/pin 1 marked

  #127 opened 3 years ago by TabajaraLabs
  3

• arduno uno r3 board - outline and pin locations - pin 8 to SCL off by 10 thou!

  #143 opened 3 years ago by Harvolt
  3

• TX/RX swapped between ARDUINO_SERIAL_PROGRAM symbol and 6_PIN_SERIAL_TARGET_SIDE_RA_SMT package.

  #126 opened 3 years ago by damellis
  1

• LED fails to load in 8.6.0 - incorrect XML

  #131 opened 3 years ago by uzytkownik
  4

• Can't select a component from SparkFun-Sensors.lbr

  #148 opened 3 years ago by vredzhepov
  5

• TRRS connectors have duplicate pin name "ring"

  #158 opened 3 years ago by fxkr
  1

• Pro Micro incorrect pin assignments

  #122 opened 3 years ago by japalmer
  2

• Micromod library alignment clarification

  #157 opened 3 years ago by dazhbog
  3

• Sparkfun-Connectors.lbr

  #160 opened 3 years ago by RobynWillison
  1

• BATTERY_18650-HOLDER package tRestrict

  #124 opened 3 years ago by lloydXmas
  1

• V_REG_LD1117VXX has wrong package.

  #120 opened 3 years ago by cmfrancis
  1

• Fix name of nRF52832 breakout board #128

  #164 opened 3 years ago by PaulZC
  1

• Sensor.lbr redefinition of name 'AS726X' in tag <deviceset> error

  #146 opened 4 years ago by edgarlz123
  5

• Error with SparkFun-Sensors.lbr - Photocell and IR Sensor (QRE1113)

  #144 opened 6 years ago by mackhina
  1

• Missing RN-42 from library

  #118 opened 4 years ago by raveious
  1

• Cannot find Artemis Module in IC-Microcontrollers

  #150 opened 5 years ago by Colin-at-511100471793
  2

• It's difficult to use Assembly Variants with most of the passives.

  #151 opened 5 years ago by nuket
  0

• Request to include MPL3115A2 Breakout in library

  #112 opened 6 years ago by ToniCorinne
  1

• library.io 3D Models

  #134 opened 6 years ago by Michael-Bell
  1

• Incorrect pinout for BME680!

  #136 opened 6 years ago by kikolobo
  1

• How to wire the ICSP pads for Mega 2560 Foorprint?

  #137 opened 6 years ago by Blacksheep70
  2

• Device ATMEGA168 has unconnected pin

  #140 opened 6 years ago by AlexRochelle
  1

• Device PCA9615 Incorrect Pinout

  #142 opened 6 years ago by RossDuquette
  1

• SparkFun-Capacitors (Version 1) PANASONIC_D (Version 1)

  #141 opened 6 years ago by sonic2wb
  1

• Pad Sizes for 0402 Resistors and Resistors Are Much Larger than Actual Component

  #135 opened 6 years ago by hoilett
  1

• SparkFun-Switches.lbr

  #133 opened 7 years ago by netenabled
  0

• Need description of libraries in readme!!!

  #125 opened 7 years ago by Omcsesz
  2

• Please give different names to the Thing's two 3V3 pins

  #130 opened 7 years ago by bonzini
  0

• Conversion of Libraries for Use with an OSS EDA Suite

  #116 opened 8 years ago by leee
  1

• Resistors separated into different parts?

  #113 opened 8 years ago by adwaitnd
  1

• Fiducial packages need tKeepout (aka courtyards) of at least 10 mils clearance

  #111 opened 8 years ago by lewispg228
  4

• Add foot print for nRF52832 Breakout

  #109 opened 8 years ago by brmitchell04
  1

• Create footprint for SparkFun MS5803-14BA

  #105 opened 8 years ago by lizgreenwood
  1

• V_REG_SP6214 shows BP pin that doesn't exist

  #101 opened 8 years ago by nseidle
  2