any and all software packages used in the development of an Autonomous Hexacopter, with the aim of achieving basic autonomous capabilities along with autonomous battery swapping, facilitated by the PX4-Autopilot FMU firmware, ROS2, and their dependancies.
NOTE: This repo is mean't for use with ROS2 Foxy on Ubuntu 20.04 LTS. Make sure you have these installed correctly by following this guide before continuing with this one! You can also use this repository with our new development Docker container, hexacopter-env, with setup instructions for Docker and it (on all platforms) here.
If you would like to use this repository in a catkin/colcon workspace, simply clone it into the src/ directory from the workspace root:
git clone --recurse-submodules git@github.com:uga-robotics/AutonomousHexacopter.git src/AutonomousHexacopter
For development purposes, you'll need to checkout our development branches to track changes to any of the submodules (PX4-Autopilot, px4_ros_com). For the PX4-Autopilot submodule, navigate into the PX4-Autopilot directory and execute:
git checkout uga-dev
For the PX4-Msgs submodule, navigate to the PX4-Msgs directory and execute:
git checkout a635d9d827ac36a51411e03b9b8eb25a599dc734
For the px4_ros_com submodule, navigate to the px4_ros_com directory and execute:
git checkout uga-dev
We'll be tracking changes to px4_ros_com and PX4-Autopilot on our fork's uga-dev branch, which will act as our master/main branch for the project, we'll likely only be changing the uorb_rtps_message_ids.yaml file (generated from the python script in the PX4-Autopilot repo).
There are two ways, to setup a working environment for the project: Using our Docker Container or using a native Linux installation. Either method will work as long as you follow the instructions carefully.
When using the Docker Container all of the dependancies and setup are done for you. You just need to clone this repository to your machine (or in WSL) and hand the launch script a path to the workspace to get started.
Once you clone the repository, navigate to the scripts directory and run the install_deps.sh script like so:
sudo ./install_deps.sh
After that, install FastRTPS and FastRTPSGen by either navigating to the scripts directory and running rtps_install.sh like so:
sudo ./rtps_install.sh
or by following the instructions found here to install FastRTPS and FastRTPSGen via Linux Binaries or here to install them via Sources. Although the binaries are available, we recommend to build and install the code from source, given that the binaries may not come with required components and dependencies in place. Note that this step is critically important, as FastRTPS and FastRTPSGen allow the Pixhawk 4 to communicate with ROS2.
After making sure the git submodules are properly initialized and updated (the directories are not empty) and installing the required dependancies, you should be able to build the ROS2 workspace with colcon as shown below. Navigate to the root of the workspace (above src) and execute the following command, making sure ROS2 is sourced:
colcon build --symlink-install --packages-skip px4 --event-handlers console_direct+
To run the stock Software In The Loop (SITL) Gazebo simulation, with an example quadcopter, navigate to the PX4-Autopilot directory and execute the command:
make px4_sitl_rtps gazebo
This will build an SITL version of the PX4 firmware with RTPS enabled, then launch and connect with the stock quadcopter (specifically an IRIS quadcopter) Gazebo simulation window. The terminal will then be displaying the PX4 terminal, from which we can run:
micrortps_client start -t UDP
To start the RTPS client on the PX4 firmware.
Next, to start the ROS2 side of the bridge, make sure the ROS2 workspace is built, then source the install/setup.bash script to include the built files/executables. Now from the root directory of the workspace, run:
micrortps_agent -t UDP
Which should display some output pertaining to the topics subscribed to and published to.
Then, run any ROS2 executable connecting to the bridge, as an example we'll use the sensor_combined_listener executable from the px4_ros_com package. Again, execute the command from the root of the workspace:
ros2 launch px4_ros_com sensor_combined_listener.launch.py
You should see some nominal data coming fom the sensor_combined uORB topic on the PX4!
NOTE: If you have made changes to any of the submodules (PX4-Autopilot, PX4-msgs, px4_ros_com, etc.), make sure to navigate into their respective directories and push those changes BEFORE attempting to push changes in the main repository.
More information on using/working with Git can be found here
And more information on working with Git Submodules specifically can be found here