Aceinna/python-openimu

Issues

• Can't connect to device with Firefox

  #92 opened a year ago by myoresh
  0

• Get data from INS over ethernet or UART in real time and parse with Python to get pose data

  #91 opened a year ago by smithan7
  0

• Get the real time data locally without connecting to the internet

  #90 opened a year ago by CSUN1997
  1

• Change orientation of the OpenIMU axis

  #85 opened 2 years ago by Ahmad-Drak
  2

• Error message when I run "openimu parse"

  #77 opened 3 years ago by k2ironman
  1

• Python driver usage

  #35 opened 3 years ago by matteocutugno
  1

• No serial port found

  #36 opened 3 years ago by ydzou
  1

• error message when run "ans-devices.exe parse -p ....."

  #72 opened 3 years ago by fei4xu
  1

• How to change nmea data log frequency in web or pythondriver-win?

  #71 opened 3 years ago by fei4xu
  4

• Openrtk300l

  #45 opened 4 years ago by saraswathi-sirikonda
  3

• Openrtk330 cannot display data on OpenRTK Monitor

  #39 opened 4 years ago by SwingW
  14

• bootstrap/cli -- NameError: name 'x' is not defined

  #41 opened 4 years ago by jgladen
  1

• OpenIMU Connected, but Website says discconnected

  #40 opened 4 years ago by kevindean
  3

• Find Port but Cannot Connect (for device openimu300ri)

  #38 opened 4 years ago by kevindean
  3

• Bootloader code may sent the CRC in a wrong way (?)

  #37 opened 5 years ago by carmelodfr
  2

• Azure blob storage functional update

  #27 opened 5 years ago by sulkytejas
  1

• Some browser can't access ws protocol under https

  #1 opened 5 years ago by m5horton
  5

• zT has no graph

  #2 opened 5 years ago by m5horton
  2

• conflict in record between WS version and CLI

  #5 opened 5 years ago by m5horton
  2

• get xxx shows nothing in CLI

  #9 opened 5 years ago by dxg-aceinna
  3

• Unknown application names

  #20 opened 5 years ago by joem-at-aceinna
  0

• Issue with RPi4, /dev/ttyAMA0 vs /dev/serial0

  #26 opened 5 years ago by SinginAlong
  2

• cannot connect issue with 330 unit new firmware 1.1.1

  #25 opened 5 years ago by yifanff
  1

• data not plotting on web

  #24 opened 5 years ago by m5horton
  1

• Python-openimu Ubuntu driver

  #23 opened 5 years ago by FarhadMir
  7

• openimu.json accel units wrong

  #22 opened 5 years ago by m5horton
  1

• command: exit then get a error(after server_start)

  #17 opened 5 years ago by blueshu
  2

• SyntaxError:invalid syntax

  #15 opened 5 years ago by Linbo2018
  1

• Meet an error when run command "upgrade "

  #14 opened 5 years ago by ysong-aceinna
  2

• command "stop" may trigger an error

  #13 opened 5 years ago by ysong-aceinna
  3

• No response when run command "get orien"

  #12 opened 5 years ago by ysong-aceinna
  2

• No warning msg when I run error command "get xxxxx"

  #11 opened 5 years ago by ysong-aceinna
  2

• the unit in the plot for web GUI has problems

  #7 opened 5 years ago by yydgis
  2

• web-side connect issues

  #16 opened 5 years ago by blueshu
  3

• Can't display new data file in "My Files" page

  #10 opened 5 years ago by ysong-aceinna
  3

• Logging files without logging in

  #8 opened 5 years ago by dxg-aceinna
  1

• Record issue

  #21 opened 6 years ago by Linbo2018
  0

• Stop command response "Hanging" at prompt

  #19 opened 6 years ago by joem-at-aceinna
  2

• Error upon issuing "exit" command

  #18 opened 6 years ago by joem-at-aceinna
  1

• no successfully updated message on set

  #4 opened 6 years ago by m5horton
  1

• stuck in bootloader mode after firmware upgrade

  #6 opened 6 years ago by m5horton
  1

• stop_server disappeared

  #3 opened 6 years ago by m5horton
  1