BotoX/xiaomi-m365-compatible-bms

Issues

• Development of Bafang UART BMS

  #61 opened a year ago by iamniels
  4

• Scooter won't turn off - with Pro 2 ESC, Pro 1 BLE

  #59 opened 2 years ago by norbbyte
  1

• Arduino bms

  #60 opened 2 years ago by Zanooon97
  2

• JBD-SP20S001 v1.7 20S BMS

  #44 opened 4 years ago by JakubRybakowski
  10

• SP15S051 v1.0 BMS?

  #58 opened 2 years ago by hoboct
  2

• Recover from OCD

  #53 opened 3 years ago by pgruber75
  33

• General question about chipset and compatibility over original bms

  #57 opened 2 years ago by gabgabe
  0

• Recover from cut the trace (Yes I am stupic I didnt read about it ~2 years ago or this warning was not there :-))

  #55 opened 2 years ago by AdamWeglarz
  12

• Low voltage reset doesn't work

  #56 opened 3 years ago by Vladi14AK
  1

• Is it possible to change values with bootloader.py with usbasp?

  #54 opened 3 years ago by AdamWeglarz
  0

• Unknown issue

  #52 opened 3 years ago by kalski44
  0

• External battery 8000mAh 10S4P BMS MOD?

  #51 opened 3 years ago by DJAndyBoy
  0

• Issues Python serial communication

  #26 opened 4 years ago by TorstenE81
  3

• Problem collect2.exe: error: ld returned 1 exit status

  #50 opened 3 years ago by Adri-Dax
  2

• V1.7 BMS wiring problem/uploading firmware

  #48 opened 3 years ago by clemtrinc
  1

• Go back to stock firmware

  #49 opened 3 years ago by mbryde
  0

• Alternatives for JBD-SP15S001?

  #43 opened 4 years ago by IuliuNovac
  5

• 13s bms on aliexpress

  #47 opened 3 years ago by Marol92
  0

• Bosch e-bike compatible BMS

  #46 opened 4 years ago by scraphero
  0

• 12s questions.

  #45 opened 4 years ago by klyrre
  0

• Is it possible to do smart bms with more 30A ? For example 40 or 60A ?

  #41 opened 4 years ago by g4seb
  5

• Update code for Ninebot ESx

  #16 opened 5 years ago by Neo003
  5

• Error "Cant open device /dev/ttyUSB0

  #42 opened 4 years ago by Hazuka
  4

• New issue, after some time of usage

  #40 opened 4 years ago by kalski44
  2

• Charging improvements

  #39 opened 4 years ago by NetBUG
  3

• 13s BMS?

  #10 opened 5 years ago by FalloutBe
  17

• Wiring

  #32 opened 4 years ago by tbone-rd
  3

• 1% battery, and scooter engine off with still 3,6V cell

  #36 opened 4 years ago by kalski44
  3

• SP15S020 BMS

  #15 opened 5 years ago by abcheng
  10

• Added 2s, got 44.6kmh with default motor constant but no torque uphills

  #38 opened 4 years ago by cptX
  0

• Why the 12s is the limit for the controller?

  #37 opened 4 years ago by cptX
  2

• Scooter is turning off during hard braking

  #35 opened 4 years ago by kalski44
  1

• Very slow charging

  #34 opened 4 years ago by tbone-rd
  2

• Unknown (communication with ESC?) issue

  #33 opened 4 years ago by kalski44
  22

• Low voltage

  #31 opened 4 years ago by kalski44
  2

• RX TX connection with m365 board

  #30 opened 4 years ago by kalski44
  0

• Firmware upload

  #29 opened 4 years ago by kalski44
  3

• Gallery missing

  #28 opened 4 years ago by tbone-rd
  1

• Issues uploading firmware

  #25 opened 4 years ago by nick9one1
  2

• Stock BMS

  #27 opened 4 years ago by Bilal9751
  0

• Noob Guide for BMS flashing/configuring

  #24 opened 5 years ago by HussoFPV
  0

• Сlock generator

  #12 opened 5 years ago by Elsta
  9

• optiboot.diff file link not found (404 error )

  #23 opened 5 years ago by IonicEV
  0

• Stock BMS M365 PRO - 10s10p battery?

  #22 opened 5 years ago by GivvHub
  0

• nand clip usage possible for 1.5 bms ?

  #18 opened 5 years ago by ercintorun
  0

• Bad BMS password issue

  #17 opened 5 years ago by AdamWeglarz
  1

• capacity configuration with additional BMS and battery pack

  #11 opened 5 years ago by AdamWeglarz
  7

• Choosing power supply

  #13 opened 5 years ago by alexeypetrenko
  2

• UVP Doesn't recover

  #8 opened 5 years ago by ryci-us
  6

• bq769x0::nominalCapacity calculation

  #9 opened 5 years ago by stefan064
  0