EPFLRocketTeam/SupersonicTestRocket

Issues

• Add basic telemetry capabilities

  #1 opened 3 years ago by joshdboss
  3

• Make the serial console printing work with the new packets

  #12 opened 3 years ago by joshdboss
  2

• Write the wrapper for the GPS

  #41 opened 3 years ago by joshdboss
  2

• Modify the code to save filenames with the date and time

  #46 opened 3 years ago by joshdboss
  1

• Test the GPS on the board

  #42 opened 3 years ago by joshdboss
  1

• Add a battery management system (BMS)

  #14 opened 3 years ago by joshdboss
  0

• RF Budget

  #27 opened 3 years ago by joshdboss
  0

• Test the load cell

  #48 opened 3 years ago by joshdboss
  0

• Add an RTC to the Teensy

  #18 opened 3 years ago by joshdboss
  0

• Add a load cell to measure rocket's thrust directly

  #17 opened 3 years ago by joshdboss
  1

• Write the load cell wrapper

  #47 opened 3 years ago by joshdboss
  0

• Write the wrappers for Wildhorn

  #44 opened 3 years ago by joshdboss
  1

• Test the wildhorn sensor board

  #45 opened 3 years ago by joshdboss
  0

• Add Wildhorn's sensor board to the PCB

  #5 opened 3 years ago by joshdboss
  0

• Shrink the PCB to fit within 100x38mm

  #2 opened 3 years ago by joshdboss
  4

• Test the reed switch starting mechanism

  #43 opened 3 years ago by joshdboss
  0

• Add an easy method to start the avionics without having to open the rocket

  #15 opened 3 years ago by joshdboss
  0

• Add GPS capabilities to the PCB

  #7 opened 3 years ago by joshdboss
  0

• Build the rocket fuselage

  #38 opened 3 years ago by joshdboss
  0

• Build the rocket fins

  #39 opened 3 years ago by joshdboss
  0

• Ejection tests

  #40 opened 3 years ago by joshdboss
  0

• Energy budget

  #26 opened 3 years ago by joshdboss
  0

• Preliminary design of the avionics bay

  #9 opened 3 years ago by joshdboss
  2

• Design a proper wire harness

  #8 opened 3 years ago by joshdboss
  3

• Preliminary design of the motor retainer and load cell assembly

  #16 opened 3 years ago by joshdboss
  1

• Document the c++ code using Doxygen

  #3 opened 3 years ago by joshdboss
  5

• Test the interface between the board and the Altimax

  #13 opened 3 years ago by joshdboss
  1

• Parachute selection

  #21 opened 3 years ago by joshdboss
  5

• Select a material for the fuselage

  #20 opened 3 years ago by joshdboss
  1

• Redesign the static pressure port

  #29 opened 3 years ago by joshdboss
  0

• Size and design a shear pin system

  #25 opened 3 years ago by joshdboss
  0

• Redesign nosecone

  #24 opened 3 years ago by joshdboss
  0

• Improve the thermocouple connectors

  #23 opened 3 years ago by joshdboss
  0

• Design the fly-away launch lugs

  #22 opened 3 years ago by joshdboss
  0

• Determine the mission profile

  #19 opened 3 years ago by joshdboss
  0

• Final design and CAD of the avionics bay

  #10 opened 3 years ago by joshdboss
  0

• CAD of the motor retainer assembly

  #28 opened 3 years ago by joshdboss
  0

• Fix current bugs with the avionics

  #11 opened 3 years ago by joshdboss
  0

• Interface with Wildhorn's sensor board on the software side

  #6 opened 3 years ago by joshdboss
  0

• Figure out how to document the Python code using Doxygen

  #4 opened 3 years ago by joshdboss
  0