Lenti84

Lenti84's Stars

• OpenEMS/openems

  OpenEMS - Open Source Energy Management System

  Language:Java87441178411

• emsesp/EMS-ESP32

  ESP32 firmware to read and control EMS and Heatronic compatible equipment such as boilers, thermostats, solar modules, and heat pumps

  Language:C++658161k113

• ardyesp/ESPWebDAV

  Wifi WebDAV server using ESP8266

  Language:C++3273322162

• Uksa007/esphome-jk-bms-can

  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon

  17721035

• klatremis/esphome-for-deye

  Esphome component for Deye 3 phase inverters for Home Assistant

  150243934

• shining-man/bsc_fw

  Firmware battery safety controller (BSC)

  Language:C++1102212119

• Xinyuan-LilyGO/T-CAN485

  Language:C++105182933

• syssi/esphome-soyosource-gtn-virtual-meter

  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter

  Language:C++80108125

• ArminJo/JK-BMSToPylontechCAN

  Converts the JK-BMS RS485 data to Pylontech CAN data

  Language:C++708811

• KlausLi/Esp-HuaweiR4850-Controller

  Esp-HuaweiR4850-Controller Das Huawei R4850G2 Recitfier Modul ist ein 3000Watt Lade Netzteil. Es kann über Datenkommunikation gesteuert werden. Die Software "Esp-HuaweiR4850-Controller" kann dieses Huawei dann automatisch je nach PV Überschuss steuern. Der Photovoltaik Solar Überschuss z.B. eines Balkonkraftwerks wird in die Batterie geladen

  572208

• budulinek/arduino-altherma-controller

  Arduino-based controller for Daikin Altherma heat pumps. The controller connect to the Altherma heat pump via P1/P2 bus, has a built-in webserver for configuration (of the controller itself). Integration to Loxone home automation system via UDP protocol, allows you to monitor and control your Altherma heat pump.

  Language:C++5310511

• Lenti84/VdMot_Controller

  Controller for HmIP-VdMot actuators

  Language:C++53186015

• the6p4c/Flatpack2

  Software, hardware and protocol information for the Eltek Flatpack2.

  Language:C++459418

• juamiso/PYLON_EMU

  Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)

  Language:Python4214310

• maxx-ukoo/jk-bms2pylontech

  JK BMS to PYLON CANBUS Protocol converter

  Language:C336210

• salakrzy/DTSU666_CHINT_to_HUAWEI_translator

  This project uses ESP32 to translate MODBUS messages of CHINT's DTSU666 Energy Meter into HUAWEI DTSU666H format

  Language:C++29669

• Bunicutz/ESP32_Midea_RS485

  Language:C++194146

• VeliML/MitsuRunner

  ESP Home configuration file for ESP devices made for preventing Mitsubishi heatpumps to do too short heating runs and melt ice too often-

  Language:C116167

• Zeppelin500/ArduHeatPumpControl

  Arduino based heat pump control unit with touch screen

  Language:C++11300

• mincequi/iotic

  iotic is an IoT device manager which is dead simple to use. Its main feature is pv surplus charging of your electric vehicle.

  Language:C++102242

• tomvanklinken/Flatpack2

  Language:C++10212

• Lennart-O/ESP32_ELTEK_FLATPACK

  Eltek Flatpack Charger for an electric scooter

  Language:C++8204

• plieningerweb/kacors485

  Python library to retrive and parse information from kaco inverters over serial interface

  Language:Python6212

• neggles/flatpack2s2

  Language:C5214

• embedded4ever/KacoInverterTest-ReadTool

  Reading and testing program for KACO brand inverters

  Language:C#4201

• roelof4/Ohmpilot

  Reverse engineering Fronius Ohmpilot communication

  3200

• xjamesmorris/fp_util

  Yet another control utility for the Eltek Flatpack2 power supply

  Language:C++3112

• 3s1d/ACACbattery

  Stores solar engergie (AC) and releases it (AC) in case needed

  Language:C++2100

• Tom-evnut/Eltek-Charger-Programming

  Language:C++2101

• pizmus/KacoPowadorRS232

  FHEM module that reads data from the RS232 interface of Kaco Powador solar inverters

  Language:Perl1100